The effect of laser surface alloying with copper on the structure, phase composition and microhardness of surface layers of titanium is studied. Treatment modes improving the structure and special properties of the surface are determined.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Eleanor Redmore, Xiaoying Li, and Hanshan Dong, “Tribological performance of surface engineered low-cost beta titanium alloy,” Wear, 426 – 427, 952 – 960 (2019).
S. V. Gnedenko, Yu. P. Sharkeev, S. L. Sinebryukhov, et al., “Functional coatings for implantation materials,” Tikhookean. Med. Zh., No. 1, 12 – 19 (2012).
V. V. Chebodaev, E. G. Komarova, and Yu. P. Sharkeev, “Comparative studies of physicochemical properties of microarc calcium- phosphate coatings on plain titanium and in alloy Ti – 40 wt.% Nb,” Izv. Samarsk. Nauch. Cent. Ross. Akad. Nauk, 16[4(3)], 654 – 658 (2014).
S. V. Shakhov, Effect of Gas-Saturated Layers and Oxide Films Formed Under Air Annealing on the Resistance of Thin-Sheet Titanium Semiproducts to Dynamic Loads, Author’s Abstract of Candidate’s Thesis [in Russian], Moscow (2019), 23 p.
H. Dong and T. Bell, “Enhanced wear resistance of titanium surfaced by a new thermal oxidation treatment,” Wear, 238, 131 – 137 (2000).
L. A. Teplova, D. N. Shashkov, and N. S. Yudina, “Effect of laser alloying on hardening of titanium and its alloys,” in: Laser Thermal and Thermochemical Treatment in Machine Building [in Russian], MADI, Moscow (1985), pp. 54 – 56.
S. P. Velikevich, N. A. Bereza, and S. B. Bushik, “Regular features of variation of the morphology of crystallization front in titanium alloys after boronizing with the help of a beam of continuous CO2-laser,” Fiz. Khim. Obrab. Mater., No. 2, 24 – 30 (1990).
B. P. Lazarenko, V. V. Mikhailov, and A. B. Gitlevich, “Laser effect on coatings deposited by electric arc alloying,” Elektr. Obrab. Mater., No. 3, 24 – 25 (1987).
A. G. Grigor’yants, A. N. Safonov, and V. M. Tarasenko, “Hardening of alloy surfaces by laser radiation,” Poverkh., Fiz., Khim., Mekh., No. 9, 124 – 131 (1983).
A. A. Uglov, V. A. Grebennikov, V. G. Panastov, et al., “Special features of laser hardening of metals in a nitrogen flow,” Fiz. Khim. Obrab. Mater., No. 2, 3 – 6 (1984).
L. K. Gordienko and A. A. Shipko, Structure and Phase Transformations in Titanium Alloys under Rapid Heating [in Russian], Nauka i Tekhnika, Minsk (1983), 335 p.
A. N. Lyubchenko, E. A. Satanovskii, and V. N. Postovoit, “Some features of pulsed laser hardening of titanium alloys,” Fiz. Khim. Obrab. Mater., No. 6, 130 – 134 (1991).
M. A. German, Effect of Thermal and Thermohydrogen Treatments on Structure Formation and Mechanical Properties of Preforms from (α + β)-Titanium Alloys Obtained by Additive Technologies, Author’s Abstract of Candidate’s Thesis [in Russian], Moscow (2109), 22 p.
V. S. Muratov and E. A. Morozova, “Laser alloying of titanium surface with iron,” Zagot. Proizvod. Mashinostr., No. 8, 33 – 37 (2016).
A. G. Grigor’yants, A. N. Safonov, A. A. Dedov, and I. F. Popova, “A study of surface hardening of titanium alloy OT-4 with the help of laser radiation,” in: Surface Methods of Hardening of Metals and Alloys [in Russian], NTP, Moscow (1983), pp. 60 – 62.
V. S. Muratov and E. A. Morozova, “Titanium structure and property formation with chromium laser surface alloying,” Metal Sci. Heat Treat., 61(5 – 6), 340 – 343 (2019).
Yu. A. Sokolov, L. E. Afanas’eva, I. A. Barabonova, et al., “Microstructure and properties of alloy Ti – 6Al – 4V obtained by laser electron-beam synthesis,” Metalloved. Term. Obrab. Met., No. 6, 45 – 50 (2015).
C. G. Woychik, D. N. Lowndes, and T. V. Massalski, “Solidification structures in melt-spun and pulsed laser-quenched Cu – Ti alloys,” Acta Metal., 33(10), 1861 – 1871 (1985).
J. Folkes, “Laser surface melting and alloying of titanium alloys,” in: Titanium: Sci. and Technol., Proc. 5th Int. Conf., Munich Overuesel (1985), Vol. 2, pp. 987 – 994.
D. C. Jacobson,W. M. Augustymak, and J. M. Poatl., “Analysis of laser alloyed surfaces,” IEEE Trans. Nuclear Sci., NS-28(2), 1882 – 1830 (1981).
N. A. Nochovnaya, P. V. Panin, E. B. Alekseev, and K. A. Bokov, “Advanced sparingly alloyed titanium alloys: application and prospects of development,” Metalloved. Term. Obrab. Met., No. 9, 8 – 15 (2016).
M. R. Bateni, J. A. Szpunar, F. Ashrafizadeh, M. Zandrahimi, “The effect of novel Ti – Cu intermetallic compound coatings on tribological properties of copper,” in: Annals of Univ. “DUNAREA DE JOS” of Galati Fascicle VIII, Tribologi (2003), pp. 55 – 62.
A. I. Kovtunov, D. I. Plakhotny, A. M. Ostryanko, A. A. Gushchin, “A study of surfacing process and properties of alloys of the titanium – copper system,” in: Engineering Aspects: New Approaches to Solution of Urgent Problems, Proc. Int. Workshop [in Russian], Izd. Innov. Tsentr Razv. Obraz. Nauki, Kazan (2014), pp. 33 – 37.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 10, pp. 8 – 12, October, 2020.
Rights and permissions
About this article
Cite this article
Muratov, V.S., Morozova, E.A., Zhuravel, L.V. et al. Formation of Structure and Properties in Titanium under Laser Surface Alloying with Copper. Met Sci Heat Treat 62, 604–608 (2021). https://doi.org/10.1007/s11041-021-00611-x
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11041-021-00611-x