Skip to main content
Log in

Design and optimization of hexagonal SPR-based photonic crystal fiber magnetic field sensor with magnetic fluid infiltration

  • Published:
Optical and Quantum Electronics Aims and scope Submit manuscript

Abstract

A surface plasmon resonance (SPR)-based photonic crystal fiber (PCF) magnetic field sensor with hexagonal lattice is proposed. Magnetic fluid is injected into two air holes for magnetic field sensing. In order to obtain the optimal structure of magnetic field sensor, four types of hexagonal PCF models are discussed and compared. The influence of structure parameters d, \(d _1\), \(d _2\), t, D, and \(\Lambda\) on sensing characteristics is analyzed when the PCF-3 is determined. The maximum sensitivity and corresponding resolution can reach 1150 pm/Oe and 0.087 Oe, and figure of merit (FOM) is up to 0.0556/Oe in the magnetic range of 30–150 Oe. The maximum wavelength sensitivity is 25000 nm/RIU, when the range of refractive index (RI) is from 1.420 to 1.450. In addition, the temperature sensitivity is only 65 pm/K, indicating small temperature crosstalk. The proposed sensor has the advantages of large FOM, good linearity and simple structure, enabling accurate measurement of magnetic field, especially suitable for weak magnetic field detection. Good performance makes it applicable to industrial production, military affairs, health and environmental monitoring.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14

Similar content being viewed by others

Data svailibility

Data will be made available on request.

References

Download references

Acknowledgements

Supported by the National Natural Science Foundation of China under Grant Nos. U22A20221, 61836011 and 71790614, the Fundamental Research Funds for the Central Universities 2020GFZD008, the 111 Project (B16009), Natural Science Foundation of Liaoning Province (2021-MS093, 2022-MS-119) and the Basic Scientific Research Project of the Education Department of Liaoning Province in 2021(LJKZ0014).

Funding

The authors have not disclosed any funding.

Author information

Authors and Affiliations

Authors

Contributions

Chang Tang and Dan Yang wrote the main manuscript text and all authors commented on the manuscript. All authors contributed to the study conception, data collection and design. All authors read and approved the final manuscript.

Corresponding author

Correspondence to Dan Yang.

Ethics declarations

Conflict of interest

The authors declare no competing interests.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Tang, C., Yang, D., Cheng, T. et al. Design and optimization of hexagonal SPR-based photonic crystal fiber magnetic field sensor with magnetic fluid infiltration. Opt Quant Electron 56, 88 (2024). https://doi.org/10.1007/s11082-023-05532-y

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1007/s11082-023-05532-y

Keywords

Navigation