Results are given for synthesis of AlN–Al2O3–Y2O3 composites in a combustion regime in an industrial reactor. The effect of synthesis temperature on formation of the microstructure, phase composition, and impurity oxygen content dissolved in the crystal lattice of aluminum nitride is studied. The optimum synthesis temperature is determined. Experimental batches of composite powders are produced for the manufacture of dielectric ceramics with high thermal conductivity.
Similar content being viewed by others
References
L. M. Sheppard, “Aluminum nitride: a versatile but challenging material,” Ceram. Bull., 69(11), 1801 – 1812 (1990).
K. Knudsen, “Aluminum nitride,” Am. Ceram. Soc. Bull., 74(6), 97 – 101 (1995).
A. Bellosi, L. Esposito, E. Scafe, and L. Fabri, “The influence of microstructure on the thermal conductivity of aluminum nitride,” J. Mater. Sci., 29, 5014 – 5022 (1994).
G. A. Slack, R. A. Tanzilli, R. O. Pohl, and J. W. Vandersande, “The intrinsic thermal conductivity of AlN,” J. Phys. Chem. Solids., 48(7), 641 – 647 (1987).
P. S. Baranda, A. K. Knudsen, and E. Rah, “Effect of silica on the thermal conductivity of aluminum nitride,” J. Am. Ceram. Soc., 76(7), 1761 – 1771 (1993).
Kaori Sakuma, Akira Okada, and Hiroshi Kawamoto, “Effect of cation impurities on thermal conductivity of yttria-doped aluminum nitride,” J. Mater. Synth. Process, 6(5), 315 – 321 (1998).
R. Kobayashi, Y. Moriya, M. Imamura, et al., “Relation between oxygen concentration in AlN lattice and thermal conductivity of AlN ceramics sintered with various sintering additives,” J. Ceram. Soc. Jpn., 119(4), 291 – 294 (2011).
Koji Watari, Mitsuru Kawamoto, and Kozo Ishizaki, “Sintering chemical reactions to increase thermal conductivity of aluminum nitride,” J. Mater. Sci., 26(17), 4727 – 4732 (1991.
A. F. Junior and D. J. Shanafield, “Thermal conductivity of polycrystalline nitride (AlN) ceramics,” Ceramica, 50(9), 247 – 253 (2004).
L.Wang, S. Roy,W. Sigmund, and F. Aldinger, “In situ incorporation of sintering additives in Si3N4 powder by a combustion process,” J. Eur. Ceram. Soc., 19(1), 61 – 65 (1999).
V. V. Zakorzhevski, S. Yu. Sharivker, and I. P. Borovinskaya, “Specific features of self-propagating high-temperature synthesis of the AlN–Y2O3 system and some properties of the final products,” Int. J. SHS, 8(2), 165 – 176 (1999).
R. Pampuch, J. Lis, L. Stoberski, and E. Ermer “Improvement sinterability and microstructure of covalent ceramics by solid combustion synthesis,” Int. J. SHS, 2(3), 49 – 55 (1993).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Novye Ogneupory, No. 9, pp. 32 – 36, September, 2020.
Rights and permissions
About this article
Cite this article
Zakorzhevskii, V.V., Kovalev, I.D. & Mukhina, N.I. Features of Structure and Phase Formation during Synthesis of AIN–Al2O3–Y2O3 Composites in a Combustion Regime. Refract Ind Ceram 61, 513–517 (2021). https://doi.org/10.1007/s11148-021-00513-8
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11148-021-00513-8