The structure and properties of composite materials have been studied versus their composition. Comparative analysis of intermetallic titanium materials in dry friction with steel has been carried out. The intermetallic titanium material whose structure is represented by an intermetallic matrix with solid-phase inclusions has the highest tribotechnical properties.
Similar content being viewed by others
References
I. M. Fedorchenko and R. A. Andrievsky, Fundamentals of Powder Metallurgy [in Russian], Inst. Probl. Materialoved., Kyiv (1963), p. 420.
I. M. Fedorchenko, “Antifriction metal ceramic iron-based materials for harsh applications,” in: Proc. 2nd Int. Conf. Powder Metallurgy, Prague (1966), Vol. 3, p. 176.
V. A. Barabash, V. T. Varchenko, A. N. Demidik, and N. A. Krylova, “Promising titanium aluminide materials for end seals of submersible sealed pumps for oil pumping,” Nasosy Oborud., No. 2, 45–47 (2011).
V. A. Barabash, A. N. Demidik, V. L. Syrovatka, and A. P. Umansky, “Development of new wear- and oxidation-resistant intermetallide coatings produced using titanium hydride,” Nasosy Oborud., 91–92, Nos. 2–3, 64–67 (2015).
V. A. Barabash, A. N. Demidik, V. L. Syrovatka, et al., “Effect of coating deposition methods on the properties of titanium aluminide materials,” Powder Metall. Met. Ceram., 55, Nos. 3–4, 236–240 (2016).
G. Shishov, A. Perekhrest, V. Bezus, and A. Elin, “Ways for increasing the wear resistance of hot oil pumps operating on abrasive media,” Nasosy Oborud., 33, No. 4, 36–40 (2005).
A. Shvindin, “Sumy pump engineering for oil processing,” Nasosy Oborud., 51–52, Nos. 4–5, 34–37 (2008).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Poroshkova Metallurgiya, Vol. 57, Nos. 3–4 (520), pp. 77–82, 2018.
Rights and permissions
About this article
Cite this article
Gogaev, K.O., Barabash, V.A., Demidik, A.N. et al. Wear-Resistant High-Temperature Composite Slide Bearings Based on Titanium Aluminides. Powder Metall Met Ceram 57, 186–189 (2018). https://doi.org/10.1007/s11106-018-9967-z
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11106-018-9967-z