Abstract.
Ni–22Cr–10A1–1Y and Stellite-6 coatings were deposited on boiler-tube steels, namely ASTM-SA210-Grade A1, ASTM-SA213-T-11 and ASTM-SA213-T-22, by a shrouded plasma-spray process. The NiCrA1Y alloy powder was also sprayed as a bond coat before applying a Stellite-6 coating. The cyclic-oxidation behavior of the NiCrA1Y bond coats and Stellite-6 coating were evaluated at 900 °C. Visual observations and gravimetric data were measured at the end of each cycle. Finally, the scale was analyzed using X-ray Diffraction, Scanning-Electron Microscope, Energy-Dispersive X-Ray Studies and Electron-Probe Micro-Analyzer techniques. The coatings were found to be effective in increasing resistance to oxidation at the test temperature of 900 °C. The protection is higher in the case of the Stellite-6 coating. The protection is lesser for both coating types when T22 steel was the substrate and higher in the case of GrA1 steel. The deleterious behavior of Mo present in the T22 steel is perhaps responsible for conferring lesser protection.
Similar content being viewed by others
References
U. K. Chatterjee S. K. Bose S. K. Roy (2001) Environmental Degradation of Metals Marcel Dekker New York
P. Fauchais J. F. Coudert M. Vardelle (1997) Journal of De Physique IV 7 IssueIDC4 187–98
R. F. Bunshah (2001) Handbook of Hard Coatings, Deposition Technologies, Properties and Applications Noyes Pub. Park Ridge New Jersey
P. V. Ananthapadmanabhan K. P. Sreekumar K. V. Muraleedharan N. Venkatramani (1991) Surface Coatings Technology 49 62
B. S. Sidhu S. Prakash (2003) Surface Coatings Technology 166 IssueID1 89
B. S. Sidhu D. Puri S. Prakash (2004) Materials Science Engineering A 368 IssueID1-2 149
B. S. Sidhu D. Puri S. Prakash (2004) Journal of Materials Processing Technology 159 IssueID3 347
Metals Handbook, Atlas of Microstructures of Industrial Alloys, Vol. 7 (ASM Publication, Materials Park, Ohio, 1972).
H. Chen I. M. Hutchings (1998) Surface Coatings Technology 107 106
L. C. Erickson R. Westergard V. Wiklund N. Axen H. M. Hawthorne S. Hogmark (1998) Wear 214 30
V. H. Hidalgo, F, J. B. Varela, and A. C. Menendez, in Proceedings of the 15th International Thermal Spray Conference, 25–29th May (Nice, France, 1998), pp. 617–621.
V. H. Hidalgo, F. J. B. Varela, S. P. Martinez, and S. G. Espana, in Proceedings of the United Thermal Spray Conference (Germany, 1999), pp. 683–686.
F. J. Belzunce V. Higuera S. Poveda (2001) Materials Science and Engineering A 297 IssueID(1–2) 162
P. Vuoristo, K. Niemi, A. Makela, and T. Mantyla, in Proceedings of the 7th National Thermal Spray Conference (Boston, Massachusetts, 1994), pp. 121–126.
I. C. Hsu S. K. Wu (1997) Surface Coatings Technology 90 6
R. Westergard L. C. Erickson N. Axen H. M. Hawthorne S. Hogmark (1998) Tribology International 31 IssueID5 271
G. Y. Lai, High Temperature Corrosion of Engineering Alloys (ASM International Book, 1990).
A. Strawbridge R. A. Rapp (1994) Journal of Electrochemical Society 141 IssueID7 1905
K. L. Luthra (1985) Journal of Electrochemical Society 132 IssueID6 1293
Z. Liu W. Gao K. L. Dahm F. Wang (1998) Acta Materialia 46 IssueID5 169
Y. N. Wu G. Zhang Z. C. Feng B. C. Zhang Y. Liang F. J. Liu (2001) Surface Coatings Technology 138 56
X. Wu D. Weng Z. Chen L. Xu (2001) Surface Coatings Technology 140 231
G. J. Santoro (1979) Oxidation of Metals 13 IssueID5 405
B. Wang J. Gong A. Y. Wang C. Sun R. F. Huang L. S. Wen (2002) Surface Coatings Technology 149 IssueID1 70
H. E. Evans M. P. Taylor (2001) Oxidaion of Metals 55 IssueID1–2 17
P. Niranatlumpong C. B. Ponton H. E. Evans (2000) Oxidation of Metals 53 IssueID3–4 241
N. S.’Bornstein, M. A. Decrescente, and H. A. Roth, in Proceedings of Conference on Gas Turbine Materials the Marine Environment, MMIC-75-27 (Columbus, Ohio, USA, 1975, pp.115–160).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Sidhu, B.S., Prakash, S. High-Temperature Oxidation Behavior of NiCrA1Y Bond Coats and Stellite-6 Plasma-Sprayed Coatings. Oxid Met 63, 241–259 (2005). https://doi.org/10.1007/s11085-005-3203-1
Received:
Revised:
Issue Date:
DOI: https://doi.org/10.1007/s11085-005-3203-1