Abstract
A simple example of an isothermal thermodynamic phase diagram for a quaternary system composed of a ternary A–B–C alloy reacting with a single oxidant (O) has been calculated assuming that oxides are insoluble and that they do not interact with each other. The 2D thermodynamic diagrams of the ternary metal–oxygen systems composed of the three types of binary alloys plus the oxidant are reviewed first, and then the 2D sections of the 3D phase diagram along planes of constant values of one of the variables involved are explored in detail. Finally, the structure of the 3D diagram is presented by means of appropriate figures and is discussed by examining in detail the connections between the critical curves, surfaces and volumes in 3D space with the corresponding critical features, including points, curves and surfaces, of the 2D sections. In addition, the possible application of thermodynamic diagrams to predict the nature of the oxidation products is briefly discussed in combination with the concept of oxidation maps.
Similar content being viewed by others
References
N. Birks, G. H. Meier, and F. S. Pettit, Introduction to the High Temperature Oxidation of Metals, 2nd edn. (Cambridge University Press, Cambridge, 2006).
F. Gesmundo, S. Wang, and Y. Niu, Complete kinetic maps for binary alloys forming two insoluble oxides under high oxygen pressures, Oxid. Met. 73, 65–81 (2010).
S. Wang, C. S. Ni, F. Gesmundo, and Y. Niu, Isothermal phase diagrams of binary alloys and two oxidants, Oxid. Met. 73, 419–453 (2010).
R. Jha, C. W. Haworth, and B. B. Argent, The formation of diffusion coatings on some low-alloy steels and their high temperature oxidation behaviour: Part 2. Oxidation studies, CALPHAD. 25, 667–689 (2001).
D. J. Young, High Temperature Oxidation and Corrosion of Metals, 1st edn. (Elsevier, Amsterdam, 2008).
F. Gesmundo and Y. Niu, The internal oxidation of ternary alloys I: The single oxidation of the most-reactive component under low oxidant pressures, Oxid. Met. 60, 347–370 (2003).
Y. Niu and F. Gesmundo, The internal oxidation of ternary alloys II: The coupled internal oxidation of the two most-reactive components under intermediate oxidant pressures, Oxid. Met. 60, 371–391 (2003).
Y. Niu and F. Gesmundo, The internal oxidation of ternary alloys. III: The coupled internal oxidation of the two most-reactive components under high oxidant pressures, Oxid. Met. 62, 341–355 (2004).
F. Gesmundo and Y. Niu, The internal oxidation of ternary alloys. IV: The internal oxidation of the most-reactive component beneath external scales of the component having intermediate reactivity, Oxid. Met. 62, 357–374 (2004).
F. Gesmundo and Y. Niu, The internal oxidation of ternary alloys. V: The transition from internal to external oxidation of the most-reactive component under low oxidant pressures, Oxid. Met. 62, 375–390 (2004).
Y. Niu and F. Gesmundo, The internal oxidation of ternary alloys. VI: The transition from internal to external oxidation of the most-reactive component under intermediate oxidant pressures, Oxid. Met. 62, 391–410 (2004).
F. Gesmundo and Y. Niu, The internal oxidation of ternary alloys. VII: The transition from the internal to the external oxidation of the two most-reactive components under intermediate oxidant pressures, Oxid. Met. 66, 69–89 (2006).
Y. Niu and F. Gesmundo, The internal oxidation of ternary alloys. VIII: The transition from the internal to the external oxidation of the two most-reactive components under high-oxidant pressures, Oxid. Met. 65, 329–355 (2006).
Y. Niu and F. Gesmundo, An approximate analysis of the external oxidation of ternary alloys forming insoluble oxides. I: High oxidant pressures, Oxid. Met. 56, 517–536 (2001).
F. Gesmundo, Y. Niu, and W. Wang, An approximate analysis of the external oxidation of ternary alloys forming insoluble oxides. II: Low oxidant pressures, Oxid. Met. 56, 537–549 (2001).
Z. G. Zhang, F. Gesmundo, P. Y. Hou, and Y. Niu, Criteria for the formation of protective Al2O3 scales on Fe–Al and Fe–Cr–Al alloys, Corros. Sci. 48, 741–765 (2006).
X. J. Zhang, M. Al-Omary, and Y. Niu, High temperature oxidation of the three-phase alloys Cu-20Ni-30Cr and Cu-20Ni-40Cr under a low oxygen pressure, High Temp. Mat. Pr-Isr. 24, 175–182 (2005).
Q. Q. Guo, S. Liu, X. F. Wu, L. L. Liu, and Y. Niu, Scaling behavior of two Fe–xCr–5Si alloys under high and low oxygen pressures at 700 °C, Corros. Sci. 100, 579–588 (2015).
N. Saunders and A. P. Miodownik, CALPHAD (Calculation of Phase Diagrams): A Comprehensive Guide, Vol. 1, 1st edn. (Pergamon, Oxford, 1998).
Y. Ding, Y. Liu, Y. Yan, and X. Su, Thermodynamic analysis and experimental study on the phase equilibria in Fe–Mn–Cr–O system, J. Alloys Compd. 741, 1080–1090 (2018).
G. Lindwall, X. L. Liu, A. Ross, H. Fang, B. C. Zhou, and Z. K. Liu, Thermodynamic modeling of the aluminum–iron–oxygen system, CALPHAD. 51, 178–192 (2015).
L. Kjellqvist, M. Selleby, and B. Sundman, Thermodynamic modelling of the Cr–Fe–Ni–O system. CALPHAD, 32, 577–592 (2008).
L. Kjellqvist and M. Selleby, Thermodynamic Assessment of the Fe–Mn–O System, J. Phase Equilib. Diff. 31, 113–134 (2010).
R. A., HSA chemistry version 6.0, Outokumpu Research Oy, Finland (2006).
Acknowledgements
Financial support under the NSFC Projects (Nos. 51371183 and 51671203) is gratefully acknowledged.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Shen, J., Guo, X. & Niu, Y. Thermodynamic Phase Diagrams of Ternary Alloys Exposed to a Single Oxidant. Oxid Met 92, 195–225 (2019). https://doi.org/10.1007/s11085-019-09919-9
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11085-019-09919-9