Abstract
The present work contributes to the field of multibody systems with respect to the absolute coordinate formulation with a reduced expression of the strain energy and a non-linear constitutive model. Standard methods for multibody systems lead to highly non-linear terms either in the mass matrix or in the stiffness matrix and the most expensive part in the solution of the equations of motion is the assembling of these matrices, the computation of the Jacobian of the non-linear system and the solution of a linear system with the system matrices. In the present work, a consistent simplification of the equations of motion with respect to small deformations but large rigid-body motions is performed. The absolute coordinate formulation is used, therefore the total displacements are the unknowns. This formulation leads to a constant mass matrix while the non-linear stiffness matrix is composed of the constant small strain stiffness matrix rotated by the underlying rigid body rotation. Plastic strains are introduced by an additive split of the strain into an elastic and a plastic part, a yield condition and an associative flow rule. The decomposition of strain has to be performed carefully in order to obey the principle of objectivity for plasticity under large rigid body rotations. As an example, a two-dimensional plate which is hinged at one side and driven by a harmonic force at the opposite side is considered. Plastic deformation is assumed to occur due to extreme environmental influences or due to failure of some attached parts like a defect bearing.
Similar content being viewed by others
References
Bremer, H. and Pfeiffer, F., Elastische Mehrkörpersysteme. B. G. Teubner, Stuttgart, 1992.
Lennartsson, A., Efficient Multibody Dynamics, PhD thesis, Royal Institute of Technology, Department of Mechanics, Stockholm, 1999.
Hairer, E., N⊘rsett, S. P. and Wanner, G., Solving Ordinary Differential Equations I, Nonstiff Problems, Springer Verlag, Berlin, 1987.
Hairer, E. and Wanner, G., Solving Ordinary Differential Equations II, Stiff and Differential-Algebraic Problems, Springer Verlag, Berlin, 1991.
Bremer, H., Dynamik und Regelung Mechanischer Systeme, Teubner Studienbucher, Band 67, B. G. Teubner, 1988.
Shabana, A. A., Dynamics of Multibody Systems, 2nd edn., Cambridge University Press, 1998.
de Jalón, J. G. and Bayo, E., Kinematic and Dynamic Simulation of Multibody Systems, The Real Time Challenge, Springer, New York, 1994.
Orden, J. C. G. and Goicolea, J. M., ‘Conserving properties in constrained dynamics of flexible multibody systems’, Multibody Sys. Dyn. 4, 2000, 225–244.
Nikravesh, P., Chung, I. and Benedict, R. L., ‘Plastic hinge approach to vehicle crash simulation’, Computers and Structures 16, 1983, 395–400.
Ambrosio, J. A. C. and Nikravesh, P. E., ‘Elasto-plastic deformations in multibody dynamics’, Nonlinear Dynamics 3, 1992, 85–104.
Gerstmayr, J. and Irschik, H., ‘The elasto-plastic pendulum with geometric stiffening’, ZAMM 81(2), 2001, 337–338.
Gerstmayr, J. and Irschik, H., ‘Vibrations of the elasto-plastic pendulum’, Int. J. Nonlin. Mech. 38, 2003, 111–122.
Gerstmayr, J., Holl, H. J. and Irschik, H., ‘Development of plasticity and damage in vibrating structural elements performing guided rigid-body motions’, Arch. Appl. Mech. 71, 2001, 135–145.
Gerstmayr, J. and Irschik, H., ‘Dynamic analysis of machine elements exposed to plasticity and damage’, in Proceedings of the Symposium on Trends and Applications of Mathematics to Mechanics (STAMM2000), pp. 86–92. Elsevier, Paris, 2000.
Gerstmayr, J. and Irschik, H., ‘Computational methods for elasto-plastic multibody dynamic systems’, in Proceedings of the Fifth World Congress on Computational Mechanics (WCCM V), Eberhardsteiner Mang, Rammerstorfer (ed.), Vienna University of Technology, Austria, 2002.
Gerstmayr, J. and Irschik, H., ‘Control of an elasto-plastic pendulum’, in Proceedings of DETC’01, ASME 2001, Pittsburg, PA, 2001.
Zienkiewicz, O. C. and Taylor, R. L., Volume 2 – Solid Mechanics. Butterworth Heinemann, London, 2000.
Gerstmayr, J., ‘Comparison of the absolute nodal coordinate and the floating frame of reference formulation by means of a simplified strain formulation’, in Proceedings of DETC’03 2003 ASME Design Engineering Technical Conferences, Chicago, IL, 2003.
Gerstmayr, J. and Schöberl, J., ‘A 3D finite element approach to flexible multibody systems’, in Proceedings of the Fifth World Congress on Computational Mechanics (WCCM V), Eberhardsteiner Mang, Rammerstorfer (ed.), Vienna University of Technology, Austria, 2002.
Vetyukov, Yu., Gerstmayr, J. and Irschik, H., ‘Plastic multipliers as driving variables of numerical simulation in elasto-plasticity’, Mechanics Research Communications 30(5), 2003, 421–430.
Simo, J. C. and Hughes, T. J. R., Computational Inelasticity. Springer, New York, 1998.
Gurtin, M. E., ‘The Linear Theory of Elasticity’, in Handbuch der Physik, VIa/2, Berlin, Springer-Verlag, 1972.
Gerstmayr, J. and Schöberl, J., ‘An implicit Runge-Kutta based solver for 3-dimensional multibody systems’, PAMM 3(1), 2003, 154–155.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Gerstmayr, J. The Absolute Coordinate Formulation with Elasto-Plastic Deformations. Multibody Syst Dyn 12, 363–383 (2004). https://doi.org/10.1007/s11044-004-2522-3
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/s11044-004-2522-3