Skip to main content
Log in

Fabrication of binder-free electrode using reinforced resorcinol formaldehyde-based carbon aerogels

  • Research Paper
  • Published:
Journal of Nanoparticle Research Aims and scope Submit manuscript

Abstract

In this study, the electrochemical performance of the binder-free electrode based on the reinforced resorcinol formaldehyde (RF) carbon aerogels (CAs) was investigated for electric double layer capacitor (EDLC) application. Resorcinol formaldehyde aerogel (RF) was crosslinked using methylene diphenyl diisocyanate (MDI) and then pyrolyzed to produce carbon aerogel (CA). CA was subsequently activated using CO2 gas. The morphological changes due to the reinforcing and activation process were explored by SEM. The BET and BJH results showed an improvement in specific surface area and microporous volume. The CO2-activated CAs displayed up to twice more specific surface areas compared with the unactivated CAs. The compressive test verified an improvement of up to 5 times in the mechanical strength. In order to investigate the electrochemical performance, cyclic voltammetry (CV), charge/discharge (CD), and electrochemical impedance microscopy (EIS) were carried out. In an identical electrode weight, the specific capacity of binder-free electrodes increased about twice, in comparison with the common electrodes due to the removal of the binder and the collector. The highest specific capacitance among the fabricated samples was obtained for the reinforced and activated sample with resorcinol/catalyst (R/C) ratio of 700, which was equal to 55.5 F/g.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Fig. 15
Fig. 16
Fig. 17
Fig. 18

Similar content being viewed by others

References

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Siamak Motahari.

Ethics declarations

Conflict of interest

The authors declare that they have no conflict of interest.

Additional information

Publisher’s note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Aghabararpour, M., Motahari, S., Sanaee, Z. et al. Fabrication of binder-free electrode using reinforced resorcinol formaldehyde-based carbon aerogels. J Nanopart Res 21, 178 (2019). https://doi.org/10.1007/s11051-019-4624-0

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1007/s11051-019-4624-0

Keywords

Navigation