The structure and the hardness of steel 8Kh3SMF after isothermal quenching at 200 – 700°C with a step of 50°C and holds for 20 – 5000 sec are studied. An experimental isothermal diagram of decomposition of supercooled austenite is plotted. The kinetics of phase transformations in steel 8Kh3SMF is described with the help of the Austin–Rickett equation.
Similar content being viewed by others
References
I. V. Maisuradze, Yu. V. Yudin, and M. A. Ryzhkov, “Numerical simulation of pearlitic transformation in steel 45Kh5MF,” Metalloved. Term. Obrab. Met., No. 9(711), 55 – 59 (2014).
L. E. Popova and A. A. Popov, Diagrams of Transformation of Austenite in Steels and of Beta-Solution in Titanium Alloys: Heat-Treater Handbook [in Russian], Metallurgiya, Moscow (1991), 503 p.
S. A. Saltykov, Stereometric Metallography [in Russia], Metallurgiya (1976), 270 p.
M. D. Kazyaev, Yu. A. Samoilovich, and V. S. Paleev, “A study of the stressed state in heating of cold-rolling rolls with the help of mathematical simulation,” in: Advanced Scientific Achievements in Metallurgical Heat Technology and their Implementation in Industry, Proc. Int. Workshop Devoted to the 95th Jubilee of the TIM Department of URFU and 85th Jubilee of VNIIMT, Ekaterinburg, 17 – 18 September 2015 [in Russian], URFU, Ekaterinburg (2015), pp. 286 – 294.
W. A. Johnson and R. F. Mehl, “Reaction kinetics in processes of nucleation and growth,” Trans. AIME, 135, 416 – 468 (1039).
M. Avrami, “Kinetics of phase change I. General Theory,” J. Chem. Phys., 7, 1103 – 1112 (1939).
M. Avrami, “Kinetics of phase change II. Transformation-time relations for random distribution of nuclei,” J. Chem. Phys., 8, 212 – 224 (1940).
M. Avrami, “Kinetics of phase change III. Granulation, phase change and microstructure,” J. Chem. Phys., 9, 177 – 184 (1941).
N. X. Sun, X. D. Liu, and K. Lu, “An explanation to the anomalous Avrami exponent,” Scr. Mater., 34(8), 1201 – 1207 (1996).
Yu. Yudin and V. M. Farber, “Characteristic features of the kinetics of decomposition of supercooled austenite of alloy steels in the pearlite range,” Met. Sci. Heat Treat., 43(1–2), 45 – 50 (2011).
Yu. V. Yudin, M. A. Gervas’ev, and T. A. Kansafarova, “The effect of chromium and nickel of the stability of undercooled austenite in chromium-nickel-molybdenum steels,” Phys. Met. Metallogr., 87(4), 350 – 353 (1999).
Yu. V. Yudin, Theoretical and Technological Aspects of Heat Treatment of Large-Size Articles from High-Strength Steels on the Base of Simulation of Phase and Structural Transformations, Author’s Abstract of Doctoral’s Thesis [in Russian], UGTU-UPI, Ekaterinburg (1999), 35 p.
A. A. Kuklina, M. V. Maisuradze, and Yu. V. Yudin, “Application of Austin–Rickett parameter in analytical description of the kinetics of decomposition of metastable austenite by bainitic stage,” in: Engineering Sciences — from Theory to Practice, Abs. LVI Int. Workshop [in Russian], SibAK, Novosibirsk (2016), No. 3(51), pp. 45 – 53.
V. M. Schastlivtsev, D. A. Mirzaev, and I. L. Yakovleva, Structure of Heat Treated Steel [in Russian], Metallurgiya, Moscow (1994), 288 p.
J. W. Cahn, “Transformation kinetics during continuous cooling,” Acta Metall., No. 4, 572 – 575 (1956).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 9, pp. 3 – 9, September, 2019.
Rights and permissions
About this article
Cite this article
Shchegolev, A.V., Kletsova, O.A., Firsova, N.V. et al. Kinetics of Phase Transformations in Roll Steel 8Kh3SMF. Met Sci Heat Treat 61, 527–533 (2020). https://doi.org/10.1007/s11041-020-00457-9
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11041-020-00457-9