Powders are obtained containing metal particles during chemical dispersion of Al–Mg (20 wt.%)-alloy. A method of high-temperature self-propagating synthesis is used in order to prepare cermet. Reaction sintering in a filtering combustion regime for a powder workpiece is implemented by heating in air at 550 – 600°C followed by initiation of metal exothermic reaction combustion.
Similar content being viewed by others
References
A. Zeerleder, “Über Sintern von Aluminiumlågierungen,” Z. Metallkunde, 41(8), 228 – 233 (1950).
A. Yu. Omarov, F. Z. Badaev, and Yu. G. Trifonov, “Production scheme for sintering nanodispersed powders prepared by chemical dispersion,” Novye Ogneupory, No. 10, 32 – 35 (2012).
E. S. Lukin and N. T. Andrianov, Ceramic Production Technical Analysis and Monitoring [in Russian], Stroiizdat, Moscow (1986).
E. A. Levashov, A. S. Rogachev, V. I. Yukhvid, et al., Physicochemical and Production Bases of Self-Propagating High-Temperature Synthesis [in Russian], BINOM, Moscow (1999).
The work was carried out with financial support of the Russian Ministry of Education and Science within the framework of research work “Technology, structure, and properties of new aluminum oxide ceramics from chemical dispersion of aluminum alloys with zirconium, vanadium, and molybdenum” according state assignment No. 11.425.2014/K on equipment of the Collective Use Center “High-tech in engineering.”
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Novye Ogneupory, No. 6, pp. 62 – 65, June 2015.
Rights and permissions
About this article
Cite this article
Vasin, A.A., Tarasovskii, V.P., Omarov, A.Y. et al. Study of Cermet Synthesis from Powders Prepared by Chemical Dispersion of Al–Mg (20 wt.%)-Alloy. Refract Ind Ceram 56, 310–313 (2015). https://doi.org/10.1007/s11148-015-9836-y
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11148-015-9836-y