Abstract
Results are presented for experiments in studying SHS-rolling realized under conditions of rolling in a vacuum. The starting materials used are powder mixtures of the systems Ti-C, Ti-Al, Ti-C-N-Ni. Optimum heat treatment regimes and compaction of the starting mixtures are determined and parameters are studied for combustion and subsequent plastic deformation in a vacuum, test specimens are prepared in the form of strips of TiC and TiAl and a hard alloy based on TiC and TiN with porosity from 3 to 65%. The new method will make it possible to prepare articles made of synthetic hard materials in the form of strip, sheets, bars and other metallurgical products.
Similar content being viewed by others
Author information
Authors and Affiliations
Additional information
__________
Translated from Novye Ogneupory, No. 10, pp. 42–44, October 2007.
Self-propagating high-temperature synthesis.
Rights and permissions
About this article
Cite this article
Chernyshev, V.N. SHS-rolling in a vacuum — an effective method for preparing cermet and intermetallic materials. Refract Ind Ceram 48, 359–361 (2007). https://doi.org/10.1007/s11148-007-0095-4
Received:
Issue Date:
DOI: https://doi.org/10.1007/s11148-007-0095-4