Abstract
The deformation of the oxide layer grown in ultra low carbon steel was studied by means of electron backscattered diffraction analyses. Samples of the steel were reheated for shorts periods of time at 1050 °C in a chamber designed to obtain thin scale layers before deforming them by plane strain compression at temperatures ranging from 650 to 1050 °C. Microstructural analyses showed that the oxide layer was made almost exclusively of wustite that is ductile when deformed above 900 °C. It is found that wustite develops texture components of the cube and rotated cube type while growing; these components rotate towards 〈201〉 {100} components once a certain degree of deformation is achieved. Undeformed ferrite close to the oxide layer shows weak 〈201〉 {100} components that rotate into weak rotated cube components when the substrate is deformed in the austenite range and to strong 〈554〉 {225} components when deformed in ferrite. Rolling trials carried out in an experimental mill showed similar trends.
Similar content being viewed by others
References
M. M. Wolf, Iron and Steelmaker 27, 63 (2000).
M. M. Wolf, Iron and Steelmaker 27, 114 (2000).
R. Y. Chen and W. Y. D. Yuen, Oxidation of Metals 59, 433 (2003).
K. Stanley, J. von Hoene, and R. T. Huntoon, Transactions ASM 43, 426 (1951).
F. Païdassi, Revue de Metallurgie 54, 569 (1957).
O. Kubaschewsky and B. E. Hopkins, Oxidation of Metals and Alloys (Butterworths, London, 1962).
N. Birks and A. Nicholson, Iron Steel Inst. Sp. Pub. 123 (Iron Steel Inst., London, 1970), p. 219.
K. W. Browne, J. Dryden, and M. Assefpour, in Recent Advances in Heat Transfer and Micro-Structure Modelling for Metal Processing, eds. R.-M. Guo and J. J. Too, MD-vol. 67 (ASME, New York, 1995), p. 187.
H. T. Abuluwefa, R. I. L. Guthrie, and F. Ajersch, Metallurgical and Materials Transactions A 28A, 1643 (1997).
H. A. Wriedt, in Binary Alloy Phase Diagrams, vol. 2, 2nd edn., eds. T. B. Massalski, H. Okamoto, P. R. Subramanian, and L. Kacprzak (ASM International, Metals Park, OH, 1990), p. 1739.
Y. Hidaka, T. Anraku, and N. Otsuka, Oxidation of Metals 59, 97 (2003).
M. Kryzanowski, C. M. Sellars, and J. H. Beynon, Thermomechanical Processing: Mechanics, Microstructure and Control, eds. E. J. Palmiere, M. Mahfouf, and C. Pinna, (U. Sheffield, Sheffield, 2002), p. 94.
D. Filatov, O. Pawelski, and E. Rasp, Steel Research International 75, 20 (2004).
L. Suárez, Y. Houbaert, X. Vanden Eynde, and R. Colás, Corrosion Science 59, 309 (2009).
R. Y. Chen and W. Y. D. Yuen, ISIJ International 45, 52 (2005).
D. P. Burke and R. L. Higginson, Scripta Materialia 42, 277 (2000).
B. Kim and J. A. Szpunar, Scripta Materialia 44, 2605 (2001).
R. L. Higginson, B. Roebuck, and E. J. Palmiere, Scripta Materialia 47, 337 (2002).
S. I. Wright, B. L. Adams, and K. Kunze, Metallurgical Transactions A 24A, 819 (1993).
F. J. Humphreys, Journal of Materials Science 36, 3833 (2001).
H. J. Bunge, Texture Analysis in Materials Science (Butterworths, London, 1982).
R. K. Ray, J. J. Jonas, M. P. Butrón-Guillén, and J. Savoie, ISIJ International 34, 927 (1984).
D. Duly, G. J. Baxter, H. R. Shercliff, J. A. Whiteman, C. M. Sellars, and M. F. Ashby, Acta Materialia 44, 2947 (1996).
L. Suárez, Y. Houbaert, X. Vanden Eynde, and R. Colás, Oxidation of Metals 70, 137 (2008).
A. Airod, H. Vandekinderen, J. Barros, R. Colás, and Y. Houbaert, Journal of Materials Processing Technology 134, 398 (2003).
P. R. Calvillo, T. Ros-Yanez, D. Ruiz, R. Colás, and Y. Houbaert, Materials Science and Technology 22, 1105 (2006).
L. Suárez, Y. Houbaert, X. Vanden Eynde, and R. Colás, Corrosion Science 59, 309 (2009).
R. Colás, Modelling and Simulation in Materials Science and Engineering 3, 437 (1995).
M. Torres and R. Colás, Journal of Materials Processing Technology 105, 258 (2000).
L. Suárez, Growth and Deformation Behaviour of Oxide Scales on Steel, Ph.D. Thesis, University of Ghent, Belgium, 2007.
U. F. Kocks and H. Mecking, Acta Metallurgica 29, 1865 (1981).
T. Sakai and J. J. Jonas, Acta Metallurgica 32, 189 (1984).
Acknowledgements
The authors thank the support provided by the Centre for Research in Metallurgy, Belgium, and the Fund for International Cooperation in Science and Technology European Union-Mexico (Fondo de Cooperación Internacional en Ciencia y Tecnología Unión Europea—México) FONCICYT, for the support to this work.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Suárez, L., Rodríguez-Calvillo, P., Houbaert, Y. et al. Analysis of Deformed Oxide Layers Grown on Steel. Oxid Met 75, 281–295 (2011). https://doi.org/10.1007/s11085-010-9231-5
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11085-010-9231-5