Skip to main content
Log in

Evaluation of the possible use of carbon nanofiller for manufacturing silicided objects

  • Published:
Refractories and Industrial Ceramics Aims and scope

Silicided graphites, prepared by SGP technology, using a graphite nanofiller fraction of less than 100 μm, are promising materials no worse in properties than leading analogs of overseas firms. Nonetheless, in view of the available raw material base for carbon materials rapid evaluation methods are required for the quality of graphites used in the manufacture of silicided objects based on them. Volumetric reaction makes it possible to establish quite rapidly the suitability of test carbon material for manufacturing silicided objects based on them without recourse to compaction, firing, machining, and siliciding shaped objects. X-ray structural data for the degree of graphitization of carbon material γ, and also a change in its structural characteristics (La and Lc) during reaction with silicon may be additional criteria for the choice of graphite filler.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  1. Official site of CoorsTek, USA (2005) — Access regime: http://www.coorstek.com/resources/8510-1024SiCMfg.pdf.

  2. Official site of OAO NIIgrafit, Moscow (1997) — Access regime: http://advtech.ru/niigrafit/prod.graf.htm.

  3. A. S. Tarabanov, and V. I. Kostikov, Silicided Graphite [in Russian], Metallurgiya, Moscow (1977).

    Google Scholar 

  4. A. N. Seleznev, Carbon Raw Material for the Electrode Industry [in Russian], Profizdat, Moscow (2000).

    Google Scholar 

  5. Yu. N. Koshelev, I. A. Bubnenkov, O. Yu. Sorokin, et al., “Effect of some carbon charge characteristics on silicided graphite composition,” Tsvet. Met., No. 12, 61 – 63 (2007).

    Google Scholar 

  6. V. I. Kostikov, L. N. Smirnov, and O. S. Skibnevskaya, RF Patent 2370435, Carbon-containing composite for preparing silicided objects, Claimant and patent holder V. I. Kostikov, Claim 11.07.2007, Publ. 10.20.2009, Byul. No. 29.

  7. Sh. Sh. Yagafarov, V. A. Chumentsev, E. A. Belenkov, et al., “Effect of carbon base macrostructure on C–SiC composite material formation,” Vestn. Chelyab. Univ., Ser. B, Fizika, No. 1, 131 – 135 (1998).

  8. E. S. Shmakova, Yu. N. Lebedev, Yu. I. Mikhin, et al., “Phase and structural transformations in carbon materials containing silicon,” in: Structural Materials Based on Carbon [in Russian], Metallurgiya, Moscow (1976).

Download references

Author information

Authors and Affiliations

Authors

Additional information

Translated from Novye Ogneupory, No. 12, pp. 32 – 37, December 2011.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Bubnenkov, I.A., Koshelev, Y.I., Sorokin, O.Y. et al. Evaluation of the possible use of carbon nanofiller for manufacturing silicided objects. Refract Ind Ceram 52, 431–435 (2012). https://doi.org/10.1007/s11148-012-9444-z

Download citation

  • Received:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11148-012-9444-z

Keywords

Navigation