Skip to main content
Log in

Anodic oxidation of alloys in the (α-Al–Mg2Si) quasibinary section of the Al–Mg–Si ternary system in 3% NaCl solution and principle of independence of electrochemical reactions

  • Published:
Powder Metallurgy and Metal Ceramics Aims and scope

The paper studies the kinetics and mechanisms of anodic oxidation of aluminum alloys in the quasibinary section (α-Al–Mg2Si) of the Al–Mg–Si system in a 3% NaCl solution. According to the principle of independence of reactions, the electrochemical processes in two-phase alloys are shown to take place on each phase separately. On some areas of the surface, Al2O3 is formed as a reaction product, while α-SiO2 is formed on the other areas. It is established that the corrosion of the eutectic component occurs at the early oxidation stages, while α-Al dendrites are uniformly dissolved with a dominating transition of Mg2+ ions into the solution. The alloys that have the minimum amount of the eutectic component exhibit the highest corrosion resistance.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7

Similar content being viewed by others

References

  1. T. M. Legka, Yu. V. Mil’man, et al., A Cast Aluminum Alloy [in Ukrainian], Patent of Ukraine No. 72560, IPC C22C21/08, 21/06 21/00, apll. June 3, 2002; publ. in Bulletin No. 3, March 15 (2005).

  2. F. Eckermann, T. Suter, P. J. Uggowitzer, et al., “In situ monitoring of corrosion processes within the bulk of AlMgSi alloys using X-ray microtomography,” Corrosion Sci., 50, 3455–3466 (2008).

    Article  CAS  Google Scholar 

  3. A. Aballe, M. Bethencourt, F. J. Botana, et al., “Localized alkaline corrosion of alloy AA5083 in neutral 3.5% NaCl solution,” Corrosion Sci., 43, 1657–1674 (2001).

    Article  CAS  Google Scholar 

  4. F. Eckermann, T. Suter, P. J. Uggowitzer, et al., “The influence of MgSi particle reactivity and dissolution processes on corrosion in Al–Mg–Si alloys,” Electrochim. Acta, 54, 844–855 (2008).

    Article  CAS  Google Scholar 

  5. Yu. V. Mil'man, T. M. Legka, et al., A Cast Aluminum Alloy [in Ukrainian], Patent of Ukraine No. 83776, IPC (2006) C22C 21/00 C22C 21/06, No. 07596/07; apll. July 6, 2007; publ. in Bulletin No. 15, August 11 (2008).

  6. O. M. Barabash, Yu. V. Milman, N. P. Korzhova, et al., “Design of new cast aluminum materials using properties of monovariant eutectic transformations L → α-Al + Mg2Si,” Mater. Sci. Forum, 396–402, 729– 734 (2002).

    Article  Google Scholar 

  7. W. Sconeczny, “Model of structure of Al2O3 layer obtained via hard anodizing method,” Surf. Eng., 17, 389–392 (2001).

    Article  Google Scholar 

  8. A. Ravel, Z. K. Tsameret, and E. Grossman, “Surface characterization of thin layers of aluminum oxide,” Surf. Coat. Techn., 88, 103–111 (1996).

    Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to V. A. Lavrenko.

Additional information

Translated from Poroshkovaya Metallurgiya, Vol. 50, No. 9–10 (481), pp. 102–110, 2011.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Lavrenko, V.A., Krasovskii, M.A., Korzhova, N.P. et al. Anodic oxidation of alloys in the (α-Al–Mg2Si) quasibinary section of the Al–Mg–Si ternary system in 3% NaCl solution and principle of independence of electrochemical reactions. Powder Metall Met Ceram 50, 655–661 (2012). https://doi.org/10.1007/s11106-012-9371-z

Download citation

  • Received:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11106-012-9371-z

Keywords

Navigation