The article presents a comprehensive assessment of the technical condition of heat engineering units on-line, taking into account the operating factors. The value of the residual life of the lining of a steel-pouring ladle after 30 melts has been determined. The calculated results have been compared with the results of equipment operation. Adaptation of a comprehensive assessment of the residual life for the lining of 25-ton steel-pouring ladles allows speaking about the possibility of its application to assess the residual life of the refractory layer for a wide class of high-temperature units.
Similar content being viewed by others
References
R. Z. Aminov and A. I. Kozhevnikov, “Optimization of the operating conditions of gas-turbine power stations considering the effect of equipment deterioration,” Therm. Eng., 64(10), 715 – 722 (2017).
A. N. Smirnov, G. G. Nemsadze, K. N. Sharandin, et al., “Rotary furnace for comparative evaluation of heating unit refractory object erosion resistance,” Refract. Ind. Ceram., 59(2), 227 – 230 (2018).
J. Okrajni, “Thermo-mechanical fatigue conditions of power plant components,” J. Achiev. Mater. Manuf. Eng., 33(1), 53 – 61 (2009).
Y. M. Gordon, A. Sadri, K. V. Mironov, and N. A. Spirin, “Diagnostics of blast-furnace linings,” Steel Transl., 47(8), 517 – 522 (2017).
Y. Ge, Y. Li, H. Wei, et al., “A novel approach for measuring the thickness of refractory of metallurgical vessels,” Materials, 13(24), 5645 (2020).
K. X. Jiao, J. L. Zhang, Z. J. Liu, “Analysis of blast furnace hearth sidewall erosion and protective layer formation,” ISIJ Int., 56(11), 1956 – 1963 (2016).
M. Volkov, A. Kibkalo, A. Vodolagina, and V. Murgul, “Existing models of residual life assessment of structures and their comparative analysis,” Procedia Engineer., 165, 1801 – 1805 (2016).
I. A. Danyushevskii, E. V. Georgievskaya, S. N. Gavrilov, and L. D. Vlasova, “On assessment of strength and lifetime of power equipment in terms of modern capabilities,” Nadezhn. Bezop. Energet., 10(3), 237 – 242 (2017).
I. Perez, I. Moreno-Ventas, R. Parra, and G. Rios, “Post-mortem study of magnesia-chromite refractory used in a submerged arc furnace in the copper-making process,” JOM, 70(11), 2435 – 2442 (2018).
A. S. Nikiforov, E. V. Prikhod’ko, A. K. Kinzhibekova, and A. E. Karmanov, “Investigation of the dependence of refractory thermal conductivity on impregnation with a corrosive medium,” Refract. Ind. Ceram., 60(5), 463 – 467 (2020).
O. V. Goryunov and S. V. Slovtsov, “Calculation-experimental substantiation of vibration strength of NPP pipelines based on the quasi-static approach,” Nadezhn. Bezop. Energet., 10(4), 304 – 309 (2017).
A. A. Kondrukevich and D. V. Ryabyi, “Effect of operational factors on steel-teeming ladle lining working layer life,” Refract. Ind. Ceram., 58(5), 469 – 474 (2018).
V. A. Arutyunov, V. V. Bukhmirov, and S. A. Krupennikov, Mathematical Simulation of Thermal Operation of Industrial Furnaces [in Russian], Metallurgiya, Moscow (1990).
A. A. Griffith, “The phenomenon of rupture and flow in solids,” Philos. T. Roy. Soc. A, 221(4), 163 – 198 (1920).
The research was carried out with the financial support of the Science Committee of the Ministry of Education and Science of the Republic of Kazakhstan (Grant No. AP09561854).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Novye Ogneupory, No. 2, pp. 61 – 66, January, 2022.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Nikiforov, A.S., Prikhodko, E.V., Kinjibekova, A.K. et al. Comprehensive Assessment of the Residual Life of Refractory Materials of High-Temperature Units. Refract Ind Ceram 63, 105–109 (2022). https://doi.org/10.1007/s11148-022-00688-8
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11148-022-00688-8