Skip to main content
Log in

Dynamic analysis of the rotor system with elastic ring squeeze film damper considering oil film temperature

  • Original Paper
  • Published:
Nonlinear Dynamics Aims and scope Submit manuscript

Abstract

Elastic ring squeeze film damper (ERSFD) is widely used for vibration and noise control of industrial rotating machinery. However, the oil film temperature has an impact on the ERSFD rotor system under large unbalanced force and speed, which is not considered in the existing ERSFD rotor system research. In this paper, by coupling energy equation with Reynolds equation and viscosity-temperature equation, an ERSFD model considering oil film temperature is established to investigate the oil film force and temperature distribution. Based on this model, an ERSFD combined support rotor considering oil film temperature is modeled by coupling the dynamic equations of the combined support rotor with the ERSFD reaction force. Then, the influence of oil film temperature on the amplitude frequency response curve and the sudden unbalance response curve of the ERSFD rotor is analyzed. The results reveal that lower temperature decreases the vibration amplitude and shortens the transient process. Finally, the established model and some simulation results are validated by the ERSFD rotor test platform.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Fig. 15
Fig. 16
Fig. 17
Fig. 18
Fig. 19
Fig. 20

Similar content being viewed by others

Data availability

Data will be made available on reasonable request.

References

  1. Yang, X.M., Yang, H.S., Cui, Y.C., Li, Y., Jiang, B.Z., Deng, S.E.: Pressure performance for a thin-walled ring and turbulent-jet orifice modeled elastic squeeze film damper. Chine. J. Aeronaut. (2022)

  2. Han, Z.F., Ding, Q., Zhang, W.: Dynamical analysis of an elastic ring squeeze film damper-rotor system. Mech. Mach. Theory. 131, 406–419 (2019)

    Google Scholar 

  3. Zhang, W., Ding, Q.: Elastic ring deformation and pedestal contact status analysis of elastic ring squeeze film damper. J. Sound Vib. 346, 314–327 (2015)

    Google Scholar 

  4. Chen, W.T., Chen, S.Y., Hu, Z.H., Tang, J.Y., Li, H.N.: A novel dynamic model for the spiral bevel gear drive with elastic ring squeeze film dampers. Nonlinear Dyn. 98(2), 1081–1105 (2019)

    Google Scholar 

  5. Sun, W.P., Yan, Z.M., Tan, T., Zhao, D.L., Luo, X.Q.: Nonlinear characterization of the rotor-bearing system with the oil-film and unbalance forces considering the effect of the oil-film temperature. Nonlinear Dyn. 92(3), 1119–1145 (2018)

    Google Scholar 

  6. Li, Y.J., Liang, F., Zhou, Y., Ding, S.T., Du, F.Y., Zhou, M., Bi, J.G., Cai, Y.: Numerical and experimental investigation on thermohydrodynamic performance of turbocharger rotor-bearing system. Appl. Therm. Eng. 121, 27–38 (2017)

    Google Scholar 

  7. Han, Z.F., Ma, Z.S., Zhang, W., Han, B.B., Ding, Q.: Dynamic analysis of an elastic ring squeeze film damper supported rotor using a semi-analytic method. Eng. Appl. Comput. Fluid Mech. 14(1), 1263–1278 (2020)

    Google Scholar 

  8. Wang, Z.L., Liu, Z.S., Zhang, G.H.: Dynamic characteristics of elastic ring squeeze film damper. Ind. Lubric. Tribol. 71(10), 1144–1151 (2019)

    Google Scholar 

  9. Wang, Z.L., Xu, N., Yu, X.Y., Liu, Z.S., Zhang, G.H.: The dynamic characteristic analysis of elastic ring squeeze film damper by fluid-structure interaction approach. Charlotte, NC, USA (2017)

  10. Xu, Y.X., Chen, X., Zou, J.B., Qi, W.J., Li, Y.: Influence of orifice distribution on the characteristics of elastic ring-squeeze film dampers for flywheel energy-storage system. IEEE Trans. Plasma Sci. 41(5), 1272–1279 (2013)

    Google Scholar 

  11. Pang, G.Y., Cao, S.Q., Chen, Y.S., Chen, H.Z.: Study on vibration and bifurcation of an aeroengine rotor system with elastic ring squeeze film damper. Shock. Vib. 2021, 1–15 (2021)

    Google Scholar 

  12. Yang, X.M., Jiang, B.Z., Li, Y., Zhao, Q., Deng, S.E., Zhang, W.H., Cui, Y.C.: Dynamic characteristics of elastic ring squeeze film damper coupled high-speed ball bearings. J. Sound Vib. 537(27), 117186 (2022)

    Google Scholar 

  13. Chauhan, A., Sehgal, R., Sharma, R.K.: Thermohydrodynamic analysis of elliotical journal bearing with different grade oils. Tribol. Int. 43(11), 1970–1977 (2010)

    Google Scholar 

  14. Chauhan, A., Sehgal, R.: Thermal studies of non-circular journal bearing profiles: offset-halves and elliptical. Perform. Eval. Bear. 10, 51261 (2012)

    Google Scholar 

  15. Chauhan, A.: Non-circular Journal Bearings. Springer, Cham (2016)

    Google Scholar 

  16. Shooroki, A.R., Rahmatabadi, A.D., Mehrjardi, M.Z.: Effect of using hybrid nano lubricant on the thermo-hydrodynamic performance of two lobe journal bearings. Proc. Inst. Mech. Eng. J. J. Eng. Tribol. 236(6), 1167–1185 (2022)

    Google Scholar 

  17. Shooroki, A.R., Rahmatabadi, A.D., Mehrjardi, M.Z.: Effects of preload, speed and eccentricity ratio of rotor on the thermohydrodynamic performance of two lobe journal bearings. Amirk. J. Mech. Eng. 49(4), 697–708 (2018)

    Google Scholar 

  18. Zhang, X.Q., Wang, X.L., Liu, R., Wang, B.: Influence of temperature on nonlinear dynamic characteristics of spiral-grooved gas-lubricated thrust bearing-rotor systems for microengine. Tribol. Int. 61, 138–143 (2013)

    Google Scholar 

  19. Du, F.M., Chen, C.D., Zhang, K.G.: Fluid characteristics analysis of the lubricating oil film and the wear experiment investigation of the sliding bearing. Coatings 12(1), 67 (2022)

    Google Scholar 

  20. Huang, P.: Numerical Method for Lubrication. Higher Education Press, Beijing (2012)

    Google Scholar 

  21. Wang, W., Wong, P.L., Zhang, Z.: Partial EHL analysis of rib-roller end contact in tapered roller bearings. Tribol. Int. 29(4), 313–321 (1996)

    Google Scholar 

  22. Wang, W., Cai, S.Z., Wu, C., Wong, P.L.: Vibration suppression evaluation of smart journal bearing using giant magnetostrictive actuators. Key Eng. Mater. 642, 323–327 (2015)

    Google Scholar 

  23. Zhang, Y., Wang, W., Wei, D.G., Wang, G., Xu, J.M., Liu, K.: Dynamic stability of unbalance-induced vibration in a turbocharger rotor-bearing system with the nonlinear effect of thermal turbulent lubricating fluid film. J. Sound Vib. 582(23), 116909 (2022)

    Google Scholar 

  24. Zhang, Y., Wang, W., Wei, D.G., Wang, G., Xu, J.M., Liu, K.: Coupling analysis of tribological and dynamical behavior for a thermal turbulent fluid lubricated floating ring bearing-rotor system at ultra-high speeds. Tribol. Int. 165, 107325 (2022)

    Google Scholar 

  25. Li, Y.Q., Luo, Z., Liu, J.X., Ma, H., Yang, D.S.: Dynamic modeling and stability analysis of a rotor-bearing system with bolted-disk joint. Mech. Syst. Signal Process. 158, 107778 (2021)

    Google Scholar 

  26. Li, Y.Q., Luo, Z., Wang, J.W., Ma, H., Yang, D.S.: Numerical and experimental analysis of the effect of eccentric phase difference in a rotor-bearing system with bolted-disk joint. Nonlinear Dyn. 105(3), 2105–2132 (2021)

    Google Scholar 

  27. Chen, G.: Study on nonlinear dynamic response of an unbalanced rotor supported on ball bearing. J. Vib. Acoust. Trans. Asme. 131(6), 061001 (2009)

    Google Scholar 

  28. Li, L., Luo, Z., He, F.X., Zhe, D., Sun, K.: An improved partial similitude method for dynamic characteristic of rotor systems based on Levenberg-Marquardt method. Mech. Syst. Sig. Process. 165, 108405 (2022)

    Google Scholar 

  29. Luo, Z., Li, L., He, F.X., Yan, X.L.: Partial similitude for dynamic characteristics of rotor systems considering gravitational acceleration. Mech. Mach. Theory. 156, 104142 (2021)

    Google Scholar 

  30. Sun, C.Z., Chen, Y.S., Hou, L.: Steady-state response characteristics of a dual-rotor system induced by rub-impact. Nonlinear Dyn. 86(1), 91–105 (2016)

    Google Scholar 

  31. Ma, H., Li, H., Niu, H.Q., Song, R.Z., Wen, B.C.: Numerical and experimental analysis of the first-and second-mode instability in a rotor-bearing system. Arch. Appl. Mech. 84(4), 519–541 (2014)

    MATH  Google Scholar 

  32. Sun, K., Luo, Z., Li, L., Liu, J.X., Wu, F.Y.: Dynamic analysis of the variable stiffness support rotor system with elastic rings. Nonlinear Dyn. 110(1), 201–217 (2022)

    Google Scholar 

  33. Chen, G.: A new rotor-ball bearing-stator coupling dynamics model for whole aero-engine vibration. J. Vib. Acoust. 131, 061009 (2009)

    Google Scholar 

  34. Luo, Z., Wang, J.W., Tang, R., Wang, D.Y.: Research on vibration performance of the nonlinear combined support-flexible rotor system. Nonlinear Dyn. 98(1), 113–128 (2019)

    MATH  Google Scholar 

  35. Gupta, V., Mittal, M., Mittal, V.: R-peak detection using chaos analysis in standard and real time ECG databases. IRBM. 40(6), 341–354 (2019)

    Google Scholar 

  36. Gupta, V., Mittal, M., Mittal, V.: An efficient low computational cost method of R-peak detection. Wireless Pers. Commun. 118, 359–381 (2021)

    Google Scholar 

  37. Gupta, V., Mittal, M., Mittal, V., Saxena, N.K.: A critical review of feature extraction techniques for ECG signal analysis. J. Inst. Eng. Ser. B. 102, 1049–1060 (2021)

  38. Gupta, V., Mittal, M.: R-peak detection for improved analysis in health informatics. Int. J. Med. Eng. Inform. 13(3), 213–223 (2021)

    Google Scholar 

  39. Gupta, V., Mittal, M., Mittal, V., Saxena, N.K.: BP signal analysis using emerging techniques and its validation using ECG signal. Sens. Imaging. 22(1), 25 (2021)

    Google Scholar 

  40. Hu, L., Liu, Y.B., Teng, W., Zhou, C.: Nonlinear coupled dynamics of a rod fastening rotor under rub-impact and initial permanent deflection. Energies 9(11), 883 (2016)

    Google Scholar 

  41. Dakel, M., Baguet, S., Dufour, R.: Steady-state dynamic behavior of an on-board rotor under combined base motions. J. Vib. Control 20(15), 2254–2287 (2014)

    Google Scholar 

  42. Varney, P., Green, I.: Nonlinear phenomena, bifurcations, and routes to chaos in an asymmetrically supported rotor–stator contact system. J. Sound Vib. 336, 207–226 (2015)

    Google Scholar 

  43. Inayat-Hussain, J.I.: Bifurcations of a flexible rotor response in squeeze-film dampers without centering springs. Chaos Solitons Fractals 24(2), 583–596 (2005)

    MATH  Google Scholar 

  44. Li, B.Q., Ma, H., Yu, X., Zeng, T., Guo, X.M., Wen, B.C.: Nonlinear vibration and dynamic stability analysis of rotor-blade system with nonlinear supports. Arch. Appl. Mech. 89(7), 1375–1402 (2019)

    Google Scholar 

  45. Liu, Y., Xin, X.C., Zhao, Y.L., Ming, S.S., Ma, Y.X., Han, J.Y.: Study on coupling fault dynamics of sliding bearing-rotor system. J. Comput. Nonlinear Dyn. 14(4), 041005 (2019)

    Google Scholar 

  46. Mao, Y.Z., Wang, L.Q., Zhang, C.W.: Study on the load distribution and dynamic characteristics of a thin-walled integrated squirrel-cage supporting roller bearing. Appl. Sci.-Basel. 6(12), 415 (2016)

    Google Scholar 

  47. Chen, Z.B., Liu, S.C., Ruan, J.B., Xia, S.B., Liu, F.J.: Thermal balance analysis of squeeze film damper. J. Aerospa. Power. 11(1), 26–29 (1996)

    Google Scholar 

  48. Jang, J.Y., Chang, C.C.: Adiabatic analysis of finite width journal bearings with non-Newtonian lubricants. Wear 122(1), 63–75 (1988)

    Google Scholar 

  49. Mishra, P.C., Pandey, R.K., Athre, K.: Temperature profile of an elliptic bore journal bearing. Tribol. Int. 40(3), 453–458 (2007)

    Google Scholar 

  50. Li, L., Luo, Z., He, F.X., Ding, Z., Sun, K.: A partial similitude method for vibration responses of rotor systems: numerical and experimental verification. Int. J. Mech. Sci. 208, 106696 (2021)

    Google Scholar 

  51. Yang, X.D., Zhang, W., Chen, L.Q., Yao, M.H.: Dynamical analysis of axially moving plate by finite difference method. Nonlinear Dyn. 67(2), 997–1006 (2012)

    MathSciNet  MATH  Google Scholar 

  52. Fu, C.G.: Aeroengine Manual, vol. 19. Aviation Industry Press, Beijing (2000)

    Google Scholar 

  53. Ehrich, F.F.: Handbook of Rotor Dynamics. McGraw-Hill, New York (1992)

    Google Scholar 

  54. Mohammad, D.R.A., Khan, N.U., Ramamurti, V.: On the role of Rayleigh damping. J. Sound Vib. 185(2), 207–218 (1995)

    Google Scholar 

  55. Liu, M., Gorman, D.G.: Formulation of Rayleigh damping and its extensions. Comput. Struct. 57(2), 277–285 (1995)

    MATH  Google Scholar 

  56. Ma, X.X., Ma, H., Qin, H.Q., Guo, X.M., Zhao, C.G., Yu, M.Y.: Nonlinear vibration response characteristics of a dual-rotor-bearing system with squeeze film damper. Chin. J. Aeronaut. 30(10), 128–147 (2021)

    Google Scholar 

  57. Harris, T.A., Kotzalas, M.N.: Advanced Concepts of Bearing Technology: Rolling Bearing Analysis. CRC Press, Boca Raton (2007)

    Google Scholar 

  58. Chen, G.: Vibration modelling and verifications for whole aero-engine. J. Sound Vib. 349, 163–176 (2015)

    Google Scholar 

  59. Chen, G., Qu, M.J.: Modeling and analysis of fit clearance between rolling bearing outer ring and housing. J. Sound Vib. 438, 419–440 (2019)

    Google Scholar 

  60. Wang, D., Zhang, W.H., Wang, Z.P., Zhu, J.H.: Shape optimization of 3D curved slots and its application to the squirrel-cage elastic support design. Sci. China. Phys. Mech. Astron. 53(10), 1895–1900 (2010)

    Google Scholar 

  61. Mao, Y.Z., Wang, L.Q., Zhang, C.W.: Study on the load distribution and dynamic characteristics of a thin-walled integrated squirrel-cage supporting roller bearing. Appl. Sci. 6(12), 415 (2016)

    Google Scholar 

  62. Zhang, W., Han, B.B., Li, X., Sun, J.Q., Ding, Q.: Multiple-objective design optimization of squirrel cage for squeeze film damper by using cell mapping method and experimental validation. Mech. Mach. Theory. 132, 66–79 (2019)

    Google Scholar 

  63. Tang, R., Guo, J., Luo, Z., Wang, D.Y., Liu, Y.Q.: Optimal design method of squirrel cage elastic support by stages. Aeroengine. 42(2), 38–43 (2016)

    Google Scholar 

  64. Gupta, V., Mittal, M., Mittal, V., Gupta, A.: An efficient AR modelling-based electrocardiogram signal analysis for health informatics. Int. J. Med. Eng. Inform. 14(1), 74–89 (2021)

    Google Scholar 

  65. Gupta, V., Mittal, M., Mittal, V., Sharma, A.K., Saxena, N.K.: A novel feature extraction-based ECG signal analysis. J. Inst. Eng. Ser. B. 102, 903–913 (2021)

    Google Scholar 

  66. Gupta, V., Mittal, M., Mittal, V., Gupta, A.: ECG signal analysis using CWT, spectrogram and autoregressive technique. Iran J. Comput. Sci. 4, 265–280 (2021)

    Google Scholar 

Download references

Funding

This work was supported by the National Science Foundation of China [Grant Numbers 12272089, 11872148, U1908217]. The Basic and Applied Basic Research Fund of Guangdong Province [Grant Numbers 2020B1515120015].

Author information

Authors and Affiliations

Authors

Contributions

ZL: Formal analysis, Methodology, Supervision, KS: Writing, Software, Validation, GZ: Software, Visualization, ZC: Data Curation, LL: Investigation.

Corresponding author

Correspondence to Zhong Luo.

Ethics declarations

Conflict of interest

The author(s) declare no potential conflicts of interest with respect to the research, authorship/contribution and publication of this original paper.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Luo, Z., Sun, K., Ge, X. et al. Dynamic analysis of the rotor system with elastic ring squeeze film damper considering oil film temperature. Nonlinear Dyn 111, 15981–16002 (2023). https://doi.org/10.1007/s11071-023-08715-0

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11071-023-08715-0

Keywords

Navigation