Abstract
The nanocrystalline material of an artificial carbon pyroceram mitral valve obtained by sintering of 15 wt.% B4C with crystals <10 nm that are uniformly distributed in 85 wt.% carbon with particles ∼10 nm has exceptionally high chemical stability in blood plasma. The electrochemical interaction resulting from contact with a possible microadditive (for example, iron) on the valve surface is experimentally modeled by polarization induced by an external current source specially to create extreme corrosion conditions. The interaction kinetics is studied at 37 °C using anodic polarization curves. Curcumin is used as an analytical reagent for spectrophotometry of boron traces in a solution. Emissive spectroscopy is used to determine iron traces in the spume-like film formed after polarization. It is established that a chemisorbed oxygen film forms when microgalvanic elements appear at 0.4 V and stable passivation of the valve surface is observed at ∼1.0 V since a low-conductive nanostructured carbon film forms. It is shown that this film results from the discharge of α-amino acids on the valve surface (amino acid residues of complex peptide chains of plasma proteins) containing heterocyclic rings. The sessile drop method shows that the valve is promptly wetted by blood plasma (wetting angle is 50 °), this also promotes the formation of a stable protective film on its surface.
Similar content being viewed by others
References
P. I. Zolkin and V. F. Tatarinov, “Carbon endoprostheses and implants,” Refract. Industr. Ceramics, 40, No. 3–4, 150–151 (1999).
V. F. Tatarinov, Method and Device for Producing Endoprosthesis Blanks of Carbon-Bearing Material [in Russian], Russian Patent No. 2163105, Published 2001.
Yu. S. Vergil’ev and V. F. Tatarinov, “Structure of carbon glass ceramics,” Materialoved., No. 4, 38–42 (1999).
V. F. Tatarinov and P. I. Zolkin, “Advances in the technology of carbon glass-ceramic material for artificial heart valves,” Refract. Industr. Ceramics, 40, No. 3–4, 118–119 (1999).
V. F. Tatarinov, Yu. S. Vergil’ev, and S. V. Evdokimov, “Carbon-glass ceramics and their properties,” J. Adv. Mat., 5, No. 4, 41–45 (2001).
P. I. Zolkin, T. V. Leonova, T. V. Yudina, and V. F. Tatarinov, “Research into the properties of carbon materials used in medicine,” Konvers. Mashinostr., No. 3, 100–104 (2003).
V. S. Kombalov and V. F. Tatarinov, “Computation of wear in artificial heart valves,” J. Eng. Med., 206, 175–179.
V. A. Lavrenko, V. A. Shvets, V. N. Talash, and T. V. Khomko, “Corrosion of titanium nitride with different nitrogen content in 3% NaCl solution,” Fiz. Khim. Mekh. Mater., 2, No. 4, Special Issue, 748–751 (2004).
L. Poling, General Chemistry, W. H. Freeman & Co., New York (1970).
E. A. Moelwyn-Hughes, Physical Chemistry, Pergamon Press, London (1957).
E. M. Shvarts, Analytical Chemistry of Boron [in Russian], Riga (1989), p. 94.
Yu. V. Naidich, Contact Phenomena in Metal Alloys [in Russian], Naukova Dumka, Kiev (1972), p. 196.
Author information
Authors and Affiliations
Additional information
__________
Translated from Poroshkovaya Metallurgiya, Vol. 47, No. 3–4 (460), pp. 106–113, 2008.
Rights and permissions
About this article
Cite this article
Lavrenko, V.A., Zolkin, P.I., Talash, V.N. et al. Interaction of artificial carbon pyroceram mitral valve with blood plasma. Powder Metall Met Ceram 47, 242–247 (2008). https://doi.org/10.1007/s11106-008-9010-x
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11106-008-9010-x