Regular features of the effect of recrystallization of austenite under hot deformation on the formation of structure in thermal deformation treatment (with subsequent hold in the furnace and without it) of rolled sections from corrosion-resistant austenitic chromium-nickel steels 10Kh17N13M2T (EI-447) and 12Kh18N19MT are investigated. The kinetics of the austenite recrystallization is studied by metallography and measurement of the hardness of specimens and of the microhardness of recrystallized and not recrystallized grains. The volume of the recrystallized grains and their mean size are determined. The effect of the homogenizing modes in heating for quenching, and of accelerated and decelerated cooling after rolling in a 1050/950 rolling mill of the “Dneprospetsstal’” Company on the impact toughness of the steels is studied.
Similar content being viewed by others
References
M. L. Bernshtein, V. A. Zaimovskii, and L. M. Kaputkina, Thermomechanical Treatment of Steel [in Russian], Metallurgiya, Moscow (1983), 480 p.
S. S. Gorelik, S. V. Dobatkin, and L. M. Kaputkina, Recrystallization of Metals and Alloys [in Russian], Metallurgiya, Moscow (2005), 432 p.
Ya. I. Spektor, A. V. Nogovitsyn, Yu. V. Artamonov, et al., “Promising processes of joint heat and deformation treatment of rolled sections of special steels,” in: Building, Materals Science, and Machine Building, Coll. Works, PGASA, Dnepropetrovsk (2008), Issue 45, Part 4, pp. 18 – 31.
S. Z. Nekrasova, A. M. Sergienko, Ya. I. Spektor, et al., “Grain refinement under recrystallization of strained austenite and the properties of steel,” Fiz. Met. Metalloved., 41(6), 1213 – 1218 (1976).
Ya. I. Spektor, I. N. Kunitskaya, Yu. V. Yatsenko, and A. N. Tumko, “Thermokinetic diagrams of recrystallization of austenite in hot rolling of special steels,” Metalloved. Term. Obrab. Met., No. 7, 6 – 9 (2008).
W. Roberts, H. Boden, and B. Ahlblom, “Dynamic recrystallization kinetics,” Metal Sci., 13(3 and 4), 195 – 205 (1979).
A. Marchattiwar, A. Sarkar, J. K. Chakravartty, et al., “Dynamic recrystallization during hot deformation of 304 austenitic stainless steel,” J. Mater. Sci. Perform., 22(8), 2168 – 2175 (2013).
M. Jafari and A. Najafizadeh, “Dynamic recrystallization by necklace mechanism during hot deformation of 316 stainless steel,” Metal, 13.-15.5, 1 – 8 (2008).
M. I. Sinelnikov and N. V. Tikhiy, “About variation of the dislocation structure of austenite in the process of hot deformation by rolling,” Izv. Akad. Nauk SSSR, Metally, No. 2, 153 – 157 (1977).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 8, pp. 12 – 18, August, 2019.
Rights and permissions
About this article
Cite this article
Kunitskaya, I.N., Spektor, Y.I., Klimov, A.V. et al. Special Features of Recrystallization of Rolled Sections from Austenitic Chromium-Nickel Steels Under Thermal Deformation Treatment. Met Sci Heat Treat 61, 472–477 (2019). https://doi.org/10.1007/s11041-019-00448-5
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11041-019-00448-5