Abstract
In this paper, the residual vibration control problem of a nuclear power plant’s fuel-transport system is discussed. The purpose of the system is to transport fuel rods to the target position within the minimum time. But according to observations, the rods oscillate at the end of the maneuver, causing an undesirable delay in the operation and affecting the system’s performance in terms both of productivity and of safety. In the present study, a mathematical model of the system was developed to simulate the under-water sway response of the rod while keeping in view the effects of the hydrodynamic forces imposed by the surrounding water. Experiments were performed to validate the model’s correctness. Further, simulation results were used to design the input shaping control that generates shaped velocity commands for transport of the fuel rods to the target position with the minimum residual vibration. It was observed that due to the under-water maneuvering, the fuel-handling system behaves as a highly damped process and that the generated shaped velocity commands fail to effect the desired suppression of the residual vibration. Therefore, keeping in view the highly damped nature of the system, a modified shaped command was generated that transported the fuel rods to the target position with the minimum residual vibration.
Similar content being viewed by others
References
Lee, S.S., Kim, S.H., Suh, K.Y.: The design features of the advanced power reactor 1400. Nucl. Eng. Technol. 41(8), 995–1004 (2009)
Hong, K.-S., Bentsman, J.: Direct adaptive control of parabolic systems: algorithm synthesis, and convergence and stability analysis. IEEE Trans. Autom. Control 39(10), 2018–2033 (1994)
He, W., Ge, S.S., How, B.V.E., Choo, Y.S., Hong, K.-S.: Robust adaptive boundary control of a flexible marine riser with vessel dynamics. Automatica 47(4), 722–732 (2011)
Ngo, Q.H., Hong, K.-S.: Adaptive sliding mode control of container cranes. IET Control Theory Appl. 6(5), 662–668 (2012)
Hong, K.-S.: An open-loop control for underactuated manipulators using oscillatory inputs: steering capability of an unactuated joint. IEEE Trans. Control Syst. Technol. 10(3), 469–480 (2002)
Rehan, M., Hong, K.-S.: Decoupled-architecture-based nonlinear anti-windup design for a class of nonlinear systems. Nonlinear Dyn. 73(3), 1955–1967 (2013)
El-Ganaini, W.A., Saeed, N.A., Eissa, M.: Positive position feedback (PPF) controller for suppression of nonlinear system vibration. Nonlinear Dyn. 72(3), 517–537 (2013)
Ngo, Q.H., Hong, K.-S.: Sliding-mode antisway control of an offshore container crane. IEEE/ASME Trans. Mechatron. 7(2), 201–209 (2012)
He, W., Zhang, S., Ge, S.S.: Boundary control of a flexible riser with the application to marine installation. IEEE Trans. Ind. Electron. 60(12), 5802–5810 (2013)
Sagirli, A., Azeloglu, C.O., Guclu, R., Yazici, H.: Self-tuning fuzzy logic control of crane structures against earthquake induced vibration. Nonlinear Dyn. 64(4), 375–384 (2011)
Azeloglu, C.O., Sagirli, A., Edincliler, A.: Mathematical modelling of the container cranes under seismic loading and proving by shake table. Nonlinear Dyn. 73(1–2), 143–154 (2013)
Abdel-Rahman, E.M., Nayfeh, A.H., Masoud, Z.N.: Dynamics and control of cranes: a review. J. Vib. Control 9(7), 863–908 (2003)
Fortgang, J., Singhose, W.: Concurrent design of vibration absorbers and input shapers. J. Dyn. Syst. Meas. Control 127, 329–335 (2005)
Smith, O.J.M.: Feedback Control Systems. McGraw-Hill, New York (1958)
Singer, N.C.: Residual vibration reduction in computer controlled machines. Ph.D. thesis and MIT Artificial Intelligence Laboratory Technical Report No. 1030. Massachusetts Institute of Technology. Cambridge, MA (1990).
Singer, N.C., Seering, W.P.: Preshaping command inputs to reduce system vibration. J. Dyn. Syst. Meas. Control 112, 76–82 (1990)
Singhose, W., Seering, W., Singer, N.: Residual vibration reduction using vector diagrams to generate shaped inputs. J. Dyn. Syst. Meas. Control 116, 654–659 (1994)
Park, U.H., Lee, J.W., Lim, B.D., Sung, Y.G.: Design and sensitivity analysis of an input shaping filter in the Z-plane. J. Sound Vib. 243(1), 157–171 (2001)
Singhose, W., Kim, D., Kenison, M.: Input shaping control of double pendulum bridge crane oscillations. J. Dyn. Syst. Meas. Control 130(3), 034504 (2008)
Singhose, W., Vaughan, J.: Reducing vibration by digital filtering and input shaping. IEEE Trans. Control Syst. Technol. 19(6), 1410–1420 (2011)
Singhose, W., Bohlke, K., Seering, W.: Fuel-efficient pulse command profiles for flexible spacecraft. J. Guid. Control Dyn. 19(4), 954–960 (1996)
Singhose, W.: Command shaping for flexible systems: a review of the first 50 years. Int. J. Precis. Eng. Manuf. 10(4), 153–168 (2009)
Daqaq, M.F., Reddy, C.K., Nayfeh, A.H.: Input-shaping control of nonlinear MEMS. Nonlinear Dyn. 54(1–2), 167–179 (2008)
Singhose, W., Porter, L., Kenison, M., Kriikku, E.: Effects of hoisting on the input shaping control of gantry cranes. Control Eng. Pract. 8(10), 1159–1165 (2000)
Hong, K.-S., Park, B.J., Lee, M.H.: Two-stage control for container cranes. JSME Int. J. Ser. C 43(2), 273–282 (2000)
Hong, K.T., Huh, C.D., Hong, K.-S.: Command shaping control for limiting the transient sway angle of crane systems. Int. J. Control Autom. Syst. 1(1), 43–53 (2003)
Blackburn, D., Singhose, W., Kitchen, J., Patrangenaru, P., Lawrence, J., Kamoi, T., Taura, A.: Command shaping for nonlinear crane dynamics. J. Vib. Control 16(4), 477–501 (2010)
Daqaq, M.F., Masoud, Z.N.: Nonlinear input-shaping controller for quay-side container cranes. Nonlinear Dyn. 45(1–2), 149–170 (2006)
Bhatta, D.D.: Computation of added mass and damping coefficients due to a heaving cylinder. J. Appl. Math. Comput. 23(1–2), 127–140 (2007)
Troesch, A.W., Kim, S.K.: Hydrodynamic forces acting on cylinders oscillating at small amplitudes. J. Fluids Struct. 5(1), 113–126 (1991)
Rahman, M., Bhatta, D.D.: Evaluation of added mass and damping coefficient of an oscillating circular cylinder. Appl. Math. Model. 17(2), 70–79 (1993)
McLain, T.W., Rock, S.M.: Development and experimental validation of an underwater manipulator hydrodynamic model. Int. J. Robot. Res. 17(7), 748–759 (1998)
Wang, L., Dai, H.L., Han, Y.Y.: Cross-flow-induced instability and nonlinear dynamics of cylinder arrays with consideration of initial axial load. Nonlinear Dyn. 67(2), 1043–1051 (2012)
Lin, C.-C., Chen, R.-R., Li, T.-L.: Experimental determination of the hydrodynamic coefficients of an underwater manipulator. J. Robot. Syst. 16(6), 329–338 (1999)
Munson, B.R., Young, D.F., Okiishi, T.H.: Fundamentals of Fluid Mechanics. Wiley, New York (2002)
Acknowledgments
This research was supported by a grant from the Advanced Technology Center (ATC) Program funded by the Korean Ministry of Trade, Industry & Energy.
Author information
Authors and Affiliations
Corresponding author
Electronic supplementary material
Below is the link to the electronic supplementary material.
Supplementary material 1 (mpg 686 KB)
Rights and permissions
About this article
Cite this article
Shah, U.H., Hong, K.S. Input shaping control of a nuclear power plant’s fuel transport system. Nonlinear Dyn 77, 1737–1748 (2014). https://doi.org/10.1007/s11071-014-1414-1
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11071-014-1414-1