The results of research on obtaining a new composition of chemically resistant, refractory concrete mixture are presented. The basis of the resulting mass is production waste, which is a slag of electrothermal reduction of niobium pentoxide — crushed and purified fused alumina — electrocorundum, ferrosilicon slag, ferrochrome slag, refractory aluminosilicate mortar and refractory clay. High chemical resistance, fire resistance, mechanical strength, hardness and wear resistance determine the scope of its application—the production of chemically resistant, refractory concrete.
Similar content being viewed by others
References
A. S. Berkman and T. I. Melnikova, Structure and Frost Resistance of Wall Materials [in Russian], Gosstroy, Leningrad (1962) 136 p.
M. K. Gal’perina and L. V. Erokhina, “Kinetics of changes in the structure of porosity in the process of firing clays of various mineralogical composition” [in Russian], Trudy Instituta NIIstrojkeramiki, Issue 45, 3 – 18 (1981).
E. S. Abdrakhimova, Physico-Chemical Processes in the Synthesis of Acid-Resistant Materials Based on Technogenic Raw Materials [in Russian], dissertation, 02.00.04, Ust-Kamenogorsk (2006) 426 p.
Yu. M. Butt, et al., General Technology of Silicates [in Russian], Gosstrojizdat, Moscow (1976) 615 p.
GOST 13993–78. Chemically and heat-resistant ceramic products. Method for determining water permeability.
GOST 961–89. Acid-resistant and thermo-acid-resistant ceramic tiles. Technical conditions.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Novye Ogneupory, No. 10, pp. 9 – 11, October 2020.
Rights and permissions
About this article
Cite this article
Satbaev, B.N., Koketaev, A.I., Aimbetova, E.O. et al. Production of Chemically Resistant Refractory Concrete Mixes from Metallurgical Waste and Their Physical and Chemical Properties. Refract Ind Ceram 61, 484–486 (2021). https://doi.org/10.1007/s11148-021-00507-6
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11148-021-00507-6