Abstract
A technology of microrelief formation on the fused silica glass surface by laser induced black body heating is considered. An ytterbium fiber laser and a pressed graphite as an absorbent of laser radiation are used in this technology. The depth of the formed relief depending on the laser interact parameters has been investigated. It is shown that the depth increase linearly with increasing of laser radiation power, pulse duration and number of pulses. Possible mechanisms microrelief formation on the glass surface is discussed.
Similar content being viewed by others
References
Baglin, J.: Ion beam nanoscale fabrication and lithography—a review. Appl. Surf. Sci. 258(9), 4103–4111 (2012)
Chao, H., Furong, L., Weiping, Z., Jimin, C.: Fabrication of microtransmittance grating using laser induced backside dry etching. J. Laser Appl. 24(1), 012001 (2012). doi:10.2351/1.3656488
Chen, F., Liu, H., Yang, Q., Wang, X., Hou, C., Bian, H., Liang, W., Si, J., Hou, X.: Maskless fabrication of concave microlens arrays on silica glasses by a femtosecond-laser-enhanced local wet etching method. Opt. Express 18(19), 20334–20343 (2010)
Ding, X., Yasui, Y., Kawaguchi, Y., Niino, H., Yabe, A.: Laser-induced back-side wet etching of fused silica with an aqueous solution containing organic molecules. Appl. Phys. A 75(3), 437–440 (2002)
Djurišić, A., Li, E.: Optical properties of graphite. J. Appl. Phys. 85(10), 7404–7410 (1999)
Endert, H., Pätzel, R., Basting, D.: Excimer laser: a new tool for precision micromachining. Opt. Quant. Electron. 27(12), 1319–1335 (1995)
Guo, R., Xiao, S., Zhai, X., Li, J., Xia, A., Huang, W.: Micro lens fabrication by means of femtosecond two photon photopolymerization. Opt. Express 14(2), 810–816 (2006)
Hanada, Y., Sugioka, K., Gomi, Y., Yamaoka, H., Otsuki, O., Miyamoto, I., Midorikawa, K.: Development of practical system for laser-induced plasma-assisted ablation (LIPAA) for micromachining of glass materials. Appl. Phys. A 79(4–6), 1001–1003 (2004)
Hong, M., Sugioka, K., Lu, Y., Midorikawa, K., Chong, T.: Laser microfabrication of transparent hard materials and signal diagnostics. Appl. Surf. Sci. 186(1), 556–561 (2002)
Hong, M., Sugioka, K., Wu, D.J., Wong, L., Lu, Y., Midorikawa, K., Chong, T.C.: Laser-induced-plasma-assisted ablation for glass microfabrication. In: International Symposium on Photonics and Applications, pp. 138–146. International Society for Optics and Photonics (2001)
Kasztelanic, R., Kujawa, I., Stȩpień, R., Cimek, J., Haraśny, K., Klimczak, M., Waddie, A.J., Taghizadeh, M.R., Buczyński, R.: Fabrication and characterization of microlenses made of tellurite and heavy metal oxide glass developed with hot embossing technology. Opt. Quant. Electron. 46(4), 541–552 (2014)
Kiss, B., Vass, C., Heck, P., Dombi, P., Osvay, K.: Fabrication and analysis of transmission gratings produced by the indirect laser etching technique. J. Phys. D Appl. Phys. 44(41), 415103 (2011)
Kopitkovas, G., Lippert, T., David, C., Wokaun, A., Gobrecht, J.: Fabrication of micro-optical elements in quartz by laser induced backside wet etching. Microelectron. Eng. 67–68, 438–444 (2003)
Kopitkovas, G., Lippert, T., Murazawa, N., David, C., Wokaun, A., Gobrecht, J., Winfield, R.: Laser processing of micro-optical components in quartz. Appl. Surf. Sci. 254(4), 1073–1078 (2007)
Kostyuk, G., Sergeev, M., Zakoldaev, R., Yakovlev, E.: Fast microstructuring of silica glasses surface by NIR laser radiation. Opt. Lasers Eng. 68, 16–24 (2015)
Molotokaitė, E., Gedvilas, M., Račiukaitis, G., Girdauskas, V.: Picosecond laser beam interference ablation of thin metal films on glass substrate. JLMN J. Laser Micro Nanoeng. 5(1), 74–79 (2010)
Nieto, D., Delgado, T., Flores-Arias, M.T.: Fabrication of microchannels on soda-lime glass substrates with a Nd:YVO4 laser. Opt. Lasers Eng. 63, 11–18 (2014)
Psaltis, D., Quake, S., Yang, C.: Developing optofluidic technology through the fusion of microfluidics and optics. Nature 442(7101), 381–386 (2006)
Sergeev, M., Kostyuk, G., Zakoldaev, R., Yakovlev, E.: Laser induced passivation of porous glass to protect it from chemical degradation and aging. Prot. Metals Phys. Chem. Surf. 3, 427–435 (2015)
Smausz, T., Csizmadia, T., Kresz, N., Vass, C., Márton, Z., Hopp, B.: Influence on the laser induced backside dry etching of thickness and material of the absorber, laser spot size and multipulse irradiation. Appl. Surf. Sci. 254(4), 1091–1095 (2007)
Sugioka, K., Obata, K., Hong, M., Wu, D., Wong, L., Lu, Y., Chong, T., Midorikawa, K.: Hybrid laser processing for microfabrication of glass. Appl. Phys. A 77(2), 251–257 (2003)
Veiko, V., Yakovlev, Y.: Physical fundamentals of laser forming of micro-optical components. Opt. Eng. 33(11), 3567–3571 (1994)
Wang, J., Niino, H., Yabe, A.: Micromachining of quartz crystal with excimer lasers by laser-induced backside wet etching. Appl. Phys. A 69(1), S271–S273 (1999a)
Wang, J., Niino, H., Yabe, A.: One-step microfabrication of fused silica by laser ablation of an organic solution. Appl. Phys. A Mater. Sci. Process. 68(1), 111–113 (1999b)
Winfield, R., Bhuian, B., O’Brien, S., Crean, G.: Fabrication of grating structures by simultaneous multi-spot fs laser writing. Appl. Surf. Sci. 253(19), 8086–8090 (2007)
Zakoldaev, R., Sergeev, M., Kostyuk, G., Veiko, V.: Laser-induced black-body heating (LIBBH) as a method for glass surface modification. J. Laser Micro Nanoeng. 10(1), 15–19 (2015)
Zimmermann, M., Schmidt, M.: Combination of a micro-lens multi-spot generator with a galvanometer scanner for flexible parallel micromachining of silicon. SPIE Optical Engineering+Applications. International Society for Optics and Photonics. 81300O (2011)
Acknowledgments
Authors are very grateful to S.D. Vasilkov for help with MOEs research by profilometry. Experimental studies have been supported by the grant from leading universities of the RF (subsidy 074-U01) and the RSF agreement № 14-12-00351.
Author information
Authors and Affiliations
Corresponding author
Additional information
This article is part of the Topical Collection on Laser Technologies and Laser Applications.
Guest Edited by José Figueiredo, José Rodrigues, Nikolai A. Sobolev, Paulo André and Rui Guerra.
Rights and permissions
About this article
Cite this article
Kostyuk, G.K., Zakoldaev, R.A., Sergeev, M.M. et al. Laser-induced glass surface structuring by LIBBH technology. Opt Quant Electron 48, 249 (2016). https://doi.org/10.1007/s11082-016-0531-0
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s11082-016-0531-0