Application of Magnetotelluric (MT) Resistivity to Imaging of Regional Three-Dimensional Geologic Structures and Groundwater Systems

Abstract

Widespread definition of a groundwater system in three dimensions is necessary for the management and maintenance of groundwater resources. A magnetotelluric (MT) survey can be an effective geophysical prospecting method for imaging regional geological structures by measuring both shallow and deep resistivity. To demonstrate the capability of an MT survey to characterize a groundwater system, the Kumamoto area of central Kyushu in southwestern Japan was selected as a case study site because of its rich groundwater resources. Three-dimensional (3D) MT resistivity structure to a depth of 5 km was modeled by 1D inversion analysis of raw MT data and 3D interpolation of the resultant resistivity column data by the optimization principle method. Consequently, both deep and shallow aquifers were detected. A high-resistivity zone appears at depths between 500 and 2,000 m between the Futagawa–Hinagu faults and the Usuki–Yatsushiro tectonic line, which supports the existence of an aquiclude under the aquifer. The most important characteristic inferred from the 3D resistivity model is that the deep groundwater system below a depth of 1,000 m has two main flow paths. One path is likely to be through porous rocks because the low resistivity zone is regarded as tuff with sand and gravel, and the other flow path is interpreted to be through fractured zones along the Hinagu faults. Hence, the path and direction of the groundwater flows are probably controlled by geologic structures and the configuration of the active faults. These findings support the effectiveness of the MT method for investigating groundwater systems.