Abstract
Methodological problems connected with the study of grain size distribution of polyfraction suspensions bearing nanoparticles are considered. Some technological problems of the use of nanoparticles are analyzed. Examples of effective use of nanodisperse kinds of silica for fabricating various silicate materials are presented.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Yu. E. Pivinskii, “A study of vibration molding of ceramic concretes. Molding systems and main regular features of the process,” Ogneupory, No. 6, 8–14 (1993).
Yu. E. Pivinskii and A. G. Romashin, Quartz Ceramics [in Russian], Metallurgiya, Moscow (1974).
Yu. E. Pivinskii, Theoretical Aspects of the Technology of Ceramics and Refractories, Selected Works, Vol. 1 [in Russian], Stroyizdat, Moscow (2003).
N. N. Tsuryupa, A Practicum on Colloid Chemistry [in Russian], Vysshaya Shkola, Moscow (1963).
P. G. Komokhov, “Sol-gel as a concept of the nanotechnology of cement composite,” Stroit. Mater., No. 8, 14–15 (2006).
Yu. E. Pivinskii and A. D. Dobrodon, “Fabrication and properties of binders for high-alumna suspensions in the ‘bauxite-quartz glass’ system,” Novye Ogneupory, No. 5, 19–26 (2002).
Th. Ebbrecht, B. Weyershausen, T. R. Lipinski, et al., “A novel high performance binder for refractories,” Proc. of UNITECR 07, Dresden, 2007, pp. 388–390.
Author information
Authors and Affiliations
Additional information
__________
Translated from Novye Ogneupory, No. 12, pp. 28–38, December, 2007.
Rights and permissions
This article is published under an open access license. Please check the 'Copyright Information' section either on this page or in the PDF for details of this license and what re-use is permitted. If your intended use exceeds what is permitted by the license or if you are unable to locate the licence and re-use information, please contact the Rights and Permissions team.
About this article
Cite this article
Pivinskii, Y.E. Nanodisperse silica and some aspects of nanotechnologies in the field of silicate materials science. Part 2. Refract Ind Ceram 48, 435–443 (2007). https://doi.org/10.1007/s11148-008-9009-3
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11148-008-9009-3