Results are provided for a study of the effect of different forms of ultrasonic treatment on properties of powder corrosion-resistant steel PH-1 prepared layer-by-layer with selective laser melting. Specimens are studied after ultrasonic cavitation-erosion and cavitation-abrasion treatment, and also ultrasonic surface-plastic deformation. After treatment microhardness and parameters of the micro- and sub-microgeometry of a surface layer are measured. Fields of application for this form of treatment are considered.
Similar content being viewed by others
References
V. M. Prikhod’ko, Utrasonic Technology in Manufacture, Operation, and Repair of Automobile and Tractor Engineering [in Russian], Izd. Tekhnoligraftsentr, Moscow (2003).
S. G. Konov, D. V. Kotoban, S. K. Sundukov, and D. S. Fatyukhin, “Prospects for using ultrasonic technology in additive production,” Nauk. Tekhnol. Mashin., No. 9, 28 – 34 (2015).
S. N. Grigor’ev, and I. Yu. Smurov, “Prospects for developing innovative additive production in Russia and overseas,” Innovatsii, No. 10, 2 – 8 (2013).
A. P. Nazarov, “Prospects for rapid prototype method of selective laser sintering_melting,” Vestn. MGTU Stankin, 1(4), 46 – 52 (2011).
A. P. Nazarov, “Features of the construction of machines for selective laser sintering,” Vestn. MGTU Stankin, No. 1(24), ISSN 2072 – 3172 (2013).
T. V. Tarasova, A. A. Filatova, and K. É. Protasov, “Methods of monitoring the grain size composition of corrosion-resistant steel powders of domestic production,” Vestn. MGTU Stankin, No. 1(36), ISSN 2072 – 3172 (2016).
T. V. Tarasova and A. P. Nazarov, “Study of process of modifying a surface layer and preparation of three-dimensional engineering components by means of selective laser melting,” Vestn. MGTU Stankin, No. 1(25), ISSN 2072 – 3172 (2012).
T. V. Tarasova, G. O. Gvozdeva, and E. P. Tikhonova, “Prospects of using laser radiation for surface treatment of light metals,” Vestn. MGTU Stankin, No. 2, 140 – 143 (2012).
A. P. Gulyaev, Materials Science: High School Textbook [in Russian], Metallurgiya, Moscow (1986).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 6, pp. 42 – 47, June, 2018.
Rights and permissions
About this article
Cite this article
Aleksandrov, V.A., Sundukov, S.K., Fatyukhin, D.S. et al. Ultrasonic Methods for Improving Object Surface Quality Prepared by Corrosion-Resistant Steel Powder Selective Laser Melting. Met Sci Heat Treat 60, 381–386 (2018). https://doi.org/10.1007/s11041-018-0287-1
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11041-018-0287-1