Advertisement

Metal Science and Heat Treatment

, Volume 59, Issue 11–12, pp 793–798 | Cite as

Removal of Carbide Net in Steel ShKh15 by Optimizing the Mode of Spheroidizing Annealing

  • E. V. Popova
  • A. P. Khomutova
  • I. V. Yuzhakova
  • A. M. Pilipova
  • M. E. Smulakovskii
Article
  • 27 Downloads

A metallographic study of the carbide phase in rolled sections from bearing steels ShKh15 and ShKh15SG etched in different reagents is performed. The steels are treated by different variants. The experimental results are processed with the aim to correct the mode of spheroidizing annealing of steel ShKh15. The characteristic of the “carbide net remainder” is reduced from 4 – 5 divisions of scale 4 of the GOST 801–78 Standard to 2 scale divisions.

Key words

bearing steel ShKh15 microstructure metallographic etching spheroidizing annealing carbide net remainder 

References

  1. 1.
    Yu. A. Geller, Tool Steels [in Russian], Metallurgiya, Moscow (1983), 526 p.Google Scholar
  2. 2.
    L. A. Poznyak, Yu. M. Skrynchenko, and S. I. Tishaev, Die Steels [in Russian], Metallurgiya, Moscow (1980), 244 p.Google Scholar
  3. 3.
    G. V. Lyashenko, V. P. Lyashchenko, and L. S. Lariontseva, “Transformations of carbides in cast and deformed bearing steels,” Metalloved. Term. Obrab. Met., No. 3, 25 – 29 (1983).Google Scholar
  4. 4.
    T. Jones, H. Kato, and D. H. Kirkwood, “Segregation and eutectic formation in solidification of Fe – 1C – 1.5Cr steel,” Mater. Sci. Technol., 19, August, 1 – 6 (2003).Google Scholar
  5. 5.
    A. B. Steblov, D. V. Lenartovich, I. V. Kotov, and S. V. Gunenkova, “Reduction of carbide inhomogeneity of rolled sections from continuously cast billet from steel ShKh15SG,” Stal’, No. 10, 56 – 58 (2006).Google Scholar
  6. 6.
    A. B. Steblov, V. I. Timoshpol’skii, D. V. Lenartovich, and S. V. Gunenkova, “Effect of heating factors on formation of carbide net in steel ShKh15,” Lit’e Metallurg., No. 2(34), 77 – 80 (2005).Google Scholar
  7. 7.
    Ya. R. Rauzin, Heat Treatment of Chromium Steel [in Russian], Metallurgiya, Moscow (1978), 280 p.Google Scholar
  8. 8.
    Yu. B. Bashnin, B. K. Ushakov, and A. G. Sekey, Heat Treatment Technology [in Russian], Metallurgiya, Moscow (1986), 424 p.Google Scholar
  9. 9.
    S. I. Il’in and Yu. D. Koryagin, The Heat Treatment Technology of Steels [in Russian], Yuzhno-Uralsk. Gosud. Universitet, Chelyabinsk, (2009), 120 p.Google Scholar
  10. 10.
    Yu. A. Geller and A. G. Rakhshtadt, Metal Science (Methods of Analysis, Laboratory Works and Problems) [in Russian], Metallurgiya, Moscow (1984), 384 p.Google Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2018

Authors and Affiliations

  • E. V. Popova
    • 1
  • A. P. Khomutova
    • 2
  • I. V. Yuzhakova
    • 2
  • A. M. Pilipova
    • 2
  • M. E. Smulakovskii
    • 3
  1. 1.“Severstal Management” CompanyCherepovetsRussia
  2. 2.“Severstal-Metiz” CompanyCherepovetsRussia
  3. 3.“Severstal” CompanyCherepovetsRussia

Personalised recommendations