Abstract
Advanced chemical and mineralogical techniques are necessary to further our understanding of ore deposits and their genesis. Using X-ray micro-computed tomography (µCT) and an automated mineralogy (AM) system based on scanning electron microscopy with an energy-dispersive X-ray spectrometer (SEM–EDX), we investigated the internal mineralogy of Sn–Nb–Ta pegmatites. This paper presents a comprehensive methodology to quantify and visualize the mineral relationships of ore samples in three-dimensional space at the microscopic scale. A list of all possible minerals present, a so-called mineral library, was deduced with a SEM-based AM system and served as the ground truth for the interpretation of µCT data. A reconstructed attenuation coefficient (µrec) was calculated for mineral phases that have been identified and provided a most correct guidance to differentiate between minerals for a given experimental µCT setup. Despite some limitation in sample size and mineral identification, these complementary techniques enabled the differentiation of a Fe–Li mica from biotite based on the chemical attribution of lithium to µrec. Using statistical descriptors, we quantified the general orientation of individual mineral phases and their spatial correlation to comply with the needs of processing large datasets at a low computational expense. Applying this comprehensive methodology to a case study demonstrates the possibilities of combining a SEM-based AM system with µCT analysis to investigate ore samples at the microscopic scale.
Similar content being viewed by others
Availability of Data and Materials
The datasets and code generated during and/or analyzed during the current study are available from the corresponding author on reasonable request.
References
Ali, S. H., Giurco, D., Arndt, N., Nickless, E., Brown, G., Demetriades, A., Durrheim, R., Enriquez, M. A., Kinnaird, J., Littleboy, A., Meinert, L. D., Oberhänsli, R., Salem, J., Schodde, R., Schneider, G., Vidal, O., & Yakovleva, N. (2017). Mineral supply for sustainable development requires resource governance. Nature, 543, 367–372.
Anthony, J. W., Bideaux, R. A., Bladh, K. W., & Nichols M. C. (eds.), (2001). Handbook of mineralogy. Mineralogical Society of America. http://www.handbookofmineralogy.org/
Arganda-Carreras, I. (2018). Weka Segmentation tiling script. Scientific Community Image Forum. https://forum.image.sc/t/trainable-wekaerror-large-images/10929
Arganda-Carreras, I., Kaynig, V., Rueden, C., Eliceiri, K. W., Schindelin, J., Cardona, A., & Sebastian Sueng, H. (2017). Trainable Weka Segmentation: A machine learning tool for microscopy pixel classification. Bioinformatics, 33(15), 2424–2426.
Artioli, G. (2018). X-ray diffraction, studies of inorganic compounds and minerals. Encyclopedia of Spectroscopy and Spectrometry, 3, 676–683.
Bam, L. C., Miller, J. A., & Becker, M. (2020). A mineral X-ray linear attenuation coefficient tool (MXLAC) to assess mineralogical differentiation for X-ray computed tomography scanning. Minerals, 10, 441.
Becker, M., Jardine, M. A., Miller, J. A., & Harris, M. (2016). X-ray computed tomography—A geometallurgical tool for 3D textural analysis of drill core? In S. Dominy & L. O’Connor (Eds.), The third AusIMM international geometallurgy conference 2016 (pp. 231–240). AusIMM.
Callow, B., Falcon-Suarez, I., Moreno-Marin, H., Bull, J. M., & Ahmed, S. (2020). Optimal X-ray micro-CT image based methods for porosity and permeability quantification in heterogeneous sandstones. Geophysical Journal International, 223(2), 1210–1229.
Chantler, C. T., Olsen, K., Dragoset, R. A., Chang, J., Kishore, A. R., Kotochigova, S. A., & Zucker, D. S. (2005). X-ray form factor, attenuation and scattering tables (version 2.1). National Institute of Standards and Technology.
Cnudde, V., & Boone, M. N. (2013). High-resolution X-ray computed tomography in geosciences: A review of the current technology and applications. Earth-Science Reviews, 123, 1–17.
De Boever, W., Derluyn, H., Van Loo, D., Van Hoorebeke, L., & Cnudde, V. (2015). Data-fusion of high resolution X-ray CT, SEM and EDS for 3D and pseudo-3D chemical and structural characterization of sandstone. Micron, 74, 15–21.
De Witte, Y. (2010). Improved and Practically Feasible Reconstruction Methods for High Resolution X-ray Tomography. (Doctoral dissertation, Ghent University, Ghent). Retrieved from http://lib.ugent.be/catalog/rug01:001404410
Dewaele, S., Henjes-Kunst, F., Melcher, F., Sitnikova, M., Burgess, R., Gerdes, A., Fernandez, M. A., De Clercq, F., Muchez, P., & Lehmann, B. (2011). Late Neoproterozoic overprinting of the cassiterite and columbite-tantalite bearing pegmatites of the Gatumba area, Rwanda (Central Africa). Journal of African Earth Sciences, 61(1), 10–26.
Dhaene, J., Pauwels, E., De Schryver, T., De Muynck, A., Dierick, M., & Van Hoorebeke, L. (2015). A realistic projection simulator for laboratory based X-ray micro-CT. Nuclear Instruments and Methods in Physics Research B, 342, 170–178.
Dill, H. G. (2010). The “chessboard” classification scheme of mineral deposits: Mineralogy and geology from aluminum to zirconium. Earth-Science Reviews, 100, 1–420.
Evsevleev, S., Paciornik, S., & Bruno, G. (2020). Advanced deep learning-based 3D microstructures characterization of multiphase metal matrix composites. Advanced Engineering Materials, 22, 1901197.
Furat, O., Wang, M., Neumann, M., Petrich, L., Weber, M., Krill, C. E., III., & Schmidt, V. (2019). Machine learning techniques for the segmentation of tomographic image data of functional materials. Frontiers in Materials, 6, 145.
Gessner, K., Blenkinsop, T., & Sorjonen-Ward, P. (2018). Characterization of ore-forming systems—Advances and challenges. In K. Gessner, T. G. Blenkinsop, & P. Sorjonen-Ward (Eds.), Geological Society, London, Special Publications (Vol. 453, pp. 1–6). Geological Society of London.
Gibson, B., Nwaila, G., & Petersen, J. (2021). Characterization of a coarse synthetic silver ore as a model ore material for heap leaching research. Minerals Engineering, 174, 107253.
Godel, B. (2013). High-resolution X-ray computed tomography and its application to ore deposits: From data acquisition to quantitative three-dimensional measurements with case studies from Ni–Cu-PGE deposits. Economic Geology, 108(8), 2005–2019.
Graham, S. D. (2017). Automated mineralogy—The past, present and future. In F. Kongoli, D. Bradshaw, K. Waters, J. Starkey, & A. C. Silva (Eds.), Sustainable Industrial Processing Summit SIPS 2017 (Vol. 4, pp. 96–115). Flogen Star Outreach.
Gu, L., Wang, N., Tang, X., & Changela, H. G. (2020). Application of FIB-SEM techniques for the advanced characterization of earth and planetary materials. Scanning, 2020, 8406917.
Guntoro, P. I., Ghorbani, Y., Koch, P.-H., & Rosenkranz, J. (2019a). X-ray microcomputed tomography (μCT) for mineral characterization: A review of data analysis methods. Minerals, 9(3), 183.
Guntoro, P. I., Tiu, G., Ghorbani, Y., Lund, C., & Rosenkranz, J. (2019b). Application of machine learning techniques in mineral phase segmentation for X-ray microcomputed tomography (µCT) data. Minerals Engineering, 142, 105882.
Hayes, S. M., & McCullough, E. A. (2018). Critical minerals: A review of elemental trends in comprehensive criticality studies. Resources Policy, 59, 192–199.
Holzner, C., Lavery, L., Bale, H., Merkle, A., McDonald, S., Withers, P., Zhang, Y., Juul Jensen, D., Kimura, M., Lyckegaard, A., Reischig, P., & Lauridsen, E. M. (2016). Diffraction contrast tomography in the laboratory applications and future directions. Microscopy Today, 24(4), 34–43.
Hrstka, T., Gottlieb, P., Skála, R., Breiter, K., & Motl, D. (2018). Automated mineralogy and petrology—Applications of TESCAN Integrated Mineral Analyzer (TIMA). Journal of Geosciences, 63, 47–63.
Hulsbosch, N., Hertogen, J., Dewaele, S., Andre, L., & Muchez, P. (2013). Petrographic and mineralogical characterisation of fractionated pegmatites culminating in the Nb–Ta–Sn pegmatites of the Gatumba area (western Rwanda). Geologica Belgica, 16(1–2), 105–117.
Hulsbosch, N., & Muchez, P. (2020). Tracing fluid saturation during pegmatite differentiation by studying the fluid inclusion evolution and multiphase cassiterite mineralization of the Gatumba pegmatite dyke system (NW Rwanda). Lithos, 354–355, 105285.
Jardine, M. A., Miller, J. A., & Becker, M. (2018). Coupled X-ray computed tomography and grey level co-occurrence matrices as a method for quantification of mineralogy and texture in 3D. Computers and Geosciences, 111, 105–117.
Kazhdan, M., Lillaney, K., Roncal, W., Bock, D., Vogelstein, J., & Burns, R. (2015). Gradient-domain fusion for color correction in large EM image stacks.
Ketcham, R. A., & Mote, A. S. (2019). Accurate measurement of small features in X-ray CT data volumes, demonstrated using gold grains. Journal of Geophysical Research: Solid Earth, 124, 3508–3529.
Keulen, N., Malkki, S. N., & Graham, S. (2020). Automated quantitative mineralogy applied to metamorphic rocks. Minerals, 10, 47.
Kyle, J. R., & Ketcham, R. A. (2015). Application of high resolution X-ray computed tomography to mineral deposit origin, evaluation, and processing. Ore Geology Reviews, 65(4), 821–839.
Laforce, B., Vermeulen, B., Garrevoet, J., Vekemans, B., Van Hoorebeke, L., Janssen, C., & Vincze, L. (2016). Laboratory scale X-ray fluorescence tomography: Instrument characterization and application in earth and environmental science. Analytical Chemistry, 88(6), 3386–3391.
Lehmann, B., Halder, S., Ruzindana Munana, J., Ngizimana, J., & Biryabarema, M. (2014). The geochemical signature of rare-metal pegmatites in Central Africa: Magmatic rocks in the Gatumba tin-tantalum mining district, Rwanda. Journal of Geochemical Exploration, 144, 528–538.
Lehmann, B., Melcher, F., Sitnikova, M. A., & Ruzindana, M. J. (2008). The Gatumba rare-metal pegmatites: Chemical signature and environmental impact. Études Rwandaises, 16, 25–40.
Lobos, R., Silva, J. F., Ortiz, J. M., Díaz, G., & Egaña, A. (2016). Analysis and classification of natural rock textures based on new transform-based features. Mathematical Geosciences, 48(7), 835–870.
Masschaele, B., Dierick, M., Van Loo, D., Boone, M. N., Brabant, L., Pauwels, E., Cnudde, V., & Van Hoorebeke, L. (2013). HECTOR: A 240 kV micro-CT setup optimized for research. Journal of Physics: Conference Series, 463, 012012.
Melcher, F., Graupner, T., Gäbler, H.-E., Sitnikova, M., Henjes-Kunst, F., Oberthür, T., Gerdes, A., & Dewaele, S. (2015). Tantalum-(niobium-tin) mineralisation in African pegmatites and rare metal granites: Constraints from Ta–Nb oxide mineralogy, geochemistry and U-Pb geochronology. Ore Geology Reviews, 64, 667–719.
Otsu, N. (1979). A threshold selection method from gray-level histograms. IEEE Transactions on Systems, Man and Cybernetics, 9(1), 62–66.
Pearce, M. A., Godel, B. M., Fisher, L. A., Schoneveld, L. E., Cleverley, J. S., Oliver, N. H. S., & Nugus, M. (2018). Microscale data to macroscale processes: A review of microcharacterization applied to mineral systems. In K. Gessner, T. G. Blenkinsop, & P. Sorjonen-Ward (Eds.), Geological Society, London, Special Publications (Vol. 453, pp. 7–39). Geological Society of London.
Reed, S. J. B. (2005). Electron microprobe analysis and scanning electron microscopy in geology (2nd ed.). Cambridge University Press.
Reuter, M. A., van Schaik, A., Gutzmer, J., Bartie, N., & Abadías-Llamas, A. (2019). Challenges of the circular economy: A material, metallurgical, and product design perspective. Annual Review of Materials Research, 49, 253–274.
Reyes, F., Lin, Q., Udoudo, O., Dodds, C., Lee, P. D., & Neethling, S. (2017). Calibrated X-ray microtomography for mineral ore quantification. Minerals Engineering, 110, 122–130.
Schindelin, J., Arganda Carreras, I., Frise, E., Kaynig, V., Longair, M., Pietzsch, T., Preibisch, S., Rueden, C., Saalfeld, S., Schmid, B., Tinevez, J.-Y., White, D. J., Hartenstein, V., Eliceiri, K., Tomancak, P., & Cardona, A. (2012). Fiji: An open-source platform for biological-image analysis. Nature Methods, 9, 676–682.
Shannon, J. R., Walker, B. M., Carten, R. B., & Geraghty, E. P. (1982). Unidirectional solidification textures and their significance in determining relative ages of intrusions at the Henderson Mine, Colorado. Geology, 10(6), 293–297.
Strzelecki, P. J., Świerczewska, A., Kopczewska, K., Fheed, A., Tarasiuk, J., & Wroński, S. (2021). Decoding rocks: An assessment of geomaterial microstructure using X-ray microtomography, image analysis and multivariate statistics. Materials, 14, 3266.
Vlassenbroeck, J., Dierick, M., Masschaele, B., Cnudde, V., Van Hoorebeke, L., & Jacobs, P. (2007). Software tools for quantification of X-ray microtomography at the UGCT. Nuclear Instruments and Methods in Physics Research A, 580(1), 442–445.
Wang, Y., & Miller, J. D. (2020). Current developments and applications of micro-CT for the 3D analysis of multiphase mineral systems in geometallurgy. Earth-Science Reviews, 211, 103406.
Warlo, M., Bark, G., Wanhainen, C., Butcher, A. R., Forsberg, F., Lycksam, H., & Kuva, J. (2021). Multi-scale X-ray computed tomography analysis to aid automated mineralogy in ore geology research. Frontiers in Earth Science, 9, 789372.
Warlo, M., Wanhainen, C., Bark, G., Butcher, A. R., McElroy, I., Brising, D., & Rollinson, G. K. (2019). Automated quantitative mineralogy optimized for simultaneous detection of (precious/critical) rare metals and base metals in a production-focused environment. Minerals, 9, 440.
Wellmer, F.-W., Buchholz, P., Gutzmer, J., Hagelüken, C., Herzig, P., Littke, R., & Thauer, R. K. (2019). Raw materials for future energy supply. Springer.
Acknowledgments
This work is funded by the European Electron and X-ray Imaging Infrastructure (EXCITE), this project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 101005611. SEM instrumentation has received funding from Research Foundation – Flanders (FWO) for medium-scale research infrastructure under grant agreement number I013118N.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of Interest
The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Buyse, F., Dewaele, S., Boone, M.N. et al. Combining Automated Mineralogy with X-ray Computed Tomography for Internal Characterization of Ore Samples at the Microscopic Scale. Nat Resour Res 32, 461–478 (2023). https://doi.org/10.1007/s11053-023-10161-z
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11053-023-10161-z