Using spatial econometrics, we estimate the effect of externalities generated by neighbors’ exports on place-level exports, explicitly modeling the distance to those neighbors. We find there is a positive effect of neighbors’ exports on exports to the same country but less so for exporting generally. We also find that using a spatial-weights term based on the physical distance between exporters greatly outperforms a dichotomous measure based on exporters in the same region. The results are robust to alternative definitions of the spatial weight.
This is a preview of subscription content, access via your institution.
Buy single article
Instant access to the full article PDF.
Tax calculation will be finalised during checkout.
Subscribe to journal
Immediate online access to all issues from 2019. Subscription will auto renew annually.
Tax calculation will be finalised during checkout.
Ramos and Moral-Benito (2015) have data with firm locations as we do. They use the Duranton and Overman (2005) statistic for documenting that Spanish exporters are statistically likely to be clustered around foreign destinations, but they have neither an estimate of the causal impact of the export externality directly nor for third countries.
Altuzarra et al. (2016) find evidence for long-lasting durations of export status. They account for this by positing the existence and importance of a market-service fixed cost.
Though we can do the stacking procedure, we cannot do the moments method advocated by LeSage and Pace (2008) because we do not have a closed system: the number of exporting locations is not the same as the number of importing countries in our data.
A third effect is an exports-from-location-to-neighbors-of-country effect. This represents the effect of a firm learning from itself about how to export, which is a different mechanism than the two we consider (internal learning versus activities external to the firm) and is the subject of the “learning to export” literature exemplified by Schmeiser (2012) and Lawless (2013).
We do not have data on domestic sales from either exporters or domestic-only firms. We do not consider this a problem as domestic sales would not affect either information spillovers about foreign markets, economies of scale in international shipping, or overseas competitiveness. Despite our lack of data on domestic sales, it is interesting to question if the export externalities we consider for international sales translate into a domestic sales externality, which given the size of Russia, may be operating at some large physical distance. We are not aware of any reason why our model or methods cannot be extended to this case given detailed data on the location of domestic buyers and sellers.
At the beginning of 2003, Russia was part of a free trade agreement with Georgia, Kyrgyzstan, and Serbia. A free trade agreement with Armenia began in 2003.
Using means instead of medians results in similar relative magnitudes.
Like us, Cassey and Schmeiser (2013) use export weight as an instrument. We assign 0 kg to observations on exports that do not have a corresponding export weight.
These countries are, in order from left to right in the figure, Bosnia & Herzegovina, Ecuador, Jordan, Lebanon, Malta, Peru, Slovenia, and Sudan.
Altuzarra A, Bustillo R, Rodríguez C (2016) Understanding export market success: evidence from manufacturing firms. Open Econ Rev 27(1):161–181
Anderson JE, van Wincoop E (2003) Gravity with gravitas: a solution to the border puzzle. Am Econ Rev 93(1):170–192
Baltagi BH, Egger P, Pfaffermayr M (2007) Estimating models of complex FDI: are there third-country effects? J Econ 140(1):260–281
Bernard AB, Jensen JB (2004) Why some firms export. Rev Econ Stat 86(2):561–569
Blonigen BA, Davies RB, Waddell GR, Naughton HT (2007) FDI in space: spatial autoregressive relationships in Foreign Direct Investment. Eur Econ Rev 51:1303–1325
Blonigen BA, Davies RB, Naughton HT, Waddell GR (2008) Spacey patents: autoregressive patterns in inbound FDI. In: Foreign Direct Investment and the Multinational Enterprise, ed. Steven Brakman and Harry Garretsen Cambridge: MIT Press Chapter 8:173–198
Bode E, Nunnenkamp P, Waldkirch A (2012) Spatial effects of Foreign Direct Investment in US states. Can J Econ 45(1):16–40
Bradshaw M (2008) The geography of Russia’s new political economy. New Political Econ 13(2):193–201
Cassey AJ (2009) State export data: origin of movement vs. origin of production. J Econ Soc Meas 34(4):241–268
Cassey AJ, Schmeiser KN (2013) The agglomeration of exporters by destination. Ann Reg Sci 51(2):495–513
CEPII 2014. www.cepii.fr (accessed February, 2014).
Chaney T (2008) Distorted gravity: the intensive and extensive margins of international trade. Am Econ Rev 98(4):1707–1721
Choquette E, Meinen P (2014) “Export spillovers: openning the black box” World Econ
Coughlin CC (2014) “Determinants of Trade Margins: Inights Using State Export Data” Federal Reserve Bank of St. Louis working paper no. 2014-006 A, https://research.stlouisfed. org/wp/2014/2014–006.pdf (accessed Jan. 26, 2016).
CTEC Publishing LLC (2004) 2006. Russia: All Regions Trade & Investment Guide. 1, 2 edn. CTEC Publishing LLC., Moscow
Duranton G, Overman HG (2005) Testing for localisation using micro-geographic data. Rev Econ Stud 72(4):1077–1106
Eaton J, Eslava M, Jinkins D, Crizan CJ, Kugler M, Tybout JE (2014) “A Search and Learning Model of Export Dynamics” working paper http://grizzly.la.psu.edu/~jtybout/EEJKT_02_26_2014.pdf (accessed Jan. 26, 2016).
Eaton J, Kortum S, Kramarz F (2011) An anatomy of international trade: evidence from French firms. Econometrica 79(5):1453–1498
Ellison G, Glaeser EL (1997) Geographic concentration in U.S. Manufacturing Industries: a dartboard approach. J Polit Econ 105(5):889–927
Feenstra RC (2002) Border effects and the gravity equation: consistent methods for estimation. Scottish J Political Econ 49(5):491–506
Feser EJ (2000) “On the Ellison-Glaeser Geographic Concentration Index” http://works. bepress.com/edwardfeser/28/(accessed Jan. 26, 2016).
Fischer MM, Wang J (2011) Spatial Data Analysis: Models, Methods and Techniques. Springer, Berlin
Gullstrand J, Olofsdotter K, These S (2015). “Importers, Exporters and Multinationals: Exploring the Hierarchy of International Linkages” Open Economies Review pp. 1–20. doi:10.1007/s11079-015-9383-7.
International Monetary Fund 2006 World economic outlook database. Washington, DC. http://www.imf.org/external/pubs/ft/weo/2006/01/data/index.htm (accessed December 15, 2006).
Kelejian H, Tavlas GS, Pavlos P (2012) In the neighborhood: the trade effects of the euro in a spatial framework. Reg Sci Urban Econ 42(1–2):314–322
Kerr WR, Kominers S (2012) “Agglomerative Forces and Cluster Shapes” NBER working paper no. 16639, http://www.people.hbs.edu/wkerr/kerr_kominers_clusters_ 121115.pdf (accessed Jan. 26, 2016).
Koenig P (2009) Agglomeration and the export decisions of French firms. J Urban Econ 66(3):186–195
Koenig P, Mayneris F, Poncet S (2010) Local export spillovers in France. Eur Econ Rev 54(4):622–641
Lawless M (2013) Marginal distance: does export experience reduce firm trade costs? Open Econ Rev 24:819–841
LeSage JP, Thomas-Agnan C (2015) Interpreting spatial econometric origin-destination flow models. J Reg Sci 55(2):188–208
LeSage JP, Fischer MM (2010) Spatial econometric methods for modeling origin-destination flows. In: Manfred M (ed) Handbook of applied spatial analysis. Springer, Fischer and Arthur Getis New York, pp. 409–433
LeSage JP, Pace RK (2008) Spatial econometric modeling of origin-destination flows. J Reg Sci 48(5):941–967
Lovely ME, Rosenthal SS, Sharma S (2005) Information, agglomeration, and the headquarters of U.S. exporters. Reg Sci Urban Econ 35(2):167–191
Melitz MJ (2003) The impact of trade on intra-industry reallocations and aggregate industry productivity. Econometrica 71(6):1695–1725
Moulton BR (1990) An illustration of a pitfall in estimating the effects of aggregate variables on micro units. Rev Econ Stat 72(2):334–338
Nuadé W, Matthee M (2010) The location of manufacturing exporters in Africa: empirical evidence. Afr Dev Rev 22(2):276–291
Ramos R, Moral-Benito E (2015) “Agglomeration Matters for Trade” http://www.robertoramosm.eu/Roberto_Ramos_Files/Agglomeration_Matters_for_Trade.pdf. Accessed 26 Jan 2016.
Santos Silva JMC, Tenreyro S (2006) The log of gravity. Rev Econ Stat 88(4):641–658
Schmeiser KN (2012) Learning to export: export growth and the destination decision of firms. J Int Econ 87(1):89–97
Sellner R, Fischer MM, Koch M (2013) A spatial autoregressive Poisson gravity model. Geogr Anal 45:180–201
Wagner J (2012) Estimating models of complex FDI: are there third-country effects? Open Econ Rev 23(5):747–765
Thanks to three anonymous referees and the editor for excellent comments as well as Ben Cowan, Tim Graciano, Tom Marsh, Yelena Tuzova, and the participants at many departmental seminars and conferences. Cassey thanks Pavan Dhanireddy for research assistance. Cassey acknowledges financial support from Washington State University Agricultural Research Center project # 0540.
Appendix 1: Robustness to Alternative Distance Decay Functions
The spatial weights matrix depends on the distance decay function as that acts to describe how far away a neighbor is economically. Though there is no standard method for determining which distance decay function is most appropriate, the literature does give ideas about what features a distance decay function should have. Kerr and Kominers (2012) provide a micro-founded theory of information exchange on continuous distances that applies directly to the geographic externalities we are considering. They show how distance and information are related in that there should be more weight on neighbors that are geographically closer than those further away. They go on to show that the distance decay should be increasingly large. Two main classes of distance decay functions satisfy those requirements: exponential and inverse decay.
We follow the approach of Bode et al. (2012) and use the exponential decay function e − τd ℓm with τ = 0.020 in our main results. Table 6 and 7 show that our results are not sensitive to varying τ. We vary τ to be 0.015 and 0.025. These seemingly small changes to τ represent economically large differences. For τ = 0.020, 36.8 % of exports located 50 km away contribute to the spatial weight whereas it is 47.2 % for τ = 0.015 and only 28.7 % for τ = 0.025.
The first two columns in Tables 6 and 7 are unaffected since τ is not used in the construction of the simple lag. Going from small to large τ increases the rate of decay. Importantly, we find the specifications with same country and third country spatial lags outperform the simple lag specification regardless of τ, which is our main point. Also importantly, we find that our coefficient estimates on the same country and third country lag are quantitatively similar and qualitatively the same. It is interesting to see, however, that as the rate of decay increases, the coefficient on the log of distance from the export location to the destination better matches the literature by being statistically significant and negative. This is because as the exports of neighbors receive more weight, their influence on the location decision of exports becomes increasingly important over features about the market such as distance away.
Compared to inverse decay d ℓm − η exponential decay caps the weight at one for neighbors in the exact same location whereas the inverse decay function gives unlimited weight. Furthermore, the exponential decay function gives more weight to those neighbors that are relatively close and within 100 or so kilometers, depending on the parameters. Conversely, the inverse decay function greatly discounts the information from neighbors that are close in favor for increased relative weight for the very furthest neighbors. It is for these reasons that we prefer an exponential decay specification. Nonetheless we provide results for three specifications of inverse decay, for η: 1, 2, and 0.5.
The results using an inverse decay function qualitatively match those using an exponential decay function. Our result on the economic and statistical significance of the same country lag term over the third country lag term remains, as does the better performance of specifications with lags compared to those without a lag or the simple lag. We replicate our results from the exponential lag that as distance decay increases and the weight given to neighbors’ actions decreases, the distance from the location to the destination regains its economic and statistical importance.
Results in columns in tables 8, 9 and 10 using different distance decay functions and different estimators show robustness: there is very little variation in the size of the coefficients. The one exception is the third country lag in the Poisson model where it becomes insignificant or significant at the ten percent level. The large standard error, however, indicates this is more of an issue of convergence in a nonlinear model with many fixed effects.
Appendix 2: Poisson Results
We repeat our fixed effects regressions using the Poisson estimator and robust standard errors following the set up of Sellner et al. (2013). Results are shown in Table 11. All spatial lag variables continue to have positive and highly statistically significant coefficients. Our estimated coefficients in Table 11 are attenuated compared to those in Table 2 by about one third. As both the spatial lag of exports to the same and to other destinations attenuate, their relative importance remains about the same.
To interpret the coefficients, as before we multiply the coefficients by the median lags in Table 1. The estimates from specification (5) imply that a 1 % increase in the median of the sum of distance-weighted neighbors exports to the same country causes a 0.093 % increase on own-exports and a 1 % increase in the median of the sum of distance-weighted neighbors exports to third countries causes a 0.002 % increase. Again, the Akaike and Bayesian information criteria favor the specification with both lags included over any other specification. Thus we continue to find support for export externalities to both same country and generally, and in the same relative strength.
About this article
Cite this article
Cassey, A.J., Schmeiser, K.N. & Waldkirch, A. Exporting Spatial Externalities. Open Econ Rev 27, 697–720 (2016). https://doi.org/10.1007/s11079-016-9394-z
- Spatial econometrics