The results of a study of the effect of temperature on the thermophysical characteristics of cermet coatings formed by carbo-vibro-arc hardening (CVAH) are presented. It was found that with an increase in temperature from 25 to 970°C, the coefficient of thermal conductivity λ of the coatings varies in the range from 18.1 to 24.0 W/(m·K), the specific heat from the coatings varies in the range from 560 to 895 J/(kg·K), and the thermal diffusivity coefficient a practically does not change, its average value is 5.1 × 10–6 m2/sec. The results of the research can be used to simulate the formation of high-quality metal-ceramic coatings by the CVAH method.
Similar content being viewed by others
References
A. A. Golyshev, A. M. Orishich, and A. A. Filippov, “Formation of cermet coatings B4C–Ti–6Al–4V by the SLM method,” Metallovedenie i Termicheskaya Obrabotka Metallov, 785(11), 39 – 43 (2020).
V. M. Fomin, A. A. Golyshev, V. F. Kosarev, et al., “Creation of cermet structures based on Ti, Ni, WC and B4C using the technology of laser surfacing and cold gas-dynamic spraying,” Fizicheskaya Mezomekhanika, 22(4), 5 – 15 (2019).
A. M. Stolin, P. M. Bazhin, M. V. Mikheyev, et al., “Deposition of protective coatings by electric arc cladding with SHS electrodes,” Welding International, 29(8), 657 – 660 (2015).
L. B. Leont’ev, N. P. Shapkin, A. L. Leont’ev, et al., “Management of the formation of composite wear-resistant cermet coatings on friction surfaces of parts,” Fundamental’nye Issledovaniya, No. 11-3, 630 – 635 (2012).
A. S. Dorokhov, V. F. Aulov, V. P. Lyalakin, et al., “Increase of wear resistance of coatings obtained by HFC-borating with modification of Fe-Al and Ni-Al systems with intermetallic compounds,” Tekhnologiya Mashinostroeniya, No. 2, 23 – 33 (2020).
N. A. Rudenskaya, G. P. Shveikin, and V. A. Guletskiy, “Effects of hardening of cermet coatings in the process of their formation,” Dolk. Akad. Nauk, 433(6), 776 – 779 (2010).
N. K. Gal’chenko, V. P. Samartsev, S. I. Belyuk, et al., “Features of the formation of the structure and properties of cermet coatings obtained by nitride-plasma technology,” Problemy Chernoi Metallurgii i Materialovedeniya, No. 1, 60 – 64 (2010).
G. A. Sukhochev, O. N. Kirillov, D. M. Nebol’sin, et al., “Technological assurance of the quality of application of protective coatings by combined treatment,” Uprochnyayushchie Tekhnologii i Pokrytiya, 68(8), 39 – 44 (2010).
A. V. Kolomeychenko, N. V. Titov, V. V. Vinogradov, et al., “The microstructure of composite cermet coatings produced by carbo-vibro-arc surfacing,” Welding International, 31(9), 739 – 742 (2017). https://doi.org/10.1080/09507116.2017.1318494.
S. N. Sharifullin, N. R. Adigamov, N. N. Adigamov, et al., “Surface hardening of cutting elements agricultural machinery vibro arc plasma,” J. Phys. Conf. Ser., 669(1), Article No. 012049 (2016).
V. Yu. Shchitsyn, E. S. E. Castell, and A. A. Volkov, “Technology of vibration-arc hardening with the use of ferro-additives as applied to the conditions of the Republic of Cuba,” Vestnik FGOU VPO Moscow State Agroengineering University named after V. P Goryachkin, No. 5, 35 – 39 (2018).
S. N. Sharifullin, N. R. Adigamov, E. Yu. Kudryashova, et al., “Tribological studies of surfaces of parts made of 65G steel, hardened by plasma methods,” Technicheskii Servis Mashin, 136(3), 120 – 127 (2019).
N. V. Titov, A. V. Kolomeichenko, V. N. Logachev, et al., “Investigation of the hardness and wear resistance of working sections of machines hardened by vibro-arc surfacing using cermet materials,” Welding International, 29(9), 737 – 739 (2015).
N. V. Titov, A. V. Kolomeichenko, P. M. Bazhin, et al., “Features of the structure of composite metal-ceramic coatings formed using multicomponent iron-based pastes,” Komposity i Nanostruktury, 11(2), 64 – 68 (2019).
A. V. Kolomeichenko, I. N. Kravchenko, M. N. Erofeev, et al., “Increase of wear resistance of cermet coatings applied by the method of carbovibro-arc hardening,” Problemy Mashinostroeniya i Avtomatizatsii, No. 4, 69 – 74 (2019).
V. I. Baikov, N. V. Pavlyukevich, A. K. Fedotov, et al., Thermophysics. Thermodynamics, Statistical Physics, Physical Kinetics [in Russian], Vol. 1, ed. O. G. Penyaz’kova, A. V. Lykov Institute of Heat and Mass Transfer of the National Academy of Sciences of Belarus, Minsk (2013) 400 p.
S. V. Ponomarev, S. V. Mishchenko, and A. G. Divin, Theoretical and Practical Aspects of Thermophysical Measurements [in Russian], a monograph in 2 tomes, Book 1, Publishing house of the Tambov State Technical University, Tambov (2006) 204 p.
A. A. Vakulin, Thermophysics and Theoretical Heat Engineering [in Russian], textbook, Publishing House of the Tyumen State University, Tyumen (2019) 196 p.
N. V. Titov, A. V. Kolomeichenko, V. L. Basinyuk, et al., “Thermophysical characteristics of multicomponent pastes for the application of hardening coatings,” Klei. Germetiki. Tekhnologii, No. 12, 2 – 7 (2020). https://doi.org/10.31044/1813-7008-2020-0-12-2-7.
G. I. Ivchenko and Yu. I. Medvedev, Mathematical Statistics [in Russian], textbook, Book House “LIBROKOM”, Moscow (2014) 352 p.
V. B. Goryainov, I. V. Pavlov, G. M. Tsvetkova, et al., Mathematical Statistics [in Russian], Publishing House of N. E. Bauman MSTU, Moscow (2001) 424 p.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Novye Ogneupory, No. 4, pp. 38 – 41, April 2021.
Rights and permissions
About this article
Cite this article
Titov, N.V., Kolomeichenko, A.V., Soloviev, R.Y. et al. Determination of Thermophysical Characteristics of Reinforcing Cermet Coatings. Refract Ind Ceram 62, 212–215 (2021). https://doi.org/10.1007/s11148-021-00585-6
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11148-021-00585-6