Abstract
The local natural clay from Darbandikhan (DC) was evaluated as a possible adsorbent for the adsorption of Zn2+ in its natural state, after [acid activation (ADC), base activation (BDC), and after pillaring (TiPDC)] in the laboratory and Sulaimani city industrial zone sewage. X-ray Diffraction, X-ray Fluorescence (XRF), Fourier-Transform Infrared Spectroscopy, Thermal gravimetric analyses, and N2 physisorption analyses were used to study the effects of different clay treatments on the surface, and adsorptive properties of the clay. The modifications resulted mainly in the removal of the calcite content and a significant increase in the surface area from 24.38 to 30.65, 32.19, and 47.46 m2 g−1 for DC, ADC, BDC, and TiPDC respectively. The adsorbent materials were examined for their efficiency to remove Zn2+ contaminant from Sulaimani industrial zone sewage by a batch method. ADC and TiPDC presented more than 99.9% removal (from 308.0 to less than 0.01 μg/L) of Zn2+. The estimated kinetic parameters illustrate that there is a directly proportional between the adsorption capacity and temperature for Zn2 + ions adsorption by DC, ADC, BDC, and TiPDC. The thermodynamic study showed that the adsorption of Zn2+ was found to be spontaneous above 20 °C for adsorbent (∆G° = -ve), and endothermic (∆H° = + ve) with an increase in the randomness at the adsorbate-adsorbent contact layer (∆S° = + ve). The natural clay and the modified materials (ADC, BDC, and TiPDC) can be regarded as good adsorbents for removing Zn2+ from wastewater.
Graphical abstract
Similar content being viewed by others
Data availability
The authors confirm that the data supporting the findings of this study are available within the article.
References
Mnasri-Ghnimi S, Frini-Srasra N (2019) Removal of heavy metals from aqueous solutions by adsorption using single and mixed pillared clays. Appl Clay Sci 179:105151. https://doi.org/10.1016/j.clay.2019.105151
Hussain S, Khan M, Sheikh TMM et al (2022) Zinc essentiality, toxicity, and its bacterial bioremediation: a comprehensive insight. Front Microbiol. https://doi.org/10.3389/fmicb.2022.9007406
Kania H, Saternus M (2023) Evaluation and current state of primary and secondary zinc production—a review. Appl Sci. https://doi.org/10.3390/app13032003
Mishra V (2014) Biosorption of zinc ion: a deep comprehension. Appl Water Sci 4:311–332. https://doi.org/10.1007/s13201-013-0150-x
Abidli A, Huang Y, Ben Rejeb Z et al (2022) Sustainable and efficient technologies for removal and recovery of toxic and valuable metals from wastewater: recent progress, challenges, and future perspectives. Chemosphere 292:133102. https://doi.org/10.1016/j.chemosphere.2021.133102
Manohar DM, Noeline BF, Anirudhan TS (2006) Adsorption performance of Al-pillared bentonite clay for the removal of cobalt(II) from aqueous phase. Appl Clay Sci 31:194–206. https://doi.org/10.1016/j.clay.2005.08.008
Gu S, Kang X, Wang L et al (2019) Clay mineral adsorbents for heavy metal removal from wastewater: a review. Environ Chem Lett 17:629–654. https://doi.org/10.1007/s10311-018-0813-9
Uddin MK (2017) A review on the adsorption of heavy metals by clay minerals, with special focus on the past decade. Chem Eng J 308:438–462. https://doi.org/10.1016/j.cej.2016.09.029
Vercellone SZ, Sham E, Torres EMF (2015) Measure of zeta potential of titanium pillared clays. Procedia Mater Sci 8:599–607. https://doi.org/10.1016/j.mspro.2015.04.114
Ismadji S, Soetaredjo FE, Ayucitra A (2015) Introduction
Komadel P, Madejová J (2013) Acid activation of clay minerals, 2nd edn. Elsevier Ltd, Amsterdam
EL Miz M, Salhi S, Chraibi I et al (2013) Characterization and adsorption study of thymol on pillared bentonite. Open J Phys Chem 4:98–116. https://doi.org/10.4236/ojpc.2014.43013
Ding Z, Kloprogge JT, Frost RL et al (2001) Porous clays and pillared clays-based catalysts. Part 2: a review of the catalytic and molecular sieve applications. J Porous Mater 8:273–293. https://doi.org/10.1023/A:1013113030912
Kloprogge JT, Duong LV, Frost RL (2005) A review of the synthesis and characterisation of pillared clays and related porous materials for cracking of vegetable oils to produce biofuels. Environ Geol 47:967–981. https://doi.org/10.1007/s00254-005-1226-1
Booij E, Kloprogge JT, Rob van Veen JA (1996) Preparation, structural characteristics and catalytic properties of large-pore rare earth element (Ce, La)/Al-pillared smectites. Clays Clay Miner 44:774–782. https://doi.org/10.1346/CCMN.1996.0440608
Solé M, Casas JM, Lao C (2003) Removal of Zn from aqueous solutions by low-rank coal. Water Air Soil Pollut 144:57–65. https://doi.org/10.1023/A:1022965417124
Issabayeva G, Dih JCM (2019) Rubber industry wastewater treatment: adsorption of zinc. AIP Conf Proc 10(1063/1):5126547
Michael Ogunjobi K, Jayeola VA, Friday Gakenou O et al (2021) Biosorption potentials of sawdust in removing zinc ions from aqueous solution. Int J Sci Res Manag 9:191–198. https://doi.org/10.18535/ijsrm/v9i10.fe01
Badrealam S, Darrell VC, Dollah Z et al (2019) Adsorption of manganese and zinc in synthetic wastewater by tea waste (TW) as a low cost adsorbent. J Phys Conf Ser. https://doi.org/10.1088/1742-6596/1349/1/012061
Shamkhi HJ, Hussein TK (2022) Adsorption of lead, zinc, and nickel ions from wastewater using coriander seeds as an adsorbent. J Ecol Eng 23:158–168. https://doi.org/10.12911/22998993/143935
Dawagreh M, Abdal-Kareem (2017) Removal of zinc from wastewater by using Jordanian natural removal of zinc from wastewater by using Jordanian natural zeolite. Asian Jr Microb Biotech Env Sc 19:625–630
El-Shahat MF, Shehata AMA (2013) Adsorption of lead, cadmium and zinc ions from industrial wastewater by using raw clay and broken clay-brick waste. Asian J Chem 25:4284–4288. https://doi.org/10.14233/ajchem.2013.13940
Ding S, Shen J, Xu B et al (2011) The factors on removal of zinc cation from aqueous solution by bentonite. Nat Resour 02:107–113. https://doi.org/10.4236/nr.2011.22015
Chai W, Huang Y, Su S et al (2017) Adsorption behavior of zn(ii) onto natural minerals in wastewater. a comparative study of bentonite and kaolinite. Physicochem Probl Miner Process 53:264–278. https://doi.org/10.5277/ppmp170122
Vasconcelos PNM, Lima WS, Silva MLP et al (2013) Adsorption of zinc from aqueous solutions using modified Brazilian gray clay. Am J Anal Chem 2013:510–519
Hojati S, Landi A (2015) Removal of zinc from a metal plating wastewater using an Iranian sepiolite: determination of optimum conditions. Desalin Water Treat 53:2117–2124. https://doi.org/10.1080/19443994.2013.861771
Vengris T, Binkiene R, Sveikauskaite A (2001) Nickel, copper and zinc removal from waste water by a modified clay sorbent. Appl Clay Sci 18:183–190. https://doi.org/10.1016/S0169-1317(00)00036-3
Oubagaranadin JUK, Murthy ZVP, Mallapur VP (2010) Removal of Cu(II) and Zn(II) from industrial wastewater by acid-activated montmorillonite-illite type of clay. Comptes Rendus Chim 13:1359–1363. https://doi.org/10.1016/j.crci.2010.05.024
Abdallah S (2019) Remediation of Copper and Zinc from wastewater by modified clay in Asir region southwest of Saudi Arabia. Open Geosci 11:505–512. https://doi.org/10.1515/geo-2019-0041
Aziz BK, Abdullah MA, Jubrael KJ (2011) Acid activation and bleaching capacity of some clays for decolourizing used oils. Asian J Chem 23:2449–2455
Khalifa AZ, Cizer Ö, Pontikes Y et al (2020) Advances in alkali-activation of clay minerals. Cem Concr Res 132:106050. https://doi.org/10.1016/j.cemconres.2020.106050
Zhao B, Dang L, Zhang X et al (2012) Preparation of TiO2-pillared montmorillonite as photocatalyst and photocatalytic degradation of methyl orange. Appl Mech Mater 190–191:534–538. https://doi.org/10.4028/www.scientific.net/AMM.190-191.534
Thommes M, Cychosz KA, Neimark AV (2012) Advanced physical adsorption characterization of nanoporous carbons. Elsevier, Amsterdam
Ertier PIB, Chweinar KES, Tanjek HES, et al (2016) On the use and abuse of N2 Physisorption for the characterization of the pore structure of shales. 21:151–161
Meier Kahr GLP (1999) Determination of the cation exchange capacity (CEC) of clay minerals using the complexes of copper(II) ion with triethylenpentamine. Clays Clay Miner 47:386–388
Aziz BK, Salh DM, Kaufhold S, Bertier P (2019) The high efficiency of anionic dye removal using CE-AL13/pillared clay from Darbandikhan natural clay. Molecules 24:1–15. https://doi.org/10.3390/molecules24152720
Mishra G, Mukhopadhyay M (2019) TiO2 decorated functionalized halloysite nanotubes (TiO2 @HNTs) and photocatalytic PVC membranes synthesis, characterization and its application in water treatment. Sci Rep 9:1–17. https://doi.org/10.1038/s41598-019-40775-4
Kaufhold S, Dohrmann R, Klinkenberg M et al (2010) N 2 -BET specific surface area of bentonites. J Colloid Interface Sci 349:275–282. https://doi.org/10.1016/j.jcis.2010.05.018
Uslu H, Datta D, Bamu HS (2017) Zn 2 + Ion adsorption from aqueous solution using montmorillonite clay Impregnated with Tri - n - octylamine. J Chem Eng Data. https://doi.org/10.1021/acs.jced.7b00254
Sarma GK, Bhattacharyya SSGKG (2019) Removal of hazardous basic dyes from aqueous solution by adsorption onto kaolinite and acid - treated kaolinite : kinetics, isotherm and mechanistic study. SN Appl Sci. https://doi.org/10.1007/s42452-019-0216-y
Alam T, Amer K, Mukhlif A et al (2016) Isotherm and kinetics modeling of Pb ( II ) and Cd ( II ) adsorptive uptake from aqueous solution by chemically modified green algal biomass. Model Earth Syst Environ. https://doi.org/10.1007/s40808-016-0157-z
Chantawong V, Harvey NW, Bashkin VN (2003) Comparison of heavy metal adsorptions By Thai Kaolin. Adsorpt J Int Adsorpt Soc 148:111–125
Burham N, Sayed M (2016) Adsorption behavior of Cd2+ and Zn2+ onto natural Egyptian bentonitic clay. Minerals. https://doi.org/10.3390/min6040129
Acknowledgements
This study has not been financed by any government or private funding agencies. We gratefully acknowledge all who contributed to the conduction of this study.
Funding
This research received no external funding.
Author information
Authors and Affiliations
Contributions
Conceptualization, DS, and BKZ; methodology, DS and BKA; software, DS, and BKA; validation, DS, and BKA; formal analysis, DS and BKA; investigation, DS; resources, DS, and BKA; data curation, DS; writing—original draft preparation, DS; writing—review and editing, DS and BKA; visualization, DS and BKA; supervision DS. These results, therefore, are of great importance for the removal of toxic dyes from wastewater and sewage and applied to real sample wastewater.
Corresponding author
Ethics declarations
Competing Interests
Not applicable.
Code availability
Not applicable.
Ethical approval
All of the authors worked on the manuscript, read the final version, and approved it.
Consent to participate
All of the authors worked on the manuscript, read the final version.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary Information
Below is the link to the electronic supplementary material.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Shwan, D.M.S., Aziz, B.K. Enhancing zinc(II) removal from Sulaymaniyah industrial zone sewage using novel adsorbents: a comprehensive study of natural clay, acid/base activated clay, and titanium pillared clay: insights into kinetics and thermodynamics. Reac Kinet Mech Cat 136, 2223–2242 (2023). https://doi.org/10.1007/s11144-023-02455-3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11144-023-02455-3