Abstract
Bituminous coal in the Xutuan Coal Mine of the Huaibei Mining Bureau (China) is the research object of this study. The influence of moisture content on the porosity of the bituminous coal was investigated from a microscopic perspective by using a high-solution 3D X-ray micro-analyzer. The threshold segmentation method was used to segment the scanning slices of the coal samples. The threshold values of the various media were in the following order (from large to small): minerals, water, matrices, and fractures. The scanning volume and actual volume proportions of the different media in the coal samples with different moisture contents were calculated. The accuracy of the computerized tomography (CT) scanning method in measuring the coal moisture content was verified by comparison with the results obtained using the weighing method. 3D reconstructed coal samples, with different moisture contents, were analyzed, as well as separately reconstructed fractures and water in the coal samples with different moisture contents. The heterogeneity and anisotropy of the coal mass were explained quantitatively by the CT scanning intensity. A commonly used fracture classification method indicated that the primary fracture in the coal sample was a type A fracture. The results of the analysis of water in the coal fracture indicated that the porosity of bituminous coal decreased with the increase in moisture content in conditions of atmospheric pressure and a short immersion period. However, a certain level of porosity remained evident, and the degree of fracture development of the coal samples remained unchanged. This is attributed to the minor volumetric change in the minerals in the coal samples, as the water does not completely occupy the fractures in the coal samples, and the dissolution of the minerals by water is therefore not significant. The reasons for the moisture content affecting gas adsorption, seepage, and strength of a coal body were analyzed from a microscopic perspective. In addition, the types of fractures and water in the coal samples were classified by employing statistics and analyses of volume, surface area, specific surface area, and aspect ratio of the fractures and the water in the coal samples with different moisture contents.
Similar content being viewed by others
References
American Association of Petroleum Geologists, Energy Minerals Division. (2018). Unconventional energy resources: 2017 review. Natural Resources Research. https://doi.org/10.1007/s11053-018-9432-1.
Bai, Q. S., & Tu, S. H. (2016). Failure analysis of a large span longwall drift under water-rich roofs and its control techniques. Engineering Failure Analysis,67, 15–32.
Cai, Y., Liu, D., Mathews, J. P., Pan, Z., Elsworth, D., Yao, Y., et al. (2014). Permeability evolution in fractured coa—Combining triaxial confinement with X-ray computed tomography, acoustic emission and ultrasonic techniques. International Journal of Coal Geology,122, 91–104.
Chen, Y., Tang, D., Xu, H., Tao, S., Li, S., Yang, G., et al. (2015). Pore and fracture characteristics of different rank coals in the eastern margin of the Ordos Basin, China. Journal of Natural Gas Science & Engineering,26, 1264–1277.
Feng, Z., Zhou, D., Zhao, Y., & Cai, T. (2016). Study on microstructural changes of coal after methane adsorption. Journal of Natural Gas Science and Engineering,30(5), 28–37.
Guo, X., Yan, Q., & Wang, A. (2019). Evaluation of relative permeability in coalbed methane reservoirs based on production data: A case study in Qinshui Basin, China. Natural Resources Research,28(1), 187–198.
Hao, D., Zhang, L., Li, M., Tu, S., Zhang, C., Bai, Q., et al. (2018a). Experimental study of the moisture content influence on CH4 adsorption and deformation characteristics of cylindrical bituminous coal core. Adsorption Science & Technology,36(7–8), 1512–1537.
Hao, D., Zhang, L., Ye, Z., Tu, S., & Zhang, C. (2018b). Experimental study on the effects of the moisture content of bituminous coal on its gas seepage characteristics. Arabian Journal of Geosciences,11(15), 436.
Heriawan, M. N., & Koike, K. (2015). Coal quality related to microfractures identified by CT image analysis. International Journal of Coal Geology,140, 97–110.
Karacan, C. Ö., & Mitchell, G. D. (2003). Behavior and effect of different coal microlithotypes during gas transport for carbon dioxide sequestration into coal seams. International Journal of Coal Geology,53(4), 201–217.
Li, X., Duan, Y., Li, S., & Zhou, R. (2017). Study on the progressive failure characteristics of Longmaxi shale under uniaxial compression conditions by X-ray micro-computed tomography. Energies,10(3), 303.
Li, H., Ogawa, Y., & Shimada, S. (2003). Mechanism of methane flow through sheared coals and its role on methane recovery. Fuel,82(10), 1271–1279.
Li, S., Tang, D., Xu, H., & Yang, Z. (2012). Advanced characterization of physical properties of coals with different coal structures by nuclear magnetic resonance and X-ray computed tomography. Computers & Geosciences,48(48), 220–227.
Ni, X., Miao, J., Lv, R., & Lin, X. (2017). Quantitative 3D spatial characterization and flow simulation of coal macropores based on μCT technology. Fuel,200, 199–207.
Okolo, G. N., Everson, R. C., Neomagus, H. W., Roberts, M. J., & Sakurovs, R. (2015). Comparing the porosity and surface areas of coal as measured by gas adsorption, mercury intrusion and SAXS techniques. Fuel,141, 293–304.
Pan, Z., & Connell, L. (2012). Modelling permeability for coal reservoirs: A review of analytical models and testing data. International Journal of Coal Geology,92, 1–44.
Pan, Z., Connell, L. D., Camilleri, M., & Connelly, L. (2010). Effects of matrix moisture on gas diffusion and flow in coal. Fuel,89(11), 3207–3217.
Pan, J., Niu, Q., Wang, K., Shi, X., & Li, M. (2016). The closed pores of tectonically deformed coal studied by small-angle X-ray scattering and liquid nitrogen adsorption. Microporous and Mesoporous Materials,224, 245–252.
Shi, X., Pan, J., Hou, Q., Jin, Y., Wang, Z., Niu, Q., et al. (2018). Micrometer-scale fractures in coal related to coal rank based on micro-CT scanning and fractal theory. Fuel,212, 162–172.
Simons, F. J., Verhelst, F., & Swennen, R. (1997). Quantitative characterization of coal by means of microfocal X-ray computed microtomography (CMT) and color image analysis (CIA). International Journal of Coal Geology,34(1–2), 69–88.
Teng, T., Gao, F., Ju, Y., & Xue, Y. (2017). How moisture loss affects coal porosity and permeability during gas recovery in wet reservoirs? International Journal of Mining Science & Technology,27(6), 899–906.
Van Geet, M., & Swennen, R. (2001). Quantitative 3D-fracture analysis by means of microfocus X-ray computer tomography (µCT): An example from coal. Geophysical Research Letters,28(17), 3333–3336.
Wang, G., Chu, X., & Yang, X. (2016a). Numerical simulation of gas flow in artificial fracture coal by three-dimensional reconstruction based on computed tomography. Journal of Natural Gas Science and Engineering,34, 823–831.
Wang, L., Liu, S., Cheng, Y., Yin, G., Zhang, D., & Guo, P. (2017a). Reservoir reconstruction technologies for coalbed methane recovery in deep and multiple seams. International Journal of Mining Science and Technology,27(2), 277–284.
Wang, G., Shen, J., Chu, X., Cao, C., Jiang, C., & Zhou, X. (2017b). Characterization and analysis of pores and fissures of high-rank coal based on CT three-dimensional reconstruction. Journal of China Coal Society,42(8), 2074–2080.
Wang, G., Yang, X., Zhang, X., Li, W., & Shi, L. (2016b). Numerical simulation of gas flow in pores and fissures of coal based on segmentation of DTM threshold. Chinese Journal of Rock Mechanics and Engineering,45(1), 119–129.
Yao, Y., Liu, D., Che, Y., Tang, D., Tang, S., & Huang, W. (2009). Non-destructive characterization of coal samples from China using microfocus X-ray computed tomography. International Journal of Coal Geology,80(2), 113–123.
Zhang, C., Tu, S., Bai, Q., Yang, G., & Zhang, L. (2015). Evaluating pressure-relief mining performances based on surface gas venthole extraction data in longwall coal mines. Journal of Natural Gas Science and Engineering,24, 431–440.
Zhang, G., Ranjith, P. G., Perera, M. S. A., Lu, Y., & Choi, X. (2019a). Quantitative analysis of micro-structural changes in a bituminous coal after exposure to supercritical CO2 and water. Natural Resources Research. https://doi.org/10.1007/s11053-019-09463-y.
Zhang, L., Ren, T., Aziz, N., & Zhang, C. (2019b). Evaluation of coal seam gas drainability for outburst-prone and high-CO2-containing coal seam. Geofluids, 2019, 3481834. https://doi.org/10.1155/2019/3481834.
Zhang, L., Ye, Z., Huang, M., & Zhang, C. (2019c). Characteristics of bituminous coal permeability response to the pore pressure and effective shear stress in the Huaibei coalfield in China. Geofluids, 2019, 5489051. https://doi.org/10.1155/2019/5489051.
Zhang, C., Zhang, L., Tu, S., Hao, D., & Teng, T. (2018). Experimental and numerical study of the influence of gas pressure on gas permeability in pressure relief gas drainage. Transport in Porous Media,124(3), 995–1015.
Zhang, L., Zhang, C., Tu, S., & Tu, H. (2016). A study of directional permeability and gas injection to flush coal seam gas testing apparatus and method. Transport in Porous Media,111(3), 573–589.
Zhou, S., Liu, D., Cai, Y., Yao, Y., & Li, Z. (2017). 3D characterization and quantitative evaluation of pore-fracture networks of two Chinese coals using FIB-SEM tomography. International Journal of Coal Geology,174, 41–54.
Acknowledgment
This study was supported by the Fundamental Research Funds for the Central Universities (2018BSCXB18), the Postgraduate Research & Practice Innovation Program of Jiangsu Province (KYCX18_1959) and the Priority Academic Programme Development of Higher Education Institutions in Jiangsu Province. Thanks to Dr. Weining Xie and Advanced Analysis and Computing Center of China University of Mining and Technology.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Hao, D., Tu, S. & Zhang, C. Experimental Study on the Effect of Moisture Content on Bituminous Coal Porosity Based on 3D Reconstruction of Computerized Tomography. Nat Resour Res 29, 1657–1673 (2020). https://doi.org/10.1007/s11053-019-09528-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11053-019-09528-y