Abstract
The high temperature performance of Ni-based superalloy Superni-75 has been evaluated under cyclic conditions for 1,000 h in real service environment of the waste incinerator based upon medical waste as fuel. The performance has been characterized via surface morphology, phase composition and element concentration using the combined techniques of XRD, SEM/EDX, BSEI and EPMA. Though, initially due to chlorine-based corrosion attack on Superni-75 alloy, there was inner penetration of the corrosive species. However, with the growth of a thin Cr2O3 interface layer along the scale/surface boundary, the performance of the alloy improved against the attack by the flue gases in the real service conditions of the medical waste incinerator. Boiler tubes made of Superni-75 were estimated to have an erosion-corrosion rate of about 65 mils/year.
Similar content being viewed by others
References
A. J. Pedersen, F. J. Frandsen and C. Riber, Energy and Fuels 23, 3475 (2009).
H. Singh, D. Puri and S. Prakash, Reviews on Advance Materials Science 16, 27 (2007).
N. Bala, H. Singh and S. Prakash, Materials and Design 31, 244 (2010).
J. Bujak, Applied Energy 86, 2386 (2009).
T. S. Sidhu, S. Prakash and R. D. Agrawal, Scripta Materialia 55, 179 (2006).
H. J. Grabke, E. Reese and M. Spiegel, Corrosion Science 37, 1023 (1995).
M. Hara and Y. Shinata, Materials Transactions JIM 33, 758 (1992).
Y. Shinata and Y. Nishi, Oxidation of Metals 26, 201 (1986).
G. Sorell, Materials at High Temperatures 28, 137 (1997).
Y. Kawahara, Corrosion Science 44, 223 (2002).
A. Zahs, M. Spiegel and J. Hans Grabke, Corrosion Science 42, 1093 (2000).
M. A. Uusitalo, P. M. J. Vuoristo and T. A. Mantyla, Materials Science and Engineering: A 346, 168 (2003).
N. Otsuka, Corrosion Science 50, 1627 (2008).
M. Montgomery, O. H. Larsen, Corrosion/2001 paper no. 01184 NACE international.
H. Morrow, D. L. Sponseller and E. Kalns, Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science 5, 673 (1972).
T. S. Sidhu, S. Prakash, R. D. Agrawal and R. Bhagat, Sadhana 34, 299 (2009).
Acknowledgment
Author ‘Harminder Singh’ thankfully acknowledges the research grant under UGC Minor Project from UGC, New Delhi, Govt. of India, for carrying out this R&D work on ‘Studies on the behavior of coatings in improving the resistance to hot corrosion degradation in waste incineration environment’, vide F. No. 39-1003/2010(SR).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Singh, H., Sidhu, T.S. High Temperature Corrosion Behavior of Ni-based Superalloy Superni-75 in the Real Service Environment of Medical Waste Incinerator. Oxid Met 80, 651–668 (2013). https://doi.org/10.1007/s11085-013-9414-y
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11085-013-9414-y