On the basis of the main concepts of computer engineering, we study the stressed state of the surface layer of ground Si3N4–TiC ceramics subjected to the action of force loads. The formation of microstructural stress concentrators at the point of application of concentrated forces is discovered. These concentrators lead to changes in the structure of the ceramics due to the formation of discontinuities.
Similar content being viewed by others
References
S. N. Grigoriev and V. V. Kuzin, “Prospects for tools with ceramic cutting plates in modern metal working,” Glass Ceram., 68(7 – 8), 253 – 257 (2011).
R. Torrecillas, A. E. Seleznev, V. D. Gurin, et al., “Specifics of wear of ceramic cutting tool inserts featuring Al2O3–TiC dies when face milling hardened cast iron,” Mater. Sci. Forum, 876, 43 – 49 (2016).
V. V. Kuzin, S. N. Grigor’ev, D. R. Burton, et al., “A new generation of ceramic tools,” in: T. Baines, B. Clegg, and D. Harrison (eds.), Proc. of the 10th Internat. Conf. on Manufacturing Research ICMR-2012 (September 11 – 13, 2012, Birmingham) (2012), pp. 523 – 528.
J. Zhao, X. Yuan, and Y. Zhou, “Cutting performance and failure mechanisms of an Al2O3/WC/TiC micro-nano-composite ceramic tool,” Int. J. Refract. Met. Hard Mater., 28(3), 330 – 337 (2010).
V. V. Kuzin, M. A. Volosova, and M. Yu. Fedorov, “Wear of tools from nitride ceramics when machining nickel-based alloys,” J. Frict. Wear, 34(3), 199 – 203 (2013).
Z. Yin, J. Yuan, C. Huang, et al., “Friction and wear behaviors of Al2O3/TiC micro-nano-composite ceramic sliding against metals and hard materials,” Ceram. Int., 42(1), 1982 – 1989 (2016).
M. A. Volosova and V. V. Kuzin, “Regular features of wear of cutting plates from oxide and nitride ceramics,” Met. Sci. Heat Treat., 54(1 – 2), 41 – 46 (2012).
V. V. Kuzin, S. Y. Fedorov, V. L. Reutov, et al., “Service-induced damages of the ceramic thrust bearing pivot in the seal section of electrical centrifugal pump system,” Refract. Ind. Ceram., 59(5), 564 – 568 (2019).
S. Song, B. Lu, L. Wang, et al., “Performance optimization of complicated structural SiC/Si composite ceramics prepared by elective laser sintering,” Ceram. Int., 46(1), 568 – 575 (2020).
V. V. Kuzin, S. N. Grigoriev, and M. A. Volosova, “The role of the thermal factor in the wear mechanism of ceramic tools. Part 1. Macrolevel,” J. Frict. Wear, 35(6), 505 – 510 (2014).
V. V. Kuzin, S. N. Grigoriev, and M. Yu. Fedorov, “Role of the thermal factor in the wear mechanism of ceramic tools. Part 2. Microlevel,” J. Frict. Wear, 36(1), 40 – 44 (2015).
V. V. Kuzin, S. N. Grigor’ev, and M. A. Volosova, “Change in ceramic object surface layer structure during operation. Part 1,” Refract. Ind. Ceram., 61(1), 94 – 99 (2020).
V. V. Kuzin, S. N. Grigor’ev, and M. A. Volosova, “Change in ceramic object surface layer structure during operation. Part 2,” Refract. Ind. Ceram., 61(2), 178 – 182 (2020).
S. N. Grigor’ev, V. V. Kuzin, A. D. Batako, et al., “Influence of loads on the stress-strain state of aluminum-oxide ceramic cutting plates,” Russ. Eng. Res., 32(1), 61 – 67 (2012).
V. Kuzin, S. Grigoriev, M. Volosova, et al., “Designing of details taking into account degradation of structural ceramics at exploitation,” Appl. Mech. Mater., 752 – 753, 268 – 271 (2015).
V. V. Kuzin, S. N. Grigor’ev, D. R. Burton, et al., “A new generation of ceramic tools,” in: T. Baines, B. Clegg, and D. Harrison (eds.), Proc. of the 10th Internat. Conf. on Manufacturing Research ICMR2012 (September 11 – 13, 2012, Birmingham) (2012), pp. 523 – 528.
V. V. Kuzin, S. N. Grigor’ev, and M. A. Volosova, “Basic framework for computer-aided engineering of polished ceramic surface layers,” Refract. Ind. Ceram., 61(3), 349 – 354 (2020).
V. V. Kuzin, S. N. Grigor’ev, and M. A. Volosova, “Computer engineering of the surface layer of ground Al2O3–TiC ceramics. Force analysis,” Refract. Ind. Ceram., 61(4), 413 – 417 (2020).
V. V. Kuzin, S. N. Grigor’ev, and M. A. Volosova, “Computer engineering of the surface layer of ground Al2O3–TiC ceramics. Thermal analysis,” Refract. Ind. Ceram., 61(4), 418 – 423 (2020).
V. V. Kuzin, S. N. Grigoriev, and M. A. Volosova, “Computer simulation of the stressed state of the surface layer of ground Al2O3–TiC ceramics. Combined analysis,” Novye Ogneupory, No. 9, 67 – 72 (2020).
V. V. Kuzin S. N. Grigoriev, and M. A. Volosova, “Computer simulation of the stressed state of the surface layer of ground Al2O3–TiC ceramics. Systems analysis,” Novye Ogneupory, No. 10, 65 – 71 (2020).
V. Kuzin and S. Grigoriev, “Method for the investigation of the stress-strain state of surface layer of machine elements from a sintered nonuniform material,” Appl. Mech. Mater., 486, 32 – 35 (2014).
The present work is financially supported within the framework of the State Task of the Ministry of Science and Higher Education of Russian Federation; Project No. 0707-2020-0025.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Novye Ogneupory, No. 12, pp. 54 – 60, December, 2020.
Rights and permissions
About this article
Cite this article
Kuzin, V.V., Grigor’ev, S.N. & Volosova, M.A. Force Analysis of the Stress-Strain State of the Surface Layer of Ground Si3N4–TiC Ceramics. Refract Ind Ceram 61, 720–726 (2021). https://doi.org/10.1007/s11148-021-00549-w
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11148-021-00549-w