The results of the development of heat-resistant concrete compositions based on technogenic raw materials are presented for assembling the shoulders of aluminum electrolyzers. It is been established that use of refractory filler based on the “ideal” screening curve provides concrete preparation with high quality parameters.
Similar content being viewed by others
References
G. V. Galevskii, N. M. Kulagin, M. Ya. Mintsis, and G. A. Sirazutdinov, Aluminum Metallurgy. Technology, Electrical Supply, and Automation; High School Handbook [in Russian], Nauka, Moscow (2008).
V. V. Pingin, A. V. Zavadyak, G. V. Arkhipov, et al., “High-ampere technology RUSAL – 8 years of dynamic development,” Second Internat Congress “Nonferrous metals – 2010”, Verso, Krasnoyarsk (2010).
OAO Rusal Company — official site, access regime: http//www.rusal.ru.
Yu. V. Borisoglebskii, G. V. Galevskii, N. M. Kulagin, et al., Aluminum Metallurgy [in Russian], Nauka, Novosibirsk (2000).
I. V. Gladkykh, “Evaluation of the quality of Kuzbas technogenic raw material for producing refractories and heat insulation materials,” Ékol. Prom. Prom. Rossii, 20(7), 13 – 17 (2016).
Yu. E. Pivinskii, Rheology of Dispersed HCBS and Ceramic Concrete Systems. Elements of nanotechnology in Silicate materials Science, Vol. 3 [in Russian], Politeknika, St. Petersburg (2012).
I. D. Kashcheev, K. K. Strelov, and P. S. Mamykin, Refractory Chemical Technology: Handbook [in Russian], Intermet Inzhiniring. Moscow (2007).
Yu. M. Bazhenov, Concrete Technology [in Russian], Vyshchaya Shkola, Moscow (1986).
I. V. Gladkykh, “Effect of refractory filler grain size composition made from technogenic raw material on heat-resistant concrete properties,” Proc. Nizhegorod R. E. Alekseev State Tech. Inst., R. E. Alekseev NGTU, No. 4 (111), 159 – 164 (2015).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Novye Ogneupory, No.1, pp. 22 – 25, January, 2022.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Gladkikh, I.V. Heat-Resistant Concrete Based on Technogenic Raw Material for Assembling the Shoulders of Aluminum Electrolyzers. Refract Ind Ceram 63, 24–27 (2022). https://doi.org/10.1007/s11148-022-00673-1
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11148-022-00673-1