Abstract
Accumulated experience shows that one can increase the resistance of converter linings in various ways, with the largest effect from the use of self-decomposing magnesium materials in the form of granules or briquettes. The advantage of these materials comes from the presence of hydrated or carbonate components producing explosive decomposition on entry into the converter slag, with the slag rapidly saturated in MgO, with an increase in viscosity and the formation of a stable lining.
Similar content being viewed by others
References
A. V. Mokrinskii, A. N. Lavrik, V. V. Sokolov, et al., “Ways of raising the resistance of converter lining,” Novye Ogneupory, No. 8, 17–18 (2004).
C. Sian, “Slag blowing in a 300 ton oxygen converter at the BAOSTEEL company and crystallographic structure of the slag,” News of Ferrous Metallurgy Abroad, No. 2, 48–49 (2001).
Yu. A. Dmitrienko, V. N. Koptelov, and I. G. Maryasev, “Experience with making and using modifiers for steel-melting slags,” Stal’, No. 1, 30–33 (2005).
V. K. Didkovskii and E. V. Tret’yakov, “Using magnesian slag-forming materials to improve the lining resistance in oxygen converters,” Chernaya Metallurgiya, Issue 4, 4–15 (1985).
K. N. Demidov, V. G. Ovsyannikov, and O. F. Shatilov, “Use of self-decomposing magnesian granules for depositing a coating on converter lining,” Stal’, No. 12, 37–38 (2004).
Author information
Authors and Affiliations
Additional information
__________
Translated from Novye Ogneupory, No. 4, pp. 3–5, March, 2007.
Rights and permissions
About this article
Cite this article
Kushnarev, A.V., Visloguzova, E.A., Ustenko, A.S. et al. Experience with MgO-bearing materials for raising the stability of converter linings. Refract Ind Ceram 48, 9–11 (2007). https://doi.org/10.1007/s11148-007-0016-6
Received:
Issue Date:
DOI: https://doi.org/10.1007/s11148-007-0016-6