Results of a study of white iron cementite in binary Fe – C and ternary Fe – C – Si compositions and in castings of unalloyed white iron with traditional composition are presented. It is shown that the hardness and the corrosion strength of the cementite may vary in a wide range depending on the rate of cooling of the iron after crystallization. Optimum processes for casting and heat treatment of members of tilling machines from chilled cast iron are developed for raising their strength and wear resistance.
Similar content being viewed by others
References
V. S. Novikov, Provision of Endurance of Working Members of Tilling Machines, Author’s Abstract of Doctoral’s Thesis [in Russian], Moscow (2008), 38 p.
V. I. Pyndak and A. E. Novikov, “Energy efficiency of mechanisms and instruments for deep cultivation of soil,” J. Machinery Manuf. Reliab., 43(6), 532 – 536 (2014).
V. I. Pyndak and A. E. Novikov, Tribotechnical and energy assessment of parts of working members of cultivating machines after carburizing and laser hardening,” Metal. Sci. Heat Treat., 58(3 – 4), 226 – 230 (2016).
A. Yaziki, “A study of wear of carbonitrided plow shares from steel 30MnB5 for soil cultivation,” Metalloved. Term. Obrab. Met., No. 5, 46 – 51 (2011).
A. Yaziki and Y. Chavdar, “A study of cultivating tools from boronized sintered iron,” Metalloved. Term. Obrab. Met., No. 12, 56 – 60 (2016).
S. Dallaire and H. Levert, “Development of cored wires for improving the abrasion wear resistance of austenitic stainless steel,” J. Thermal Spray Technol., No. 6(4), 456 – 462 (1997).
N. Yu. Kozhukhova, Surfacing Reinforcement of Working Members of Tilling Machines Operating in Heavy Soils (for Plow Shares As an Example), Author’s Abstract of Candidate’s Thesis [in Russian], Moscow (2011), 19 p.
D. B. Bernshtein and I. B. Liskin, “Wear resistance of shares zonally hardened with hard alloys,” Trakt. Selkhoz. Mash., No. 9, 24 – 26 (1988).
A. Hasui and O. Morigaki, Surfacing and Spraying [Russian translation], Mashinostroenie, Moscow (1988), 240 p.
A. I. Igolkin and Yu. V. Zelenin, “Abrasion-resistant surfaced plates and pipes for mining applications,” Gorny Zh., No. 2, 57 – 59 (2011).
I. N. Bogachev and T. S. Vetrova, “A study of high-temperature deformation of cementite,” Prob. Metalloved. Fiz. Met., No. 3, 231 – 235 (1976).
A. Ya. Khrapov, G. L. Marks, and A. F. Krechman, “About cementite,” Metalloved. Term. Obrab. Met., No. 9, 12 – 15 (1976).
V. M. Nagibin, “Special features of ferromagnetic properties of eutectoid and eutectic cementite,” Izv. Vysh. Uchebn. Zaved., Chern. Metall., No. 6, 92 – 94 (1982).
T. B. Massalski, H. Okamoto, P. R. Subramanian, and L. Kacprzak, Binary Alloy Phase Diagrams, ASM Int. Materials Park, Ohio, USA (1990), Vol. 1 – 3, 3589 p.
N. J. Petch, “Interpretation of the crystal structure of cementite,” J. Iron Steel Inst. (London), 149, 143 – 150 (1944).
V. I. Voronin, I. F. Berger, YU. N. Gornostaev, et al., “Composition of cementite as a function of the temperature. In-situ neutron diffractometry and results of ab-initio computations,” Pis’ma Zh. Exp. Teor. Fiz., 91(3), 154 – 158 (2010).
A. N. Rozanov, “Structure and properties of cementite,” in: Metal Science and Advanced Methods of Heat Treatment [in Russian], Mashgiz, Moscow (1955), p. 54.
M. A. Krishtal, A. A. Zhukov, and A. N. Kokora, Structure and Properties of Alloys Treated with Laser Radiation [in Russian], Metallurgiya, Moscow (1973), 192 p.
A. A. Zhukov, Geometrical Thermodynamics of Iron Alloys [in Russian], Metallurgiya, Moscow (1979), 232 p.
G. V. Kurdyumov, L. M. Utevskii, and R. N. Éntin, Transformations in Iron and Steel [in Russian], Nauka, Moscow (1977), 238 p.
K. V. Makarenko, “Bainitic hardening of iron from cast condition,” Metalloved. Term. Obrab. Met., No. 7, 29 – 32 (2007).
The work has been supported by Grant MD-1125.2017.8. of the President of the Russian Federation.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 4, pp. 3 – 9, April, 2019.
Rights and permissions
About this article
Cite this article
Kostyleva, L.V., Gapich, D.S., Novikov, A.E. et al. Variation of the Composition and Properties of Cementite in Heat Treatment of Tilling Machine Members from Chilled Cast Iron. Met Sci Heat Treat 61, 205–210 (2019). https://doi.org/10.1007/s11041-019-00401-6
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11041-019-00401-6