Summary
Fe-16Al alloy and Cr18-Ni8 austenitic stainless steel were diffusion bonded in a vacuum of 10-4Pa. Microstructure characteristics at the bonded Fe-16Al/Cr18-Ni8 interface were analyzed by scanning electron microscope (SEM) and X-ray diffraction (XRD) technologies. The results indicated that FeAl, Fe3Al, Ni3Al and α-Fe (Al) solid solutions were produced at the bonded Fe-16Al/Cr18-Ni8 interface after diffusion bonding. These phases may accelerate the diffusion and even the formation of the bonded Fe-16Al/Cr18-Ni8 interface. The growth of the interface obeyed the parabolic law and its thickness (X) was expressed by X 2=7.0×10-4exp(-82900/RT)(t-t 0) withtemperature (T) and time (t).
Similar content being viewed by others
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Wang, J., Li, Yj., Ma, Hj. et al. Microstructure and diffusion kinetics at the bondedFe-16Al/Cr18-Ni8interface . React Kinet Catal Lett 87, 67–75 (2005). https://doi.org/10.1007/s11144-006-0010-x
Issue Date:
DOI: https://doi.org/10.1007/s11144-006-0010-x