Abstract
A semi-analytic integration method is proposed, which can be used in numerical simulation of the mechanical behavior of nonlinear viscoelastic and viscoplastic materials with arbitrary stress nonlinearity. The method is based upon the formalism of Prony series expansion of the creep response function and accepts arbitrary stress protocols as input data. An iterative inversion technique is presented, which allows for application of the method in routines that provide strain and require stress as output. The advantage with respect to standard numerical integration methods such as the Runge-Kutta method is that it remains numerically stable even for integration over very long time steps during which strain may change considerably due to creep or recovery effects. The method is particularly suited for materials, whose viscoelastic and viscoplastic processes cover a very wide range of retardation times. In the case of simulation protocols with phases of slowly varying stress, computation time is significantly reduced compared to the standard integration methods of commercial finite element codes. An example is given that shows how the method can be used in three dimensional (3D) constitutive equations. Implemented into a Finite Element (FE) code, the method significantly improves convergence of the implicit time integration, allowing longer time increments and reducing drastically computing time. This is shown in the case of a single element exposed to a creep and recovery cycle. Some simulations of non-homogeneous boundary value problems are shown in order to illustrate the applicability of the method in 3D FE modeling.
Similar content being viewed by others
References
Bardenhagen, S.G., Stout, M.G., Gray, G.T.: Three-dimensional, finite deformation, viscoplastic constitutive models for polymeric materials. Mech. Mater. 25(4), 235–253 (1997). doi:10.1016/S0167-6636(97)00007-0
Bažant, Z.P.: Matrix differential equation and higher-order numerical methods for problems of non-linear creep. Int. J. Numer. Methods Eng. 4, 11–15 (1972)
Bonet, J.: Large strain viscoelastic constitutive models. Int. J. Solids Struct. 38(17), 2953–2968 (2001). doi:10.1016/S0020-7683(00)00215-8
Buckley, C.P.: Multiaxial nonlinear viscoelasticity of solid polymers. Polym. Eng. Sci. 27(2), 156–164 (1987)
Carpenter, W.C.: Viscoelastic stress analysis. Int. J. Numer. Methods Eng. 4, 357–366 (1972)
Cocquerez, P., Guigue, P., Guilbon, R., Phulpin, T., Durand, M., Lefevre, J.P., Eymard, M., Lafourcade, M.: Test flights of CNES superpressure balloons in experimental arctic campaigns 2000–2001—objectives and results. In: Warmbein, B. (ed.) 15th ESA Symposium on European Rocket and Balloon Programmes and Related Research. ESA Special Publication, vol. 471, pp. 597–601 (2001)
Drozdov, A.D.: A constitutive model for nonlinear viscoelastic media. Int. J. Solids Struct. 34(21), 2685–2707 (1997). doi:10.1016/S0020-7683(96)00178-3
Gerngross, T., Xu, Y., Pellegrino, S.: Viscoelastic behaviour of pumpkin balloons. Adv. Space Res. 42(10), 1683–1690 (2008). doi:10.1016/j.asr.2007.03.093
Govindjee, S., Reese, S.: A presentation and comparison of two large strain deformation viscoelasticity models. ASME J. Eng. Mater. Technol. 119(3), 251–255 (1997). doi:10.1115/1.2812252
Haj-Ali, R.M., Muliana, A.H.: Numerical finite element formulation of the Schapery non-linear viscoelastic material model. Int. J. Numer. Methods Eng. 59, 25–45 (2004). doi:10.1002/nme.861
Hirsekorn, M., Petitjean, F., Deramecourt, A.: A continuous threshold model for the visco-elasto-plastic behavior of pet based multi-layer polymeric films. Mech. Time-Depend. Mater. 14(1), 25–45 (2009). doi:10.1007/s11043-009-9091-z
Kaliske, M., Rothert, H.: Formulation and implementation of three-dimensional viscoelasticity at small and finite strains. Comput. Mech. 19(3), 228–239 (1997). doi:10.1007/s004660050171
Lai, J., Bakker, A.: 3-D Schapery representation for non-linear viscoelasticity and finite element implementation. Comput. Mech. 18, 182–191 (1996). doi:10.1007/BF00369936
Lemaitre, J., Chaboche, J.L.: Mechanics of Solid Materials. Cambridge University Press, Cambridge (1994)
Lockett, F.J., Turner, S.: Nonlinear creep of plastics. J. Mech. Phys. Solids 19, 201–214 (1971)
Lou, Y.C., Schapery, R.A.: Viscoelastic characterization of a nonlinear fiber-reinforced plastic. J. Compos. Mater. 5(2), 208–234 (1971). doi:10.1177/002199837100500206
Nikonov, A., Davies, A.R., Emri, I.: The determination of creep and relaxation functions from a single experiment. J. Rheol. 49(6), 1192–1211 (2005). doi:10.1122/1.2072027
Oza, A., Vanderby, R., Lakes, R.S.: Interrelation of creep and relaxation for nonlinearly viscoelastic materials: application to ligament and metal. Rheol. Acta 42(6), 557–568 (2003). doi:10.1007/s00397-003-0312-0
Park, S., Schapery, R.: Methods of interconversion between linear viscoelastic material functions. Part I: A numerical method based on Prony series. Int. J. Solids Struct. 36(11), 1653–1675 (1999). doi:10.1016/S0020-7683(98)00055-9
Sawant, S., Muliana, A.: A thermo-mechanical viscoelastic analysis of orthotropic materials. Compos. Struct. 83(1), 61–72 (2008). doi:10.1016/j.compstruct.2007.03.008
Schapery, R.A.: On the characterization of nonlinear viscoelastic materials. Polym. Eng. Sci. 9(4), 295–310 (1969). doi:10.1002/pen.760090410
Schapery, R.: Nonlinear viscoelastic and viscoplastic constitutive equations based on thermodynamics. Mech. Time-Depend. Mater. 1(2), 209–240 (1997). doi:10.1023/A:1009767812821
Schapery, R.A.: Nonlinear viscoelastic solids. Int. J. Solids Struct. 37(1–2), 359–366 (2000). doi:10.1016/S0020-7683(99)00099-2
Schapery, R.A., Park, S.W.: Methods of interconversion between linear viscoelastic material functions. Part II: An approximate analytical method. Int. J. Solids Struct. 36(11), 1677–1699 (1999). doi:10.1016/S0020-7683(98)00060-2
Sorvari, J., Malinen, M.: Numerical interconversion between linear viscoelastic material functions with regularization. Int. J. Solids Struct. 44(3–4), 1291–1303 (2007). doi:10.1016/j.ijsolstr.2006.06.029
Touati, D., Cederbaum, G.: Postbuckling of non-linear viscoelastic laminated plates. Part I: Material considerations. Compos. Struct. 42, 33–41 (1998). doi:10.1016/S0263-8223(98)00060-9
Zhang, L., Ernst, L.J., Brouwer, H.R.: A study of nonlinear viscoelasticity of an unsaturated polyester resin, part 1: uniaxial model. Mech. Mater. 26(3), 141–166 (1997). doi:10.1016/S0167-6636(97)00028-8
Zocher, M.A., Groves, S.E., Allen, D.H.: A three dimensional finite element formulation for thermoviscoelastic orthotropic media. Int. J. Numer. Methods Eng. 40, 2267–2288 (1997)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Hirsekorn, M., Petitjean, F. & Deramecourt, A. A semi-analytical integration method for the numerical simulation of nonlinear visco-elasto-plastic materials. Mech Time-Depend Mater 15, 139–167 (2011). https://doi.org/10.1007/s11043-010-9123-8
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11043-010-9123-8