Metal Science and Heat Treatment

, Volume 59, Issue 11–12, pp 689–696 | Cite as

A Study of the Cold Resistance of Pipe Coiled Stock Produced at Foundry-Rolling Works. Part 2

  • O. A. Bagmet
  • V. V. Naumenko
  • K. S. Smetanin

Results of a study of coiled stock from low-carbon steels alloyed with manganese and silicon and different additives of niobium and titanium are presented. The coiled stock is produced at foundry-rolling works by the method of direct rolling of thin slabs right after their continuous casting. The microdeformation of the crystal lattice and the crystallographic texture are determined. The conditions of formation of the most favorable structure and texture in the steels are specified.

Key words

foundry-rolling works controlled rolling microalloying cold resistance microstructure impact toughness cleavage x-ray diffraction analysis crystallographic texture off-orientation 


  1. 1.
    O. A. Bagmet, V. V. Naumenko, and K. S. Smetanin, “A study of the cold resistance of pipe coiled stock produced at foundry-rolling works. Part 1,” Metalloved. Term. Obrab. Met., No. 9, 9 – 14 (2017).Google Scholar
  2. 2.
    O. P. Shaboldo, Ya. M. Vitorskii, A. I. Shamshurin, and A. A. Kononov, “Formation of structure in β-titanium alloy during cold deformation and subsequent heat treatment,” Nauch.- Tekh. Vedomosti St.-Peterburg. Politekh. Univ., No. 2(195), 134 – 140 (2014).Google Scholar
  3. 3.
    H. J. Bunge, “Zur Darstellung Allgemeiner Texturen,” Z. Metallkunde, 56, 872 – 874 (1965).Google Scholar
  4. 4.
    M. L. Lobanov, A. S. Yurovskikh, N. I. Kardonina, and G. M. Rusakov, Methods of Study of Textures in Materials [in Russian], Izd. Uralsk. Univ., Ekaterinburg (2014), 115 p.Google Scholar
  5. 5.
    R. K. Ray and J. J. Jonas, “Transformation textures in steels,” Int. Mater. Rev., 35(1), 1 – 36 (1990).CrossRefGoogle Scholar
  6. 6.
    J. J. Jonas, “Transformation textures associated with steel processing,” in: Proc. Int. Conf. on Microstructure and Texture in Steels and Other Materials, India (2008), pp. 3 – 17.Google Scholar
  7. 7.
    R. D. K. Misra and J. P. Anderson, “Transformation textures in new ultrahigh strength hot rolled microalloyed steel,” Mater. Sci. Technol., 17, 116 – 118 (2001).CrossRefGoogle Scholar
  8. 8.
    E. J. Palmiere, C. I. Garcia, and A. J. DeArdo, “The influence of niobium supersaturation in austenite on the static recrystallization behavior of low carbon microalloyed steels,” Metall. Mater. Trans., 27A, 951 – 960 (1996).CrossRefGoogle Scholar
  9. 9.
    Yu. I. Matrosov, D. A. Linvinenko, and S. A. Golovanenko, Steel for Cross-Country Pipelines [in Russian], Metallurgiya, Moscow (1989), 288 p.Google Scholar
  10. 10.
    E. Pauletti, H. L. Haskel, J. P. Martinis, and A. Carvalho, “Influence of deamination on microtexture and JR curve in API X60 steel,” in: 13th Int. Conf. on Fracture, China (2013), pp. 1 – 9.Google Scholar
  11. 11.
    M. L. Bernshtein, Structure of Deformed Metals [in Russian], Metallurgiya, Moscow (1977), 432 p.Google Scholar
  12. 12.
    V. M. Khlestov and G. K. Doroshko, Transformation of Strained Austenite in Steel [in Russian], Izd. PGTU, Mariupol (2002), 407 p.Google Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2018

Authors and Affiliations

  • O. A. Bagmet
    • 1
  • V. V. Naumenko
    • 1
  • K. S. Smetanin
    • 1
  1. 1.Vyksa Metallurgical PlantVyksaRussia

Personalised recommendations