The main principles of using wires with tungsten nanopowder for arc cladding are considered. Special features of production and application of tungsten-modified wires are analyzed. The microstructure of the high-strength layer obtained by cladding wires with different tungsten nanopowder contents is investigated. Microhardness of clad specimens is determined.
Similar content being viewed by others
References
R. E. Kryukov and N. A. Kozyrev, Bases of Creating Carbon-Containing Welding and Surfacing Materials: Monograph [in Russian], Izd. Tomsk. Politekh. Univ., Tomsk (2019).
S. S. Kumar, N. Murugan, and K. K. Ramachandran, “Microstructure and mechanical properties of friction stir welded AISI 316L austenitic stainless steel joints,” J. Mater. Process. Technol., 254, 79 – 90 (2018).
D. G. Mohan, S. Gopi, and V. Rajasekar, “Mechanical and corrosion-resistant properties of hybrid-welded stainless steel,” Mater. Perform., 57(1), 53 – 56 (2018).
A. Saha and S. C. Mondal, “Multi-objective optimization of welding parameters in mmaw for nano-structured hardfacing material using GRA coupled with PCA,” Trans. Indian Inst. Met., 70(6), 1491 – 1502 (2017).
Jian-Yih Wang, Tien-Chan Chang, Li-Zen Chang, and Shyong Lee, “Effect of Al and Mn content on the mechanical properties of various ECAE processed Mg – Li – Zn alloys,” Mater. Trans., 47(4), 971 – 976 (2006).
M. A. Kuznetsov, N. A. Krampit, and E. A. Zernin, “Russian Patent No. 2613264. Mechanized welding method with fusible electrode in a protective gas atmosphere,” Byull. Izobr. Polezn. Modeli, No. 2 (2017).
E. A. Zernin and D. E. Gusarov, “Device for preparing test specimens of welding powder wire with use of nano-materials,” in: Innovative Technology and Economics in Engineering, Coll. IXth Internat. Sci.-Pract. Conf. [in Russian], Izd. Politekh. Univ., Tomsk (2018), pp. 53 – 55.
N. A. Yavorovskii, L. N. Shian, G. G. Sevel’ev, and A. I. Galanov, “Modification of polymer membranes of amino-oxohydroxide nano-fiber,” Nanotekhnika, No. 3(15), 40 – 45 (2008).
M. I. Lerner, N. V. Svarovskaya, S. G. Psakh’e, and O. V. Bakina, “Preparation technology, properties and some fields of application of electrical explosive metal nanopowders,” Ross. Nanotekhnol., 4(11 – 12), 56 – 68 (2009).
M. A. Kuznetsov, E. A. Zernin, V. I. Danilov, et al., “Optimization of modification parameters for surface metal pf nano-structured ammonium oxohydroxide fibers,” Ross. Nanotekhnol., 13(9 – 10), 70 – 76 (2018).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 5, pp. 22 – 25, May, 2022.
Rights and permissions
Springer Nature or its licensor holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Zernin, E.A., Kozyrev, N.A., Danilov, V.I. et al. Microstructural Analysis of a Powder Wire Clad Layer Containing Tungsten Nanopowder. Met Sci Heat Treat 64, 264–267 (2022). https://doi.org/10.1007/s11041-022-00797-8
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11041-022-00797-8