Mechanical properties and characteristics of the structure of welded joints of screw piles are studied. It is shown that cast tips from steel 25L do not meet the performance specifications for operation in the Northern climatic zone. Quality welded joints of screw piles can be obtained by semiautomatic welding in an environment of CO2 with Sv-08G2S welding wire.
Similar content being viewed by others
References
V. N. Zhelezkov, Screw Piles in the Power Industry and Other Industries [in Russian], Izd. Dom “PRAGMA,” St. Petersburg (2004), 115 p.
TU 5264-001-23290928–2013. Screw Piles. Performance Specifications [in Russian], OOO “Adgeziya,” Yakutsk (2013), 19 p.
GOST 6996–66. Welded Joints. Methods of Determination of Mechanical Properties [in Russian], Standartinform, Moscow, 23 p.
GOST 9454–78. Metals. Methods of Testing for Impact Bending at Low, Room, and Elevated Temperatures [in Russian], Izd. Standartov, Moscow, 13 p.
GOST 977–88. Steel Castings. General Performance Specifications [in Russian], Izd. Standartov, Moscow, 18 p.
Yu.M. Lakhtin and V. P. Leont’ev, Materials Science. Manual for Machine Building Educational Institutions [in Russian], Mashinostroenie, Moscow (1980), 493 p.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 7, pp. 60 – 64, July, 2016.
Rights and permissions
About this article
Cite this article
Golikov, N.I., Sidorov, M.M. & Stepanova, K.V. Effect of Welding Methods on the Structure and Mechanical Properties of Welded Joints of Screw Piles. Met Sci Heat Treat 58, 442–446 (2016). https://doi.org/10.1007/s11041-016-0032-6
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11041-016-0032-6