The effect of ion nitriding in glow discharge on the structure and mechanical properties of steel R6M5 after quenching from 1200°C and tempering at 560°C with preliminary severe plastic deformation (SPD) is studied. Application of ion nitriding in glow discharge is shown to be effective for hardening the high-speed steel RM5 after SPD.
Similar content being viewed by others
References
A. D. Khvan and P. M. Panin, “Raising the endurance of steel R6M5,” Vest. VGTU, 7(11 – 12), 122 – 124 (2011).
E. F. Khairetdinov, G. I. Raab, A. A. Nabiullin at al., “Formation of structure and properties in high-speed tool steel by cold severe plastic deformation and subsequent heat treatment,” Mater. Phys. Mech., 27(2), 205 – 214 (2016).
G. V. Klevtsov, R. Z. Valiev, N. A. Klevtsova, et al., “Strength and fracture mechanisms of nanostructured metallic materials under single kinds of loading,” Metalloved. Term. Obrab. Met., No. 9(747), 54 – 62 (2017).
I. E. Volokitina and G. G. Kurpatov, “Effect of initial structural state on formation of structure and mechanical properties of steel under ECAP,” Metalloved. Term. Obrab. Met., No. 12(750), 44 – 50 (2017).
A. D. Khvan, “Raising the endurance of steel R6M5 by plastic deformation in nonisothermal mode,” Zagot. Proizvod. Mashinostr., No. 11, 21 – 23 (2011).
L. R. Shaikhutdinova, E. F. Khairetdinov, V. D. Sitdikov, et al., “A study of the effect of ion nitriding on the structure and mechanical properties of steel R6M5 after SPD,” Vest. UGATU, 21, No. 4(78), 50 – 56 (2017).
V. V. Budilov, K. N. Ramazanov, R. K. Vafin, and Yu. G. Khusainov, “Nitriding of steel R6M5 in glow discharge in cross electric and magnetic fields,” Fiz. Khim. Obrab. Mater., No. 6, 54 – 59 (2013).
K. N. Ramazanov, V. V. Budilov, and R. K. Vafin, “Ion nitriding of tool steels with application of magnetic field,” Metalloved. Term. Obrab. Met., No. 7, 40 – 42 (2011).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 4, pp. 22 – 27, April, 2020.
Rights and permissions
About this article
Cite this article
Shaikhutdinova, L.R., Khairetdinov, E.F. & Khusainov, Y.G. Effect of Ion Nitriding on the Structural and Phase Composition and Mechanical Properties of High-Speed Steel R6M5 after SPD. Met Sci Heat Treat 62, 263–268 (2020). https://doi.org/10.1007/s11041-020-00546-9
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11041-020-00546-9