Abstract
The results of the first studies that established a correlation between impact ductility and coercivity are considered in this review. The data of studies on the search for the factors that encourage or inhibit this correlation are analyzed. The methods based on estimation of the coercivity, which ensure increased reliability of nondestructive testing of rolled steel with a tendency toward brittle fracture, are discussed. The experimental data on nondestructive tests of impact ductility carried out using a sharp notch are analyzed.
Similar content being viewed by others
REFERENCES
Bida, G.V., Nondestructive Testing of Mechanical Properties of Steel Rolled Stock—A Review: I. Testing of Strength and Plastic Properties, Defektoskopiya, 2005, no. 5, pp. 39–52 [Rus. J. of Nondestructive Testing (Engl. Transl.), 2005, vol. 41, no. 5, pp. 296-306].
Bida, G.V., Mikheev, M.N., and Neizvestnov, B.M., An Instrument for Testing Quality of Thermal and Thermochemical Treatment of Steel and Cast-Iron Parts by Apparent Residual Magnetization, Defektoskopiya, 1973, no. 6, pp. 103–104.
Bida, G.V., The Calculation of a Coercimeter with Internal Negative Feedback, Defektoskopiya, 1974, no. 5, pp. 114–121.
Aronson, E.V., Bida, G.V., Kamardin, V.M., Mikheev, M.N., and Samokhvalova, L.Z., On the Possibility of Non-destructive Testing of Impact Elasticity of Low-Carbon and Low-Alloy Steel Rolled Stock, Defektoskopiya, 1978, no. 6, pp. 66–72.
Aronson, E.V., Bida, G.V., Kamardin, V.M., Mikheev, M.N., Samokhvalova, L.Z., and Tsar’kova, T.P., On Investigation of the Possibility of Nondestructive Testing of Impact Elasticity of Low-Carbon and Low-Alloy Steel Rolled Stock, Defektoskopiya, 1980, no. 5, pp. 48–59.
Kamardin, V.M. and Bida, G.V., Vliyanie tekhnologii prokatki na kharakter svyazi mekhanicheskikh svoistv stalei 09Γ2, 20K, Cm3cn s koertsitivnoi siloi (Effect of Rolling Technology on the Relation between Mechanical Properties and the Coercive Force of 09Γ2, 20K, CΤ3cΠ Steels), Available from VINITI, 1987, Moscow, no. 235-V88.
Bida, G.V., Kamardin, V.M., Using Magnetic Properties Related to Reversible Processes upon Magnetization for Nondestructive Testing of Viscous Properties of Rolled Stock, Defektoskopiya, 1990, no. 11, pp. 50–56.
Bida, G.V. and Kamardin, V.M., Nondestructive Testing of Viscous Properties of Rolled Stock, Defektoskopiya, 1991, no. 7, pp. 10–21.
Bida, G.V. and Kamardin, V.M., Physical Grounds for Testing Impact Elasticity of Low-Carbon and Low-Alloy Steel Rolled Stock, Defektoskopiya, 1995, no. 10, pp. 3–31.
Gulyaev, A.P., Udarnaya vyazkost’ i khladnolomkost’ konstruktsionnoi stali (Impact Elasticity and Cold Brittleness of Structural Steel), Moscow: Mashinostroenie, 1969.
Georgiev, M.N., Vyazkost’ malouglerodistykh stalei (Viscosity of Low-Carbon Steels), Moscow: Metallurgiya, 1973.
Stoloff, N.S., Effect of Alloying on Fracture Characteristics, in Razrushenie (Fracture), Moscow: Metallurgiya, 1976, vol. 6, pp. 11–89.
Beaucher, J.H., Grozier, J., and Enrietto, J.F., Strength and Ductility of Hot-Rolled Ferrite-Pearlite Steels, in Razrushenie (Fracture), Moscow: Metallurgiya, 1976, vol. 6, pp. 246–259.
Drege, V., Stal’ kak konstruktsionnyi material (Steel as a Structural Material), Moscow: Metallurgiya, 1967.
Tikhonov, A.S., Elementy fiziko-khimicheskoi teorii deformiruemosti splavov (Elements of Physical-Chemical Theory of Alloy Deformability), Moscow: Nauka, 1972.
Pickering, F.B., Physical Metallurgy and Design of Steels, London: Applied Science, 1978. Translated under the title Fizicheskoe metallovedenie i razrabotka stalei, Moscow: Metallurgiya, 1982.
Gulyaev, A.P. and Neverova-Skobeleva, N.P., Effect of Carbon on the Location of the Critical Brittleness Range, Metalloved. Term. Obrab. Met., 1957, no. 4, pp. 17–21.
Kostin, V.N. and Bida, G.V., MC-2 Magnetic Structure Analyzer, Defektoskopiya, 1989, no. 2, pp. 21–24.
Bida, G.V., Tsar’kova, T.P., and Mikheev, M.N., Study of the Operation of the Sensor of an Instrument for Testing Quality of High-Temperature Tempering of Articles, Defektoskopiya, 1981, no. 7, pp. 5–12.
Mikheev, M.N., Bida, G.V., Tsar’kova, T.P., and Kostin, V.N., Investigation of Magnetization-Reversal Modes during Testing the Quality of Quenched and Tempered Articles by the Magnitude of Residual Magnetic Induction, Defektoskopiya, 1982, no. 8, pp. 69–79.
Bida, G.V., Gorkunov, E.S., and Shevnin, V.M., Magnitnyi kontrol’ mekhanicheskikh svoistv prokata (Magnetic Inspection of Mechanical Properties of Roll Stock), Yekaterinburg: Ural. Otd. Ross. Akad. Nauk, 2002.
Mikheev, M.N., Kamardin, V.M., Bida, G.V., Aronson, E.V., and Livshits, A.A., Magnetochemical Method for Evaluating the Aptitude of Low-Carbon and Low-Alloy Steel Rolled Stock to Brittle Fracture, Defektoskopiya, 1982, no. 5, pp. 74–77.
Vais, I.A., Sotnikov, V.K., Bashkirov, Yu.P., and Bida, G.V., The Development of Magnetic Inspection of Mechanical Properties of 20ΦTЛ Steel Grade, Defektoskopiya, 1990, no. 3, pp. 24–29.
Leont’ev, B.A. and Buzovskii, Yu.N., Mechanical Properties of a Steel with Widmanstatten Structure, Metalloved. Term. Obrab. Met., 1968, no. 11, pp. 76–79.
Mikheev, M.N., Kamardin, V.M., Bida, G.V., and Aronson, E.V., Integration of Methods of Nondestructive Testing and Statistical Prediction of Mechanical Properties of Steel Rolled Stock, Defektoskopiya, 1985, no. 5, pp. 45–48.
GOST (State Standard) 5639-82: Steel and Alloys. Methods for Detection and Determination of Grain Size, 1982, Supplement 4.
Obraz, N., Moznost vyusiti ultrazvuku pro sjistovani stredni velikosti zrn structuri, Ocalove trubky, 1977, vol. 24, no.5, pp. 324–326.
Kesler, N.A., Pranitskii, A.A., Shmurin, Yu.A., Eichina, V.G., Instruments for Determination of Ultrasound Attenuation in Solid Materials, Defektoskopiya, 1977, no. 5, pp. 129–132.
OST (Branch Standard) 14-1-184-65: Nondestructive Method for Testing Mechanical Properties of Rolled Stock and Pipes, 1965.
TU (Technical Specifications) 14-1016-74: Deformed Steel. Methods of Nondestructive Testing of Mechanical Properties, 1974.
GOST (State Standard) 30415-96: CIS International Standard. Nondestructive Testing of Mechanical Properties and Microstructure of Steel Products by Magnetic Method, 1996.
Author information
Authors and Affiliations
Additional information
__________
Translated from Defektoskopiya, Vol. 41, No. 5, 2005, pp. 53–76.
Original Russian Text Copyright © 2005 by Bida.
Rights and permissions
About this article
Cite this article
Bida, G.V. Nondestructive Testing of Mechanical Properties of Rolled Steel (Review): 2. Testing of Ductile Properties. Russ J Nondestruct Test 41, 307–323 (2005). https://doi.org/10.1007/s11181-005-0170-1
Received:
Issue Date:
DOI: https://doi.org/10.1007/s11181-005-0170-1