The effect of heat treatment on the mechanical properties and microstructure of Fe–30% Cu pseudoalloys doped with 10% Mo is studied. The samples were produced by compacting mechanically alloyed metal powder mixtures and subjecting them to solid-phase sintering (SPS) and liquid-phase sintering (LPS) at 1000 and 1130°C, followed by quenching and tempering. It is shown that doping Fe–Cu pseudoalloys with molybdenum increases the density of the compacts after both SPS and LPS (residual porosity about 1%). The interdiffusion of all the three components promotes the formation of stable heterophase fine-grained microstructure which prevents grain growth and improves the plasticity of the FeCuMo pseudoalloys. Heat treatment increases the strength of FeCuMo and does not affect its high plasticity. The FeCuMo samples produced by SPS and LPS show optimum values of ultimate strength (683–694 MPa and 741–752 MPa), elongation (12.1–12.4% and 8.2–9.4%), and contraction (24.0–25.9% and 12.5–19.7%) after heat treatment.
Similar content being viewed by others
References
I. M. Fedorchenko, I. N. Frantsevich, I. D. Radomysel’skii, et al., Powder Metallurgy: Materials, Technology, Properties, and Applications [in Russian], Naukova Dumka, Kiev (1985), p. 467.
G. G. Gnesin (ed.), Sintered Materials for Electrical and Electronic Engineering [in Russian], Metallurgiya, Moscow (1981), p. 344.
R. M. German, A–Z of Powder Metallurgy, Elsevier, Oxford (2005).
V. I. Nizhenko, V. Ya. Petrishchev, and V. V. Skorokhod, “Effect of interaction between the structural components of W–Co–Sn pseudo-alloys on the kinetics of their compaction during liquid-phase sintering,” Powder Metall. Met. Ceram., 45, No. 11–12, 520–525 (2006).
P. Ya. Radchenko, O. G. Radchenko, V. V. Panichkina, and V. V. Skorokhod, “Effect of molybdenum additions on compaction during sintering of fine-grained iron-copper pseudoalloys,” Powder Metall. Met. Ceram., 43, No. 3–4, 132–138 (2004).
P. Ya. Radchenko O. I. Get’man, V. V. Panichkina, et al., “Effect of molybdenum additives on the mechanical properties of iron-copper pseudoalloys,” Powder Metall. Met. Ceram., 45, No. 9–10, 415–421 (2006).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Poroshkovaya Metallurgiya, Vol. 51, No. 7–8 (486), pp. 12–19, 2012.
Rights and permissions
About this article
Cite this article
Radchenko, P.Y., Get’man, O.I., Panichkina, V.V. et al. Effect of heat treatment on the plasticity of molybdenum-doped iron–copper pseudoalloys. Powder Metall Met Ceram 51, 385–390 (2012). https://doi.org/10.1007/s11106-012-9446-x
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11106-012-9446-x