Refractories and Industrial Ceramics

, Volume 58, Issue 3, pp 319–323 | Cite as

Features of Al2O3–TiC-Ceramic Specimen Edge Morphology Formation During Diamond Grinding

  • V. V. Kuzin
  • S. Yu. Fedorov
  • S. N. Grigor’ev
Article
  • 14 Downloads

On the basis of studying features of Al2O3–TiC-ceramic specimen edge morphology formation with flat diamond grinding the main forms and geometric parameters of chipping. A correlation is revealed for chipping parameters with grinding depth, and longitudinal and transverse feeds. An explanation is proposed for the significant effect of grinding regime and specimen edge orientation with respect to longitudinal and transverse feeds of the mill table on edge morphology.

Keywords

Al2O3–TiC-ceramic diamond grinding edge morphology ground surface (GS) side surface (SS) 

Notes

The present work is supported by the Russian Federation Ministry of Education and Science within the scope of a state assignment for MGTU STANKIN in the sphere of scientific activity (project registration number 9.1372.2017).

References

  1. 1.
    A. V. Lose, O. A. Loseva, and Yu. S. Dmitrevskaya, “Requirement for using finishing tecjhnology in engineering,” Metalloobrabotka, No. 1 (49), 209 (2010).Google Scholar
  2. 2.
    Li Kun and T. Warren Liao, “Surface/subsurface damage and the fracture strength of ground ceramics,” J. Mater. Proc. Tech., 57, 207 – 220 (1996).CrossRefGoogle Scholar
  3. 3.
    V. V. Kuzin, “Technology for machining high-refractory ceramic parts based on silicon nitride,” Refract. Indust. Ceram., 47(4), 204 – 208 (2006).CrossRefGoogle Scholar
  4. 4.
    T. El-Wardany, R. Barth, J. Holowczak, et al., “Optimum process parameters to produce green ceramic complex parts,” CIRP Annals — Manufacturing Technology, 58, 109 – 112 (2009).CrossRefGoogle Scholar
  5. 5.
    V. Kuzin, “A model of forming the surface layer of ceramic parts based on silicon nitride in the grinding Process,” Key Eng. Mat. Precision Machining, 496, 127 – 131 (2012).CrossRefGoogle Scholar
  6. 6.
    Xiaohu Liang, Bin Lin, Xuesong Han, and Shangong Chen, “Fractal analysis of engineering ceramics ground surface,” Appl. Surf. Sci., 258, 6406 – 6415 (2012).CrossRefGoogle Scholar
  7. 7.
    V. V. Kuzin, “Increasing the operational stability of nitride-ceramic cutters by optimizing their grinding Conditions,” Russian Engin. Res., 23(12), 32 – 36 (2003).Google Scholar
  8. 8.
    I. L. Shkarupa and D. A. Klimov, “Machining of ceramic materials based on aluminum oxide, and silicon nitride and carbide,” Steklo. Keram., No. 6, 16 – 18 (2004).Google Scholar
  9. 9.
    V. V. Kuzin, “Technological aspects of diamond grinding of the nitride ceramics,” Russian Engin. Res., 24(1), 23 – 28 (2004).Google Scholar
  10. 10.
    V. A. Rogov and M. I. Shkarupa, “Comparative analysis of machining of ultrahard ceramic materials by grinding,” Tekhnol. Mashinostroeniya, No. 5(83), 12 – 116 (2009).Google Scholar
  11. 11.
    M. A. Volosova, “Study of the effect of combined surface treatment on physicomechanical properties of oxide and nitride cutting tool ceramic, “Al2O3–TiC ceramic specimens,” MGTU STANKIN, No. 2, 39 – 43 (2013).Google Scholar
  12. 12.
    M. Emami, M. H. Sadeghi, and Ahmed A. D. Sarhan, “Investigating the effects of liquid atomization and delivery parameters of minimum quantity lubrication on the grinding process of Al2O3 engineering ceramics,” J. Manufacturing Processes 15, 374 – 388 (2013).CrossRefGoogle Scholar
  13. 13.
    J. Wang, P. Feng, J. Zhang, et al., “Modeling the dependency of edge chipping size on the material properties and cutting force for rotary ultrasonic drilling of brittle materials,” Internat. J. Machine Tools and Manufacture, 101, 18 – 27 (2016).CrossRefGoogle Scholar
  14. 14.
    V. V. Kuzin, S. N. Grigor’ev, M. Yu. Fedorov, S. Yu. Fedorov, “Performance of channel cutters with ceramic plates in machining quenched steel,” Russian Engineering Research, 33(1), 24 – 28 (2013).CrossRefGoogle Scholar
  15. 15.
    C. E. H. Ventura, J. Köhler, and B. Denkena, “Strategies for grinding of chamfers in cutting inserts,” Precision Engineering, 38, 749 – 758 (2014).CrossRefGoogle Scholar
  16. 16.
    V. V. Kuzin, S. I. Dos’ko, V. F. Popov, et al., “Tooling for high-speed cutting,” Russian Engineering Research, 25(9), 20 – 25 (2005).Google Scholar
  17. 17.
    V. V. Kuzin, “Effective use of high density ceramic for manufacture of cutting and working tools,” Refract. Indust. Ceram., 51(6), 421 – 426 (2010).CrossRefGoogle Scholar
  18. 18.
    V. V. Kuzin and S. Yu. Fedorov, “Correlation of diamond grinding regimes with Al2O3–TiC-ceramic surface condition,” Refract. Indust. Ceram., 57(5), 520 – 525 (2017).CrossRefGoogle Scholar
  19. 19.
    V. V. Kuzin, S. N. Grigor’ev, and V. N. Ermolin, “Stress inhomogeneity in a ceramic surface layer under action of an external load. Part 1. Effect of complex mechanical loading,” Refract. Indust. Ceram., 54(5), 416 – 419 (2014).CrossRefGoogle Scholar
  20. 20.
    V. V. Kuzin, S. N. Grigor’ev, and V. N. Ermolin, “Stress inhomogeneity in a ceramic surface layer under action of an external load. Part 2. Effect of thermal loading,” Refract. Indust. Ceram., 54(6), 497 – 501 (2014).CrossRefGoogle Scholar
  21. 21.
    V. V. Kuzin, M. R. Portnoi, and S. Yu. Fedorov, “Stress inhomogeneity in oxide-carbide ceramic surface with developed relief under action of heat flow,” Refract. Indust. Ceram., 56(5), 557 – 560 (2016).CrossRefGoogle Scholar
  22. 22.
    V. Kuzin, S. Grigoriev, and M. Portnoy, “Effect of thermal loading on stresses in defective surface layer of ceramics,” Appl. Mechan. Mater., 827, 189 – 192 2016.CrossRefGoogle Scholar
  23. 23.
    V. V. Kuzin, S. N. Grigor’ev, and V. N. Ermolin, “Stress inhomogeneity in a ceramic surface layer under action of an external load. Part 4. Combined effect of force and thermal loads,” Refract. Indust. Ceram., 55(1), 40 – 444 (2014).CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media, LLC 2017

Authors and Affiliations

  • V. V. Kuzin
    • 1
  • S. Yu. Fedorov
    • 1
  • S. N. Grigor’ev
    • 1
  1. 1.FGBOU VO Moscow State Technological University StankinMoscowRussia

Personalised recommendations