Skip to main content
Log in

Detection of iron oxide nanoparticles in petroleum hydrocarbon media by single-particle inductively coupled plasma mass spectrometry (spICP-MS)

  • Research paper
  • Published:
Journal of Nanoparticle Research Aims and scope Submit manuscript

Abstract

Engineered iron oxide (Fe3O4) nanoparticles (NPs) were synthesized with a silica shell using a modified alkylsilane approach with o-xylene, as a hydrocarbon media, and transmission electron microscopy (TEM) and single-particle inductively coupled plasma mass spectrometry (spICP-MS) were used to determine the particle size of the Fe3O4 core diameter. In contrast, mass concentrations of the Fe3O4 particles were determined using spICP-MS, using helium (He) as a collision gas to control spectral interferences from ArO and CaO on Fe at m/z 56. Different cell gas flow rates (3, 3.5, and 4 mL/min) and NP’s solution dilution factors from 1:20,000 up to 1:60,000 were investigated; He flow rate of 4 mL/min and a dilution factor of 1:20,000 were found as optimum. The spICP-MS method was calibrated by using gold nanospheres (polystyrene-coated) in toluene as reference material. For the engineered Fe3O4 nanoparticles, TEM. Results gave a (63 ± 6 nm) value for the Fe2O3 core diameter, while spICP-MS was 61.1 ± 4.5 nm (n = 36), demonstrating the excellent agreement among methods. The method was applied for the analysis Fe oxide NPs in petroluem hydrocarbon materials and data compared with TEM. Two standard reference materials (SRMs); NIST 2717a sulfur in residual fuel oil and NIST 8505 vanadium in crude oil were selected. spICP-MS results agreed pretty well among these techniques. These findings suggest that spICP-MS could be useful to characterize Fe-containing particles in complex solution media, such as petroleum hydrocarbons.

Graphical abstract

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9

Similar content being viewed by others

Data availability

Upon request

References

Download references

Acknowledgments

The authors thank Chevron for granting the permission to publish this work.

Funding

Chevron Energy Technology Company, Petroleum, and Material Characterization followed ethical standards.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Francisco Lopez-Linares.

Ethics declarations

Conflict of interest

The authors declare that they have no conflict of interest.

Code availability

Not applicable

Additional information

Publisher’s note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Nelson, J., Saunders, A., Poirier, L. et al. Detection of iron oxide nanoparticles in petroleum hydrocarbon media by single-particle inductively coupled plasma mass spectrometry (spICP-MS). J Nanopart Res 22, 304 (2020). https://doi.org/10.1007/s11051-020-05033-z

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1007/s11051-020-05033-z

Keywords

Navigation