Amodel of three-dimensional temperature and residual stress fields was developed for the process of laser deposition of coatings from a Fe-based alloy containing 32% Mn, 9% Si, 4% Cr, and 3% Ni using a rectangular laser beam. The obtained model links the temperature fields to the structure and makes it possible to calculate the evolving temperature and stresses during cladding. The analysis of the simulation results is provided.
Similar content being viewed by others
References
P. Xu, H. Ju, C. X. Lin, et al., “In-situ synthesis of Fe – Mn – Si – Cr – Ni shape memory alloy functional coating by laser cladding,” Chin. Opt. Lett., 12, 48 – 50 (2013).
Q. Lai, R. Abrahams, W. Yan, et al., “Effects of preheating and carbon dilution on material characteristics of laser-cladded hypereutectoid rail steels,” Mat. Sci. Eng.: A-Struct., 742, 760 – 761 (2018).
Y. Q. Jiang, J. Li, Y. F. Juan, et al., “Evolution in microstructure and corrosion behavior of AlCoCr x FeNi high-entropy alloy coatings fabricated by laser cladding,” J. Alloy. Compd., 775, 1 – 14 (2019).
D. Wang, Q. Hu, and X. Zeng, “Residual stress and cracking behaviors of Cr 13 Ni 5 Si 2 based composite coatings prepared by laser-induction hybrid cladding,” Surf. Coat. Tech., 274, 51 – 59 (2015).
N. Nazemi, J. Urbanic, and M. Alam, “Hardness and residual stress modeling of powder injection laser cladding of P420 coating on AISI 1018 substrate,” Int. J. Adv. Manuf. Tech., 93, 9 – 12 (2017).
S. Zhou, X. Dai, and H. Zheng, “Microstructure and wear resistance of Fe-based WC coating by multi-track overlapping laser induction hybrid rapid cladding,” Opt. Laser. Technol., 44, 190 – 197 (2012).
H. Feng, J. Li, and J. Shun, “Study on remanufacturing repair of damaged crank shaft journal surface by laser cladding,” Chinese J. of Lasers, 41, 0803003 (2014).
S. Yan, S. Dong, B. Xu, et al., “Characterization and optimization of process in laser cladding Fe314 alloy,” Infrared & Laser Eng., 5, 12039 (2011).
A. A. Salem, S. R. Kalidindi, and S. L. Semiatin, “Strain hardening due to deformation twinning in ε-titanium: Constitutive relations and crystal-plasticity modeling,” Metall. Mater. Trans. A, 37, 259 – 268 (2006).
S. H. Kang and Y. T. Im, “Three-dimensional thermo-elastic-plastic finite element modeling of quenching process of plain-carbon steel in couple with phase transformation,” Int. J. Mech. Sci., 49, 423 – 439 (2007).
N. Tamanna, R. Crouch, I. R. Kabir, and S. Naher, “An analytical model to predict and minimize the residual stress of laser cladding process,” Appl. Phys. A-Mater., 124, 151 (2019).
M. Labudovic, D. Hu, and R. Kovacevic, “A three dimensional model for direct laser metal powder deposition and rapid prototyping,” J. Mater. Sci., 38, 35 – 49 (2003).
L. Hua, W. Tian, W. Liao, and C. Zeng, “Numerical simulation of temperature field and residual stress distribution for laser cladding remanufacturing,” Adv. Mech. Eng., 6 (2014).
J. Ahn, E. He, L. Chen, et al., “Determination of residual stresses in fibre laser welded AA2024-T3 T-joints by numerical simulation and neutron diffraction,” Mat. Sci. Eng. A-Struct., 712, 685 – 703 (2018).
K. Ren, Y. Chew, J. Y. H. Fuh, et al., “Thermo-mechanical analyses for optimized path planning in laser aided additive manufacturing processes,” Mater. Design, 162, 80 – 93 (2019).
Y. Javid and M. Ghoreishi, “Thermo-mechanical analysis in pulsed laser cladding of WC powder on Inconel 718,” Int. J. Adv. Manuf. Tech., 92, 69 – 79 (2017).
S. Paul, R. Singh, and W. Yan, “Thermal model for additive restoration of mold steels using crucible steel,” J. Manuf. Proc., 24, 346 – 354 (2016).
C. Liu, C. Li, Z. S. Zhang, et al., “Modeling of thermal behavior and microstructure evolution during laser cladding of alsi 10 mg alloys,” Opt. Laser. Technol., 123, 105926 (2019).
Z. Zhang, P. Farahmand, and R. Kovacevic, “Laser cladding of 420 stainless steel with molybdenum on mild steel A36 by a high power direct diode laser,” Mater. Design, 109, 686 – 699 (2016).
E. D. Derakhshan, N. Yazdian, B. Craft, et al., “Numerical simulation and experimental validation of residual stress and welding distortion induced by laser-based welding processes of thin structural steel plates in butt joint configuration,” Opt. Laser. Technol., 104, 170 – 182 (2018).
P. Farahmand and R. Kovacevic, “An experimental–numerical investigation of heat distribution and stress field in single- and multi-track laser cladding by a high-power direct diode laser,” Opt. Laser. Technol., 63, 154 – 168 (2014).
J. Tian, P. Xu, J. Chen, and Q. Liu, “Microstructure and phase transformation behavior of a Fe – Mn – Si – Cr – Ni alloy coating by laser cladding,” Opt. Laser. Eng., 122, 97 – 104 (2019).
This work was sponsored by the Guizhou Provincial Education Department (QJH KY Z [2018] 305) and Guiyang Science and Technology Bureau (GYU-KYZ [2019~2020] CJ-06).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 6, pp. 37 – 44, June, 2021.
Rights and permissions
About this article
Cite this article
Shao, Y.P., Xu, P. & Tian, J.Y. Numerical Simulation of the Temperature and Stress Fields in Fe-Based Alloy Coatings Produced by Wide-Band Laser Cladding. Met Sci Heat Treat 63, 327–333 (2021). https://doi.org/10.1007/s11041-021-00690-w
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11041-021-00690-w