The paper examines the phase composition, structure, and erosion properties of B4C–Al composite materials produced by hot pulse pressing. It is shown that powder components actively interact to form new phases during pressing, TiB2 and AlB12 being the main phases. The erosion properties of the composites are greatly dependent on the composition of powder mixtures and compaction temperature. The structural features of the composites, namely the nanosized secondary phases at B4C grain boundaries, intensify the anode mass transfer to the titanium substrate and the formation of a protective coating up to 50 μm thick. The microhardness of this coating is about 40 GPa and its wear resistance is threefold higher than that of the substrate material.
Similar content being viewed by others
References
Yu. G. Tkachenko, V. F. Britun, G. O. Bovkun, and D. Z. Yurchenko, “Electroerosion behavior of ceramics based on boron carbide: phase composition, structure, and properties of protective spark coatings,” Powder Metall. Met. Ceram., 44, No. 11–12, 537–544 (2005).
I. A. Podchernyaeva, A. D. Panasyuk, V. A. Lavrenko, et al., “Structure and properties of composite electrospark, laser, and magnetron deposited AlN–TiB2 coatings,” Powder Metall. Met. Ceram., 40, No. 9–10, 501–508 (2001).
M. A. Teplenko, I. A. Podchernyaeva, A. D. Panasyuk, et al., “Structure and wear resistance of Coatings on Titanium Alloy and Steels Obtained by Electrospark Alloying with AlN−ZrB2 Material,” Powder Metall. Met. Ceram., 41, No. 3–4, 154–161 (2002).
I. A. Podchernyaeva, D. V. Yurechko, A. D. Panasyuk, and M. A. Teplenko, “Mass transfer and adhesion in electrospark alloying of Al9 alloy with AlN–Ti(Zr)B2–Ti(Zr)Si2 ceramic electrodes,” Powder Metall. Met. Ceram., 43, No. 9–10, 473–479 (2004).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Poroshkovaya Metallurgiya, Vol. 48, No. 1–2 (465), pp. 78–85, 2009.
Rights and permissions
About this article
Cite this article
Tkachenko, Y.G., Koval’chenko, M.S., Britun, V.F. et al. Production, properties, and erosion characteristics of B4C−Al composite materials. Powder Metall Met Ceram 48, 60–65 (2009). https://doi.org/10.1007/s11106-009-9095-x
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11106-009-9095-x