We study the inhomogeneity of stresses on the boundaries of the main structural elements of Al2O3-ceramics under the conditions of unsteady thermoelasticity, which are of especial importance for the development of recommendations concerning the choice of ceramics for the end ceramic cutters.
Similar content being viewed by others
References
V. V. Kuzin, S. N. Grigor’ev, and M. A. Volosova, “Design of ceramic end cutters for innovative technological processes with regard for their stress-strain state. The choice of ceramics. Part 1,” Novye Ogneupory, No. 10, 68 – 73 (2018).
A. S. Vereshchaka, V. M. Provotorov, V. V. Kuzin, et al., “Investigation of the thermal state of cutting tools with the help of thermoindicating substances,” Vestn. Mashinostr., No. 1, 45 – 49 (1986).
V. V. Kuzin, S. N. Grigor’ev, and M. A. Volosova, “The role of the thermal factor in the wear mechanism of ceramic tools: Part 1. Macrolevel,” J. Frict. Wear, 35(6), 505 – 510 (2014).
V. V. Kuzin, S. N. Grigor’ev, and M. Yu. Fedorov, “Role of the thermal factor in the wear mechanism of ceramic tools. Part 2: Microlevel,” J. Frict. Wear, 36(1), 40 – 44 (2015).
V. V. Kuzin, Tools with Ceramic Cutting Plates [in Russian], Yanus-K, Moscow (2006).
S. N. Grigor’ev, V. I. Myachenkov, and V. V. Kuzin, “Automated thermal-strength calculations of ceramic cutting plates,” Russ. Eng. Research, 31(11), 1060 – 1066 (2011).
V. Kuzin and S. Grigor’ev, “Method of investigation of the stress-strain state of surface layer of machine elements from a sintered nonuniform material,” Appl. Mech. Mater., 486, 32 – 35 (2014).
S. N. Grigor’ev, V. V. Kuzin, A. D. Batako, et al., “Influence of thermal loads on the stress-strain state of aluminum-oxide ceramic cutting plates,” Russ. Eng. Research, 32(5), 473 – 477 (2012).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Novye Ogneupory, No. 4, pp. 65 – 69, April, 2019.
Rights and permissions
About this article
Cite this article
Kuzin, V.V., Grigor’ev, S.N. Design of Ceramic End Cutters for Innovative Technological Processes Performed with Regard for Their Stress-Strain State. The Choice of Ceramics. Part 2. Refract Ind Ceram 60, 227–231 (2019). https://doi.org/10.1007/s11148-019-00341-x
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11148-019-00341-x