Abstract
The quest for high-entropy alloys (HEAs) with superior resistance against oxidation at elevated temperatures is one of the urgent problems in materials society, since HEAs are candidates for coating machinery parts operating in aggressive conditions (such as turbine blades, turbojet and jet engines, etc.). In this study, the effect of minor platinum alloying on the microstructure, phase composition and high-temperature oxidation resistance of Al0.5CoCrFeNiCuPt0.3 HEA was studied. It was demonstrated that platinum does not precipitate as an intermetallic phases; rather, it dissolves in the solid solution phases. High-temperature oxidation tests were carried out in a muffle furnace at 900 °C and 1000 °C for 50 h in air. It was found out that platinum alloying significantly increases oxidation resistance of Al0.5CoCrFeNiCuPt0.3 HEA at elevated temperatures with specific weight change of 0.139 mg/cm2 and 0.238 mg/cm2 after 50 h of isothermal exposure to 900 °C and 1000 °C, respectively. A dense oxide layer, mainly composed of Al2O3, without defects and pores protected the surface of the alloy.
Similar content being viewed by others
References
B. Cantor, I. T. H. Chang, P. Knight, and A. J. B. Vincent, Materials Science and Engineering: A 375–377, 213 (2004). https://doi.org/10.1016/j.msea.2003.10.257.
J. W. Yeh, S. K. Chen, S. J. Lin, J. Y. Gan, T. S. Chin, T. T. Shun, C. H. Tsau, and S. Y. Chang, Advanced Engineering Materials 6, 299 (2004). https://doi.org/10.1002/adem.200300567.
E. P. George, D. Raabe, and R. O. Ritchie, Nature Reviews Materials 4, 515 (2019). https://doi.org/10.1038/s41578-019-0121-4.
Z. Li, K. G. Pradeep, Y. Deng, D. Raabe, and C. C. Tasan, Nature 534, 227 (2016). https://doi.org/10.1038/nature17981.
E. P. George, W. A. Curtin, and C. C. Tasan, Acta Materialia 188, 435 (2020). https://doi.org/10.1016/j.actamat.2019.12.015.
A. K. Kasar, K. Scalaro, and P. L. Menezes, Materials 14, 5814 (2021). https://doi.org/10.3390/ma14195814.
O. Samoilova, N. Shaburova, A. Ostovari Moghaddam, and E. Trofimov, Materials Letters 328, 133190 (2022). https://doi.org/10.1016/j.matlet.2022.133190.
S. Veselkov, O. Samoilova, N. Shaburova, and E. Trofimov, Materials 14, 2595 (2021). https://doi.org/10.3390/ma14102595.
P. Kumar, T.-N. Lam, P. K. Tripathi, S. S. Singh, P. K. Liaw, and E.-W. Huang, APL Materials 10, 120701 (2022). https://doi.org/10.1063/5.0116605.
T. M. Butler and M. L. Weaver, Journal of Alloys and Compounds 674, 229 (2016). https://doi.org/10.1016/j.jallcom.2016.02.257.
A. Mohanty, J. K. Sampreeth, O. Bembalge, J. Y. Hascoet, S. Marya, R. J. Immanuel, and S. K. Panigrahi, Surface and Coatings Technology 380, 125028 (2019). https://doi.org/10.1016/j.surfcoat.2019.125028.
C. Jang, D. Lee, and D. Kim, International Journal of Pressure Vessels and Piping 85, 368 (2008). https://doi.org/10.1016/j.ijpvp.2007.11.010.
Moghaddam A. Ostovari, N. A. Shaburova, M. V. Sudarikov, S. N. Veselkov, O. V. Samoilova, and E. A. Trofimov, Vacuum 192, 110412 (2021). https://doi.org/10.1016/j.vacuum.2021.110412.
L. Chen, Z. Zhou, Z. Tan, D. He, K. Bobzin, L. Zhao, M. Öte, and T. Königstein, Journal of Alloys and Compunds 764, 845 (2018). https://doi.org/10.1016/j.jallcom.2018.06.036.
N. A. Shaburova, Moghaddam A. Ostovari, S. N. Veselkov, M. V. Sudarikov, O. V. Samoilova, and E. A. Trofimov, Physical Mesomechanics 24, 653 (2021). https://doi.org/10.1134/S1029959921060035.
J. J. Yang, C. M. Kuo, P. T. Lin, H. C. Liu, C. Y. Huang, H. W. Yen, and C. W. Tsai, Journal of Alloys and Compounds 825, 153983 (2020). https://doi.org/10.1016/j.jallcom.2020.153983.
J. Lu, Y. Chen, H. Zhang, N. Ni, L. Li, L. He, R. Mu, X. Zhao, and F. Guo, Corrosion Science 166, 108426 (2020). https://doi.org/10.1016/j.corsci.2019.108426.
J. Dąbrowa, G. Cieślak, M. Stygar, K. Mroczka, K. Berent, T. Kulik, and M. Danielewski, Intermetallics 84, 52 (2017). https://doi.org/10.1016/j.intermet.2016.12.015.
W. Li, L. B. Fu, Y. D. Liu, W. L. Zhang, T. G. Wang, S. M. Jiang, J. Gong, and C. Sun, Corrosion Science 176, 108892 (2020). https://doi.org/10.1016/j.corsci.2020.108892.
T. Baskaran, N. Esakkiraja, C. Samartha, P. Kumar, V. Jayaram, and A. Paul, Surface and Coatings Technology 426, 127766 (2021). https://doi.org/10.1016/j.surfcoat.2021.127766.
M. Bai, Y. Chen, and P. Xiao, Coatings 11, 441 (2021). https://doi.org/10.3390/coatings11040441.
Z. M. Zhou, H. Peng, L. Zheng, H. B. Guo, and S. K. Gong, Rare Metals 40, 2568 (2021). https://doi.org/10.1007/s12598-017-0980-z.
O. Samoilova, S. Pratskova, I. Suleymanova, N. Shaburova, Moghaddam A. Ostovari, and E. Trofimov, Metals 13, 1709 (2023). https://doi.org/10.3390/met13101709.
T. Abe, B. Sundman, and H. Onodera, Journal of phase equilibria and diffusion 27, 5 (2006). https://doi.org/10.1361/105497196X92736.
H. M. Daoud, A. M. Manzoni, and R. Völkl, Advanced Engineering Materials 17, 1134 (2015). https://doi.org/10.1002/adem.201500179.
C. M. Lin and H. L. Tsai, Intermetallics 19, 288 (2011). https://doi.org/10.1016/j.intermet.2010.10.008.
R. A. Swalin, Thermodynamics of Solids, 2nd ed, (Wiley, New York, 1972), p. 400.
A. Takeuchi and A. Inoue, Materials Transactions 46, 2817 (2005). https://doi.org/10.2320/matertrans.46.2817.
W. R. Wang, W. L. Wang, and J. W. Yeh, Journal of Alloys and Compound 589, 143 (2014). https://doi.org/10.1016/j.jallcom.2013.11.084.
M. Ogura, T. Fukushima, R. Zeller, and P. H. Dederichs, Journal of Alloys and Compound 715, 454 (2017). https://doi.org/10.1016/j.jallcom.2017.04.318.
Y. Y. Liu, Z. Chen, Y. Z. Chen, J. C. Shi, Z. Y. Wang, S. Wang, and F. Liu, Vacuum 169, 108837 (2019). https://doi.org/10.1016/j.vacuum.2019.108837.
S. Abbaszadeh, A. Pakseresht, H. Omidvar, and A. Shafiei, Surfaces and Interfaces 21, 100724 (2020). https://doi.org/10.1016/j.surfin.2020.100724.
C. C. Tung, J. W. Yeh, T. Shun, S. K. Chen, Y. S. Huang, and H. C. Chen, Materials Letters 61, 1 (2007). https://doi.org/10.1016/j.matlet.2006.03.140.
J. Zhu, S. Lu, Y. Jin, L. Xu, X. Xu, C. Yin, and Y. Jia, Oxidation of Metals 94, 265 (2020). https://doi.org/10.1007/s11085-020-09991-6.
D. Lussana, D. Baldissin, M. Massazza, and M. Baricco, Oxidation of Metals 81, 515 (2014). https://doi.org/10.1007/s11085-013-9465-0.
A. Anupam, A. S. M. Ang, K. Guruvidyathri, M. Abbas, D. Sivaprahasam, P. Munroe, C. C. Berndt, B. S. Murty, and R. S. Kottada, Corrosion Science 184, 109381 (2021). https://doi.org/10.1016/j.corsci.2021.109381.
M. J. Pavel and M. L. Weaver, High Temperature Corrosion of Materials (2024). https://doi.org/10.1007/s11085-024-10225-2.
Acknowledgements
The study was supported by the Russian Science Foundation, project No. 23-23-00107, https://rscf.ru/en/project/23-23-00107/.
Author information
Authors and Affiliations
Contributions
Olga Samoilova involved in conceptualization, investigation, validation, writing - original draft, writing - review and editing; Ilsiya Suleymanova involved in investigation, writing - original draft; Nataliya Shaburova involved in Iinvestigation, validation; Ahmad Ostovari Moghaddam involved in validation, writing - review and editing; Evgeny Trofimov involved in conceptualization, writing - review and editing.
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Samoilova, O., Suleymanova, I., Shaburova, N. et al. The Behavior of Al0.5CoCrFeNiCuPt0.3 High-Entropy Alloy During High-Temperature Oxidation. High Temperature Corrosion of mater. (2024). https://doi.org/10.1007/s11085-024-10248-9
Received:
Revised:
Accepted:
Published:
DOI: https://doi.org/10.1007/s11085-024-10248-9