The structural characteristics of the thermal unit for the production of molded heat insulation materials and their technological parameters must fully comply with the properties of the initial materials and are determined using the production program of the enterprise. Based on the characteristics of gas dynamics formation, the structural parameters of the thermal chamber are determined, namely, dimensions, shape of the internal surface, presence of longitudinal and transverse seals, and extent and parameters of heat treatment. This article proposes a thermal calculation method, including separate consideration of conditions of mineral wool carpet heating in the thermal chamber and the formation of coolant flow in a furnace.
Similar content being viewed by others
References
Yu. L. Spirin, L. M. Butt, V. Vasiliauskas, J. Vaitus, et al., Handbook for the Production of Thermal Insulation Materials [in Russian], ed. Yu. L. Spirin, Stroyizdat, Moscow (1945).
I. P. Novitskis, A. Yu. Skrinskaya, “Research in the formation of mineral wool carpet,” proceedings Technology of Production of Heat-Insulating, Acoustic and Other Effective Building Materials, Vilnius: VNII-Teploizolyatsiya, No. 9, 83 – 90 (1976).
A. S. Telegin, V. S. Shvydkiy, and Yu. G. Yaroshenko, Heat and Mass Transfer: college textbook, ed. Yu. G. Yaroshenko; second edition, updated and revised, Akademkniga, Moscow (2002).
Yu. P. Gorlov, A. P. Merkin, and A. A. Usenko, Thermal Insulation Technology [in Russian], college textbook, Stroyizdat, Moscow (1980).
G. Yu. Vaitsiunas, K. Ya. Paulenis, and A. T. Shak, “Energy expenditures during heat treatment of mineral wool products,” proceedings Technology of Production of Heat-Insulating, Acoustic and Other Effective Building Materials, Vilnius: VNII-Teploizolyatsiya, 3 – 19 (1987).
K. Ya. Paulenis, A. Yu. Skrinska, Yu. S. Eydukevichus, et al., “Research of heat treatment chambers in the production of mineral wool products,” proceedings Technology of Production of Heat-Insulating, Acoustic and Other Effective Building Materials, Vilnius: VNII-Teploizolyatsiya, No. 9, 91 – 102 (1976).
A. V. Matyukhina, I. D. Kashcheev, and V. I. Matyukhin, “Choice and substantiation of furnace construction for heat treatment of moulded fiber objects,” Refract. Ind. Ceram, 50(3), Article No. 208.
V. I. Matyukhin, I. S. Bersenev, and A. V. Matyukhina, “Reduction of material and heat losses in the production of mineral melt,” Nov. Ogneup., No. 3, 12 – 14 (2007).
V. I. Matyukhin, I. D. Kashcheev, A. V. Matyukhina, and E. G. Kokh, “Aspects of the thermal operation of a multichamber furnace for polymerization of mineral wool products,” Izv. Vyssh. Ucheb. Zav. Chern. Metallurg., No. 2, 40 – 44 (2010).
Yu. G. Yaroshenko, V. S. Shvydkiy, N. A. Spirin, et al., Thermophysical Fundamentals of Thermal Operation of Metallurgical Furnaces and Aggregates [in Russian], AMK Den’RA, Yekaterinburg (2019).
V. P. Zhilkin, D. N. Doronin, Sinter Production. Technology, Equipment, Automation [in Russian], ed. G. A. Shalaev, Ural’skiy tsentr PR i reklamy, Yekaterinburg (2004).
V. I. Matyukhin, A. V. Matyukhina, I. D. Kashcheev, and E. V. Trapeznikova, “Investigation of the aspects of layer drying of mineral wool products,” Izv. Vyssh. Ucheb. Zav. Chern. Metallurg., No. 4, 50 – 53 (2010).
G. D. Kharlampovich, Yu. V. Churkin, Fenoly [in Russian], Khimiya, Moscow (1974).
V. I. Matyukhin, I. D. Kashcheev, and A. V. Matyukhina, “Substantiation of changes in the design of the thermal chamber of the curing furnace for heat treatment of molded fibrous products,” Izv. Vyssh. Ucheb. Zav. Chern. Metallurg., No. 2, 42 – 46 (2011).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Novye Ogneupory, No. 4, pp. 15 – 19, April, 2021.
Rights and permissions
About this article
Cite this article
Matyukhina, A.V., Matyukhin, V.I. & Yashmanova, N.V. Bases for Rational Design of a Mineral Wool Product Curing Furnace on a Conveyor Horizontal Dryer. Refract Ind Ceram 62, 140–144 (2021). https://doi.org/10.1007/s11148-021-00573-w
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11148-021-00573-w